Experienced PM, Business development CNSLT and Master Trainer, with 12 years of experience focusing on managing, implementing, business development, and train on 25+ industrial and software projects in MENA, Africa, and Europe.Sample of Projects : Consultancy Services and management for Construction 50 MWp PV Power Plant in Zafarana, Egypt, (Zafarana 50 MW Grid-connected PV Power Plant project). 2021-2023- funded by kfw Consultancy Services and management for Construction & Upgrading (Tendering and Implementation) of EEHC/AEDC-DCCs (Alexandria East Distribution Control Centre), 2021-2022. Consultancy Services and management for Construction & Upgrading (Tendering and Implementation) of EEHC/ NCEDC -DCCs ((Nasr City &New Cairo Distribution Control Centre), 2021-2022. Consultancy Services and Technical assistance during the Implementation and warranty stages of the Canal Regional Control Center (CANRCC) Upgrade Project” Consultancy Services and Construction Supervision for Savola treatment unit Buildings 2 Consultancy Services, Full ICA Design of below projects;1- Sewage Networks & Pumping Stations - Al-Aziziyah Project, Al-Khobar, KSA2- D&B WTL FROM RE3 TO MOUNTAIN RESERVOIR, NEOM, KSA3- Development of Existing Lift stations, Discharge Lines, and Gravity Lines in the Province of Al-Qatif , KSA 4- NEOM’S SPINE WATER TRANSMISSION LINE WEST (SWT), KSA5- New Liquid Detergent Factory, Misr Petroleum, Ministry of Petroleum, Alexandria, Egypt6- New Base Oil project, Chevron Egypt Lubricants, Egypt7- Water Treatment Plant, Assiut Hydrocracking Complex – ANOPC, Egypt Engineering, Programming, Commissioning, start-up of below projects:1- Okbai Power Plant, GIS, and substations, Schneider Italy with SAIPEM "ENI" as EPC Nigeria2- Agios Nikolaos Combined cycle gas turbine, Greece 3- Fuel System Infrastructure in Doha Power Station, Ministry of Electricity and Water, Kuwait4- Jubail Independent Water Plant, KSA5- Teeside Biomass Power Station, England6- Shuqaiq 3 Independent Water Project, Ministry of Water and Electricity, KSA7- Oman Petro. Development Company, Haima West Combined Cycle, Oman8- Basin Liquid Bulk Terminal, Sokhna Port, Sonker, Egypt9- Electromechanical and Automation autoclave projects in Plena, Egypt 10- Boric Acid feeding system in Henkel, Egypt11- Monorail cranes system OMIS-CRANE” Italy in the administrative capital with Orascom12- Alarich Desalination Plant with UNIHA, Egypt13- Batangas Cement Plant, Philippines & Qatar National Cement Company, Qatar
-
Co Founder And Managing DirectorSisCairo, Eg
-
Co Founder & Managing DirectorSuperior Integrated Solutions Jan 2020 - PresentCairo, Cairo, Egypt* Developing and implementing the company’s business strategies* Creating, executing, and monitoring the performance of comprehensive business plans* Establishing internal company policies, procedures, and legal protocols* Overseeing the investments, business ventures, and financial stability of the company* Overseeing employment, professional development, and employee performance activities* Establishing long-lasting relationships with shareholders, partners, local authorities and regulators* Creating a company culture and monitoring its adoption* Representing the company at public events and attending conferences
-
Process Control & Scada Lead EngineerEgec Jan 2016 - PresentEgypt* Design automatic control , Instrumentation systems and SCADA• DCS, PLCs, and SCADA Specification and Design • Conceptual Studies • Planning, Cost estimation.• Detailed design (P&IDs and Specifications) • Technical bid Documents• BOQs, RFQs, • Bid Evaluation • Prepare Installation Documents. • Startup support• Supervising for factory acceptance testing (FAT) and commissioning. -
Application Design Engineer Act As Team LeaderSchneider Electric Apr 2018 - Dec 2021Egypt And Europe* Configure, modify, program, and test process control methodology:- DCS platform "Foxboro" - Triconex for Emergency shut down system “ESD”, fire and gas system “FGS”.• Using C++, C#, and Assembly for scripting at Foxboro and Wonderware platform. • Create process control and SCADA displays Using the "Wonderware" platform.• Develop sustainable control algorithms for analog, discrete, and critical process components.• Build, configure, and test advanced process graphics in HMI.• Hardware cabinet design. • Software Validation and Verification Testing.• Design and Selection of Instrumentation Measuring systems.• Conduct training courses on multiple aspects of Process Control &Instrumentation Measuring systems. -
Dcs And Automation ConsultantDeutsche Gesellschaft Für Internationale Zusammenarbeit (Giz) Gmbh Sep 2020 - Jan 2021EgyptAssessing and continuously improve the Industrial Automation systems” DCS, PLCs, SCADA “software Labs, Industrial machine and production line. 2. Developing training agenda for each technical training 3. Providing learner-cantered training programs utilizing the available equipment, software, and Demo Units such as PCS7. 4. Optimizing processes & Support the establishment of a Quality Management System (QMS) .ISO 9001,9004, 21001. 5. Ensuring good customer care through a robust Customer Relation Management system (CRM) -
Automation Project EngineerThe Automation Alliance Llc, Switzerland Sep 2016 - Sep 2017* Design, program, simulate, and test software for automated machinery and process” Allen Bradley& SEIMENS.”* Prepare technical offers for new Automation, Instrumentation, and Electrical projects and Make site surveying.* Project management including Preparation, presentation, and project plans. -
Automation EngineerAsec Automation (Asa) Feb 2015 - Aug 2016EgyptJob responsibilities include the followings:• PLC Programming, HW Configuration, and DCS networks.• Design Automatic Control Systems and full SCADA using PCS7, WinCC.• Establish FAT test with client, Commissioning, Startup, and Troubleshooting. • Implement/maintain interlocks test procedures. • I/O Mapping and SCADA/HMI Drawing. • As-built documentation. • Troubleshoot PLC hardware, I/O racks, and associated control system hardware.• Manage administrative and documentation requirements for tasks such as configuration backups, software revisions, downloading configuration changes, graphics development and modification, and implementing software changes of design. -
Senior Technical InstructorFreelancer Apr 2011 - Apr 2015Process control, Industrial Software Trainer,” Freelancer” Job responsibilities include the followings:• Deliver and assess Process Control, Instrumentation and Maintenance engineering courses to learners and grantee the best practices to them• Develop and maintain the current Process Control, Instrumentation and Maintenance engineering course material including lesson plans and schemes of work for a range of courses.• Review course content and delivery methods on a regular basis.• Ensure all relevant evidence of learning is accurately and correctly documented and completed for each learner. • Provide feedback and support to learners on a one to one/ group basis. Assist in the overall development of the training center. • Assist in the delivery of course material outside of the subject of Process Control & Instrumentation engineering.Companies & Partners 1. The Egyptian Ministry of Military Production, “Factory 300&18&9”. Egypt Feb,2020. 2. Suze International Nitrate Company “Sinco”. Egypt Sep&October,2020. 3 .MAS Automation 2018 ---> Present 4. Information Techn. Institute “ITI” Ministry of communication. and Information technology. Egypt2018,2019 5. Mediterranean wool industries, Schneider Group. Egypt July& Aug 2018 6. Contec Egypt for Measurement Systems. Egypt ,2017 -
Process Equipment EngineerMetra Computer Llc Dec 2012 - Jan 2015Egypt• Installing and Maintaining Maintenance for Electronics Manufacturing machines (Surface Mount Technology “SMT") under supervision of Japanese consultant “FUJI Electric Global” • Execute process improvement solutions to business problems, using data analysis, and optimization tools to support strategic process improvement plans.
Mohamed A. Abdelghaffar Skills
Mohamed A. Abdelghaffar Education Details
-
Exllent -
Business Administration And Management, General -
Communication And Electronics
Frequently Asked Questions about Mohamed A. Abdelghaffar
What company does Mohamed A. Abdelghaffar work for?
Mohamed A. Abdelghaffar works for Sis
What is Mohamed A. Abdelghaffar's role at the current company?
Mohamed A. Abdelghaffar's current role is Co Founder and Managing Director.
What schools did Mohamed A. Abdelghaffar attend?
Mohamed A. Abdelghaffar attended Ihk-Akademie Koblenz E.v., The American University In Cairo, Al-Azhar University.
What are some of Mohamed A. Abdelghaffar's interests?
Mohamed A. Abdelghaffar has interest in Social Services, Children, Education, Poverty Alleviation, Disaster And Humanitarian Relief, Human Rights.
What skills is Mohamed A. Abdelghaffar known for?
Mohamed A. Abdelghaffar has skills like Engineering, Plc, Automation, Microsoft Office, Plc Programming, Maintenance And Repair, English, Preventive Maintenance, Instrumentation, Equipment Maintenance, Smt, Microcontrollers.
Free Chrome Extension
Find emails, phones & company data instantly
Aero Online
Your AI prospecting assistant
Select data to include:
0 records × $0.02 per record
Download 750 million emails and 100 million phone numbers
Access emails and phone numbers of over 750 million business users. Instantly download verified profiles using 20+ filters, including location, job title, company, function, and industry.
Start your free trial