 Drive Test on 2G, 3G and 4G sites (Indoor and Outdoor). Complete SSV of on air sites. Bench Marking and Clusters of specific area. RNC Testing in specific areas covering sites under one BSC. Handovers, Data and Coverage Tests. Making Log files and cell sites reports and extract files. To collect and analyze subscriber complaint, locating the network problem and solve the problem. Perform DT in predefined clusters and routes, record the data in details. To implement and perform Site On Air Test as per ATP requirements on time. inter-cell handovers and handover between indoor & outdoor cells. To plan a drive test route either for single site or for cluster of sites. Initial site verification performing all necessary calls, Handovers, GPRS, and EDGE tests as per procedures. Data collection using TEMS investigation GSM/WCDMA V 9.1,testing intersystem HO scenarios (2G to 3G/3G to 2G) To analyze drive test data using MapInfo V 8.5 with its processing tools and identify the coverage holes, causes of the drop or blocked calls, etc. To check for in-building coverage for hot spots, hotels, Malls, basements, corporate customers, and recommend in-building solution if Macro cell coverage is not satisfied. Site investigation for checking the TRX signal strengths and handover statistics. Detailed drive test in customer complaints areas. Scan Test in idle mode to check the serving frequencies. Checking all values handover relation with neighbor cells. Prepare Site Investigation and trouble-shooting reports. Complete Drive test for checking coverage of proper signal strength and quality. Site Auditing for the new and existing site for checking mechanical tilts, electrical tilts, and Azimuths etc. Perform the Download and Upload throughput tests on each sector of the site and make sure to get maximum achievable DL & UL speeds at the best point of each cell with the best BLER & SINR Parameter values.

Handled the task for taking the various parameters like Rx level, Rx Quality, LAC, BSIC, etc. using TEMS INVESTIGATION 9.1, 10.5,11.01,12Physical Parameters Verification of new sites as per the planned data.Identification of coverage holes in the area of interest based on Customer complaints.Monitor & Ensure consistent RSRP, RSRQ and SINR parameters performance for better coverage of the site.Perform coverage optimization by altering antenna down-tilts (Mechanical) or azimuths to ensure better coverage around sites.Coverage Plan including Highways coverage planning.Determine actual network coverage & performance by Drive test using Drive Test Tool TEMS.Site Audit and performing study for antenna position, bore, and tilt to meet with desired coverage with minimum predicted interference and re-engineering.Prepare the SSV and post reports as per requirements.Perform overall Site/Cluster optimization for commercial GSM/UMTS/LTE networksInterference analysis, co-channel, adjacent and external interference by planning tool and real network (drive test).Can find the existing partial or full cross feeder & can give suggestion to the installation team for eliminating cross feeder.Have done frequency scanning using TEMS.Have Done Channel Verification for multiple Radio’s.Preparation of Business Plan for new BTS Site proposal Plan with reference to the existing sites in the Network.Can work on map info for day-to-day Physical & Geographical updating.