Performed FEA for drop object evaluation for compressor modules in Jansz project.Performed FEA for lifting, transportation, impact and drop case scenarios of MBCM (Magnetic Bearing Control Module) and Stroke tool skids in Jansz project.Analyze data of bolts tests (> 100) for different bolt diameters, coatings, threaded/ unthreaded ends and prepare an excel sheet to generate torque values and check bolt utilization for torque applied as per NORSOK U-0001.Perform FEA for lifting, transportation, and impact load scenarios of Running tool in Kristin-Q/ Lavrans project.Detailed analysis of Subsea Control Module skid during the standardization of product in MOHO project.

• Optimization of Gate Valve by checking feasibility for low strength steel.• Development of manifold structure and validating design.• FEA of Injection Block Valve and Barred Tees • Analysis of Pipeline end termination structure for Mero-II Project.• Pile structure check for lifting loads, buckling capacity and operation loads.• Participate in Design review meeting with internal and external stakeholders involved in projects.• Co-responsible for development activities in analysis team to increase teams analysis capabilities.• Co-responsible for Resource mapping for current and expected projects

Pipe wall thickness calculations, On-bottom stability calculations, Pipeline Expansion Analysis, On-Bottom Roughness analysis, Cathodic Protection design, Allowable Free Span Calculation, Spool flexibility analysis using beam and shell model in Abaqus.

Consultant - Pipelines working with WorleyParsons India Pvt. Ltd. for Saudi Aramco flowlines project.

Pipeline/Piping Stress Analysis using Abaqus/Caesar II, Global buckling and local buckling analysis of subsea pipeline for anchor drag scenario using Abaqus following DNV RP F110, DNV RP F111 and DNV RP F101, Estimation of pipeline affected during anchor drag event using FEM and standards, Material Take off, Review of Alignment Sheets, calculation of loads on piping supports.Projects Undertaken: Emergency Pipeline Repair System for subsea gas/gas condensate pipelines for Qatar Gas.Reassessment of existing oil flowlines for stress and upheaval buckling for ADCO. Stress assessment of cross country oil and gas pipelines for KOC.

Activities include : SNIF (Strain notch intensification factor) calculations for subsea pipelines using Abaqus software, Ovality predictions due to bending, Calculation of allowable weld flaw sizes using BS 7910, Material modelling using Ramberg-Osgood model, ECA (Engineering Criticality Assessment) report preparation, Development of In-house program to calculate allowable weld flaw sizes using BS-7910. Industrial Projects:- Installation works for Gina Grog pipeline in Norwegian Shelf.- Installation works for Edward Grieg pipeline project.- Installation works for Polarled pipeline project.Research Projects- Study of fracture behaviour in High Strength steel (S690) material using Stress modified strain model in Abaqus.

Thesis : Experimental investigation of effect of residual stress on fatigue crack growth in pipelines with allowance for scale effects. Grade : 8- Four point bend full scale pipe tests to investigate effect of residual stresses on fatigue crack growth rate.- 3 point single edge notch bend tests on strip specimens to compare the fatigue crack growth rate of pipe specimens and strip specimens.- Design and construction of four point bend test-rig using analytical calculations and FEM simulation in Abaqus to carry out experiments.- Develop the reasoning to explain the cause of behaviour observed during analysis.

• Preparation of RFQ for Subsea and Onshore pipelines, Preparation of Specifications for Marine Survey & Onshore Pipelines, Pipeline Wall thickness calculations, Road/Rig Crossing Calculations, Upheaval Buckling Calculations, Stress Analysis of Buried and Above-ground pipelines, Preparation of Material Requisitions, Technical Bid Evaluation & Review of Alignment sheets & Standard drawings• Engineering, Procurement, Construction for Pipeline Tie-in Works at SE for Abu Dhabi Company for Onshore Oil Operations, UAE

• Preparation of RFQ for Subsea and Onshore pipelines, Preparation of Specifications for Marine Survey & Onshore Pipelines, Pipeline Wall thickness calculations, Road/Rig Crossing Calculations, Upheaval Buckling Calculations, Stress Analysis of Buried and Above-ground pipelines, Preparation of Material Requisitions, Technical Bid Evaluation & Review of Alignment sheets & Standard drawings• Engineering, Procurement, Construction for Spiking Gas Compressor Project for Abu Dhabi Company for Onshore Oil Operations, UAE• Pre-Bid Engineering for Offshore Engineering for Ras Issa Terminal in Yemen

• Preparation of RFQ for Survey of Onshore pipelines, Pipeline Wall thickness calculations, Road/Rig Crossing Calculations, Stress Analysis of Buried and Above-ground pipelines, Preparation of Pipeline Route Layout & Review of Alignment sheets & Standard drawings• Engineering and PMC for 10” x 15 Kms Cross country pipeline project from Bahadurgarh to Tikrikalan of Hindustan Petroleum Corporation Limited, India • Engineering for 12”X1.4 km Heat recovery Steam generation pipeline of GAIL

Onsite: Welding Engineer of 8 inch Diameter Cross Country Gas Pipeline for 50 kms. Preparation of M.T.O for the AGI Stations Piping. Interpretation of Piping GAD Drawings & Isometric Drawings. Performing Non Destructive Tests like Dye Penetrant Test,Magnetic Particle Tests to ensure the Quality of welds. Site Engineer for Installation of Skin Effect Heat Management System(SEHMS).This Involves :1. Use of Electric Resistance Technology to maintain a uniform temperature throughout the pipeline.2. Use of Polyurethane foam(Polyol+Iso) coating for thermal insulation & HDPE for water jacket.3. Use of Sleeve Welding for Jacketing of Girth Welds.4. Use of Foam Filling for Insulation around Girth Welds. Coordinating with Companies Tyco & PIH for foam filling and Sleeve Welding. Inspection of thickness of Epoxy resins using Holiday Detector. Co-ordinating with Client HSE people for Proper Application of HSE Rules & Regulations.Project Management:MIS Management Participating in project review meetings for evaluating projects progress. Supervising Planning and scheduling, Progress Monitoring, Monitoring activities of contractor and subcontractor. Follow-ups and Updation of Staff and Machines involved in whole Project. Preparation & Updation of Organisation Charts. Preparation of Planning Schedules for Site. Coordinating with Kazstroy Service for Progress reporting and monitoring.