Aaron Hall Email & Phone Number

Indianapolis, Indiana, United States

Large Capital Project Quality Management

• Responsible for performing Mechanical Integrity Inspections, Inservice Inspection on Boilers, Pressure Vessels, Storage Tanks, and Piping.• Responsible for walking down P&ID’s and ISO’s for accuracy and creating ISO’s.• Responsible for advising customers on Code and Jurisdictional requirements for project completion.• Responsible for performing Welder and Welding procedure testing, Reviewing, Writing, and Approving PQR, WPS, and WPQR’s• Responsible for performing 3rd party Vendor auditing.

Louisville, Kentucky, United States

API Inspector will support our process equipment inspection programs to align with corporate standards and best practices related to Mechanical Integrity and Quality Assurance (MIQA) programs. Performing API Pressure Vessel, Piping, FRP and Tank inspections.Documenting and transmitting of inspection results, and making recommendations as appropriate for repair/upgrade/retirement of equipment.Defining and approving repairs to fixed equipment, per the applicable ASME/API standards and Chemours Best Practices (RAGAGEPs), potentially including auditing and evaluation of contracted repair organizations, and inspection of repair work.Developing inspection and test plans for plant equipment, inspecting/examining equipment per applicable ASNT, ASME/API Standards and Chemours Best Practices (RAGAGEPs). Managing inspection data in systems such as Ultrapipe®, Operational Sustainability software, SharePoint and SAP/PM.Developing and Maintaining inspection and repair scope documentation and work completion QA- potentially including NDE procedures, welding procedures and inspection plans.Coordinating the work of NDT Inspectors/examiners including the IRIS, Eddy Current and auditing and evaluation of their workPerforming QA and inspection activities for incoming equipmentSupporting site MI-QA-Improvement initiatives and Infrastructure repair workCoaching and Developing site API resources

East Chicago, Indiana, United States

Responsible for QA Function on Large Capital Project with 17,000 ft of pipe and supporting structures totaling $10,000,000 with Zero Returned Turnover Packages.Turnaround and Maintenance QA/QC Supervisor.Develop all Customer packages for turnover and project clearing by Customer QA Department, Walked down packages for accuracy & specification compliance, i.e. ISO’s, P&ID’s, NDE, HYDRO’s, Valve/I&E Travelers, Flange Travelers, Coating’s & Insulation Reports, MTR’sCoordinate all Inspection activities including, NDE, Mechanical, Coatings, and Insulation.Schedule all daily activities related to QA function and develop all QA reports both internal and customer driven.Conduct Inspections relevant to Piping Manufacturing and Installation, Vessel Repair, Tank Repair, and Clear Subcontractor QA packages i.e. Electrical & Civil

Lafayette, Indiana

Successfully lead company through a joint ASME/NBIC Audit to renew the company "R" Stamp and acquire a new "PP" Stamp with ZERO Non-Conformances.Turnaround and Maintenance QA/QC Supervisor.Successfully Completed over 50 ASME/NBIC repairs on various Pressure Retaining Item's with ZERO Non-Conformances.Develop all Customer packages for turnover and project clearing by Customer QA Department, Walked down packages for accuracy & specification compliance, i.e. ISO’s, P&ID’s, NDE, HYDRO’s, Valve/I&E Travelers, Flange Travelers, Coating’s & Insulation Reports, MTR’sInstituted Company Data Management plan that decreased annual budget spending by $13,000 annually and successfully reduced time required for completion of field repairs.Over seen all Boiler, Pressure Vessel, and storage tank repairs in the shop and field to various codes including NBIC, ASME Section VIII DIV-I, Section-I, API 510, and API 650/653. Over seen all Pipe production QA to various codes including ASME B31.1 "Power Pressure Piping", B31.3. Conduct all required Weld testing and manage company welding documentation for multiple locations including Bend test, Tension test, Macro, and sectioning. WPS, PQR, WPQR, BPS, BPQ, and BPQR to ASME-IX and AWS codes. Conduct NDE of various items VT, PT, MT, and UTT to various codes and standards.

Created new welding curriculum which lead to a 25% increase in successful welder certification and company savings of $5000.00 annuallyConducted 3rd Party Inspections, Developed ITP’s and Walked down Packages for Customers.Conducted over 300 Welder Certification TestsJob requirements included but were not limited to, in field weld inspection in various codes in various NDE methods, VT, MT, PT, LT, UTT, RT interpretation, Various destructive testing methods, Bend, Macro, and Tension testingCompany Welding Procedure Development in various codes i.e. AWS, ASME Section IX, and API 1104Welder training/certification in various codes i.e. (AWS, ABS, ASME, AWWA, API) Company Data analysis and troubleshooting, TMDE Equipment calibration/management.

Job requirements included but were not limited to, tank & pipe QA/QC, welding quality control, Hydrostatic testing, Pressure testing, Penetrant testing, welding repair, welding, steel fitting, pipe welding, pipe fitting operating a variety of heavy construction equipment, and solving minor electrical problems. All welds have been within specified quality code in a 13 month periodOperate several different types of heavy construction equipment

Job requirements included but were not limited to, welding, Pressure testing, welding repair, steel fitting, pipe fitting, operate a variety of heavy construction equipment, and solving minor electrical problemsAll welds were within specified quality code in a 24 month period Welder/Fitter on a mobile 6 man Elevated tank team required to work independently and take initiative to solve problems quickly and safelyConsistently conducting consequence management and changing jobsite locations

Fort Drum, Ny

Supervised $50,000,000 of highly sensitive equipment-efforts lead to zero loss in an 8 year periodCreated new departmental procedures including organizational maintenance and tracking systems for 30 vehicles and hundreds of weapon systems with a total value of over $25,000,000-efforts lead to a 15% increase in productivity and a savings of $25,000 annually Supervised a team of 5 staff members and 30 subordinates, was responsible for scheduling, budget management, training, logistical supply chain management, safety and regulatory enforcement and compliance, Preventive maintenance and accountability of equipment, and discipline

Job requirements included but were not limited to, welding, Pressure testing, welding repair, steel fitting, pipe fitting, operate a variety of heavy construction equipment, and solving minor electrical problemsAll welds were within specified quality code in a 22 month period Welder/Fitter on a mobile 6 man Elevated tank team required to work independently and take initiative to solve problems quickly and safelyConsistently conducting consequence management and changing jobsite locations

All welds were within specified quality code in a 2 year periodSupervised a 5 man bridge construction teamOperate several different types of heavy construction equipment

Certificate, Api 570, Pass

Activities and Societies: API, ASME, WELDING, INSPECTION, ENGINEERING, METALLURGY, DAMAGE MECHANISMS, COATINGSPiping Inspector

Certificate, Api 510, Passed

Activities and Societies: API, ASME, WELDING, INSPECTION, ENGINEERING, METALLURGY, DAMAGE MECHANISMS, COATINGSPressure Vessel Inspection

Certificate, Api 653, Passed

Activities and Societies: API, ASME, WELDING, INSPECTION, ENGINEERING, METALLURGY, DAMAGE MECHANISMS, COATINGSAbove Ground Storage Tank.

Certificate, Asme Bpvc Section Ix And Viii Div-1, Pass

6 month online ASME Endorsment Training Course

"R" Stamp Repair Seminar, Boiler & Pressure Vessel Repair, Pass

Activities and Societies: ASME, NBBI, AWS, API3 Day Seminar on administrative and code procedures for the succesful repair of ASME Boiler.

Aws Cwi/ Advanced Welding Technology, Non Destructive Examination/ Welding Engineering

Activities and Societies: American Welding Society, American Petroleum InstituteSMAW, FCAW, GMAW, GTAW, Orbital Welding, Robotic Welding.

Professional Development Course, Military And Strategic Leadership, Passed

I attended two professional development courses while in the Army. Primary and Advanced, key areas of focus included: Leadership, Team.

High School Diploma