Muhammad Abdullah Badar Email & Phone Number

Riyadh, Sa

Riyadh, Saudi Arabia

Directs and monitors assigned office or project startup and operations which may include review ofdesign for station operability, preparation of operations manuals, coordination with constructionduring field check out and pre-commissioning and testing and execution of the startup in the field.Prior to T&C activities verify the site readiness as per Pre Com and IRN approval from client.Apply STT (Sanction to test ) permit in Q4 permit for energize the downstream feeder for testingactivities.Update system tag description as per approved electrical IRN in Q4 portal.Apply de isolation permit for internal electrical testing.Perform internal testing for Mechanical system like Air Handling Units , CRAC units , Chillers , CHWP ,FCU’s, Pressurization Fans , Exhausts fans , DX split units .Internal Testing for CBS, LCP , SPAL , MCCB’s , MDB’s & EMDB’s like receptacle test , feeder cubicle ,Variable Speed Drive test , Vendor test .Walk down systems and validate construction to commissioning turnover acceptance.RaiseTNF (Testing notifiction form) to client for testing activities related to MEP systems.Prepare ITR’s (Inspection Test Records) to close TNF.Coordinate with vendor for test procedures related to MEP systems.Attend weekly T&C meeting with client T&C team.Update PAC 1 & PAC 2 report as per approved TNF.Coordinate with construction team for closure of T&C blockers.

Yammah Palace , Riyadh - Ksa

Handling HVAC works at site.Quantity takeoff of all the HVAC works.Submitting inspections after ensuring that the work is done as per the Approved Specifications,Drawings and Method of statementsInterfacing HVAC system with Building Management system.Reviewing BOQ as per site condition.Attending with the Consultant for Inspections.Assisting Testing & Commissioning (Air Balancing and Water Balancing )Had worked on operation and installation of Air Handling Unit & Fan Coil Units for central HVACsystem.Reviewing the design/shop drawing. Always following the updated / revised drawing andsubmitting the variation report to the contracts dept.Ordering the Required material as per Specifications.

Riyadh, Riyadh Region, Saudi Arabia

Inspection of electrical construction activities as per approved Inspection Test Plan, MethodStatement and Project Specification.Routine, Surveillance and witness Inspection of MEP related activities as per Inspection Test PlanLV system, Lighting Control System, Small Power System, signage system, Earthing and Bondingsystem, Access Control, BMS System, MDB/SMDB Panels, UPS/CBS system, as per projectrequirements, codes and standard.Inspection of all Electrical Installation from first fix to third fix.Installation Inspection of LV Switchgears and including MDB, SMDB, UPS, CBS, MCC, LCP, DCP/DDCPanels.Inspection of Pendant (Asymmetrical & symmetrical beam) lighting fixtures.Pulling and termination of power and communication cables as per approved schedule.Witness the Various tests carried out during execution of works i.e. earth resistance test,insulation test for wires and cables etc.Inspection for the installation of Conduits and fittings (above and below ground), Cabletrays/ladder, cable trunks, racks and Cables, Junction Boxes, Control Panels, wiring terminationas per the project specificationRaising inspection for installation of Bus duct, disconnected switches, FCU disconnectedswitches.Following site activities related to Non Conformity Report (NCR), Corrective Action Plan (CAP)and Preventive Action Plan (PAP) if required and follow up to the closing.Inspection for embedded and exposed raceways PVC conduit, EMT Conduit and RGS Conduitinstallation for electrical wiring and cabling.Inspection for installation of lighting switches, Single & Duplex power receptacles, 3PhaseSpecial Purpose Receptacles, Floor mounted power receptacles.Installation Inspection of Grounding and Lightning System.Perform Material Receiving Inspection on Power Cables, MV Switchgear and Power Transformer,Lighting System Accessories, power accessories, LP, DB, MDB.

Yanb’U Al-Bahr Governorate, Saudi Arabia

Inspection of Electrical Systems such as Panels and distribution boards , central battery systemetcInspection of low voltage cables as per approved SLD and panel schedule.Continuous Checking on the field job and verifying as per the Specification, Data Sheet, IFcDrawing and Codes and Standard.Assures Material delivery and Installation as per Approved Material Standards andConformance Standards.Closing of Punch List raised by the Client during site inspection.Prepare MIR, MAR for the approved material as per project specification and raised them toClient for Inspection.Inspection as per IEC and NEMA v2 standards for trunk system, cable

Makkah , Ksa

1) Raising (Request for information) RFI, ECR (Engineering change request) and plans and analyses all possible construction methodologies and recommends to the Construction Manager for approval prior to execution at site.2) Continuous Checking on the field job and verifying as per the Specification, Data Sheet, IFC Drawing and Codes and Standard. Discussing with execution team in any discrepancy found issuing Observation report, (NCR), (CAP) & (PAP) if required and follow up to the closing.3) Installation and inspection of Telecom cabinet junction boxes (waterproof) for different low current systems like CCTV’S, PID’S, SMATV, IP telephony and Access Control.4) Inspection for embedded and exposed raceways PVC conduit, EMT Conduit and RGS Conduit installation for electrical wiring and cabling.5) Inspection for Cable insulation test and (Hi-Pot) Test.6) Executing LOTO Procedure for each & every work.7) Witnessed for (ELI test), (ECC Test) and (IR Test), (ELCB test) and Commissioning as per approved drawings by the consultant.8) Installations of CCTV cameras with all of its accessories which include NIN(Fixed angle), NDN (Wide angle), PTZ and EMERGENCY cameras including media boxes, optical fiber, and UTP (CAT 6) cables according to the BICSI standards of installation.9) Test the cable using UTP cable verifier & see that transmit signals will reach another terminal of wire without errors. 10) Installation inspection of trunk system, cable ladder/cable tray through elcometer or galvanization meter inside the building. Conduct OTDR test for fiber optic cable & load test of cable trunk (HILTI test) according to standards.Inspection of Work according to shop drawings, make and verify as Built, Coordination drawing, Single Line Drawing.Coordinates with Client / Consultant’s representatives for any site instructions and inspection of work.Raise NCR (Non- Confirmation Reports) and Surveillance Report for the non-conformities on site and for material received.

Abu Dhabi

1) Planning, controlling and monitoring the actual installation, testing and commissioning of all Electrical low voltage, Medium voltage works in the project.2)Interprets construction drawings and studies the contract documents and applicable standards or specifications prior to execution of any jobs.3) Plans the execution of all electrical related works and coordinates the works to mechanical and civil groups.4) Aware of single line riser diagram for lighting control panel, power, low current systems, Layout of cable routing.5) Installation of Cable tray, Duct Bank, Cable Gladding, cable trunks & Conduits Installation as per drawing and according to adjustment to site requirements.6) Estimates, prepares and assigns the resources such as manpower, materials, consumables, equipment, tools, etc., required for all electrical and related works prior to execution. 7) Installation of grounding system, Street Lighting Panels, MDB, DB as per standards of DEWA and ADWEA.8) Ability to design, execute, feedback and upgrade Electrical System based on ISO 9001 requirements in parallel of international codes and standards published by ASEE (American Society of Electrical Engineers), ASTM (American Society for Testing and Materials ), ISO (International Organization for Standardization) and National Electrical Manufacturers Association (NEMA).9 Testing & commissioning of 400/220/132/33/6.6/0.415 Kv substation, control& protection scheme checking, testing of protective relays, cable schedule preparation.

Hattar , Pakistan

Maintenance of various type of Field & Control Room Instruments that are interloping with Programmable logic Control (PLC). Calibration and Troubleshooting of all type of instruments Pressure , Flow, Level, Temperature, , CO Analyzers , Control Valves Shut off ,Control Valves, Thermocouple , RTD, Transmitters, Switches etc.Ensure the work according to PID drawing . 2) Technical maintenance skills on Proximity Sensor, Pressure switch, Limit switch, level transmitter, Temperature Transmitters (RTD), Pressure Gauges, Temperature Gauges, pressure transmitter, thermocouple, Solenoid valves Weigh Bridge, Level Control Valve (LCV), Temperature Control Valve (TCV) Pressure Control Valve (PCV), Indicators in flow line of cement plant.

Islamabad , Pakistan

1) Installation, calibration and loop checking of the field instrument through P&I drawing. 2) Maintenance of various type of Field & Control Room Instruments that are interloping with Programmable logic Control (PLC). 3) Calibration and Troubleshooting of all type of instruments Pressure, Flow, Level, Temperature, CO Analyzers, Control Valves Shut off , Control Valves, Thermocouple, RTD, Transmitters, Switches etc.

Wah Cantt , Pakistan

Maintenance of different Cutting, Grinding Machines. Load Distribution from 33kv transformer to substations .Primary and Secondary distribution of power electricity. Troubleshooting of transformer through Open Circuit Test and Short Circuit Test

Electrical And Electronics Engineering, Be Electrical Engineering

Osha, Safety Engineering, Excellent

Ielts, English Literature (British And Commonwealth)