Adam Sibal Email and Phone Number
Adam Sibal work email
- Valid
- Valid
Adam Sibal personal email
I am a Ph.D. candidate in Civil and Environmental Engineering at the University of Illinois Urbana-Champaign, with a focus on energy-water and environmental sustainability. My research aims to assess the replacement potential of traditional chemical manufacturing methods with green sustainable electrocatalytic processes, using techno-economic and life-cycle assessment models, data science techniques, and geospatial and temporal data. I have a strong background and interest in natural gas, LNG, and CO2 mitigation and reuse, as well as a master's degree in Engineering and Technology Management and a bachelor's degree in Chemical Engineering. I was formerly Energy Modeler at the International Energy Agency (IEA), where I conducted research, modeling, and analysis on various technological pathways to decarbonize industrial sectors and built a global energy and emissions model of plastic recycling. I am also a Senior Research Associate at at Global Efficiency Intelligence (GEI) focusing on cement, steel and chemical sector decarbonization and embodied carbon research. I have co-authored multiple reports that provide insights and recommendations on the current and future trends, challenges, and opportunities for green and low-carbon manufacturing processes and critical minerals.I am fluent in English and Spanish and learning French
Decarbind
View- Website:
- decarbind.com
- Employees:
- 1
-
Founder And Principal Consultant Decarbind | Industrial Decarbonization Research And StrategyDecarbindDallas, Tx, Us -
Research Assistant & Ph.D. CandidateUniversity Of Illinois Urbana-Champaign Jun 2021 - PresentUrbana-Champaign Area• Developing techno-economic assessment (TEA) and life-cycle assessment (LCA) models to assess the replacement potential of traditional chemical manufacturing methods with green sustainable electrocatalytic processes.• Current research focuses on ethylene and propylene conversion to their respective oxide and glycol forms and the conversion of low-value glycerol coproduced with biodiesel to value-added chemicals and fuels.• I use data science techniques coupled with temporal and geospatial energy, water, and production data across the U.S. to provide a framework for the implementation of the technology and where it will have the greatest impact.• Provide iterative feedback to the project’s experimental cohorts to optimize resources based on economic projections of various design configurations in scaling from lab to production scale. -
Senior Research AssociateGlobal Efficiency Intelligence Apr 2022 - PresentUnited States•Co-authored reports requiring extensive research, modeling, and projections of various technological pathways to decarbonize industrial sectors including the application of hydrogen for high temperature heating and electric heating technologies.• Lead an assessment and wrote a report covering five green steel standards, eleven initiatives, and national policies of the world’s largest steel production nations to harmonize global attempts to decarbonize steel production.• Co-authored reports addressing decarbonization of PVC production in the U.S. and global production of adipic acid. -
Energy ModelerInternational Energy Agency (Iea) Nov 2023 - May 2024Paris, Île-De-France, France•Developed a global model of mechanical/chemical plastic recycling and plastic production quantifying and projecting materials flows, energy requirements, reduction in oil demand, and emissions from a current policy and net-zero context.•Supported improvements of the IEA’s Global Climate Model for the chemical, cement, and steel sectors.•Drafted industry relevant commentary and figures effectively communicating model results portrayed in the IEA’s flagship World Energy Outlook. -
System Dynamics And Modeling Group InternIdaho National Laboratory Aug 2022 - Sep 2023Idaho Falls, Idaho, United StatesU.S. Department of Energy (DOE) Critical Materials Strategy• Developed estimates of current and projected future global and U.S. supply and demand for tellurium utilized in thin film solar photovoltaic technologies and germanium in fiber optics, infrared optics, and microchips to quantitatively assess the materials’ criticality for energy technologies.• Required a detailed understanding of the materials’ current and potential future material intensity in various technologies, competing demands for application of the material, and the International Energy Agency (IEA) and DOE energy projection scenarios.U.S. DOE Critical Materials Institute• Developed process flow diagrams and mass balances for rare earth metal production from China’s Bayon Obo facility, the U.S. Mountain Pass facility, and Southern China’s Ion Absorption Clays from mining through purification. -
Colorado Science & Engineering Policy FellowColorado Science And Engineering Policy Fellowship Jun 2022 - Aug 2022Denver, Colorado, United States• Researched potential biodiesel/renewable diesel policy options for the medium and heavy-duty transport sectors and proposed an innovative policy mechanism to incentive increased blending and production of biofuels in Colorado that would decrease criteria pollutants by 30% and save the state $30 million annually in social costs. • Analyzed the emissions from Colorado’s pre 2000 heavy duty trucks and proposed a “Cash for Clunkers” program that would reduce the CO2 emissions in Colorado by 440 million tons through the life of the program.• Conducted emissions reduction potential analysis of each option using Argonne National Lab’s GREET model combined with projections of Colorado diesel vehicle fleet including projected state electrification adoption scenarios.• Engaged with stakeholders to ensure equitable and effective implementation of the proposed policy. -
Process Safety EngineerExxonmobil Jan 2019 - Jun 2021Houston, Texas• Supported four Guyana Venture FPSO Projects simultaneously across all project scopes; topsides, marine, SURF and installation on Risk, Loss Prevention and Process Safety. Steward Higher Consequence Risk and Scenario Management and Residual Risk Handover and Interface with Guyana Operations• Facilitated Risk Assessments, HAZIDS, and HAZOPS and responsible for conducting pre-work, ensuring venture alignment on 2,000+ risk items with corporate risk management processes and communicating with project team members, contractors and management. Develop final reports on 40+ risk assessments and prepare detailed assessment reports; hazard, loss of containment, jet fire, explosion analyses and recommend mitigation measures• Coordinated development of Isometrix Risk Management software tool for all venture projects and trained 150 staff on use of software and general Risk and Loss Prevention/Process Safety, increasing efficiency by 30%• Train new hire personnel and corporate low cost centers domestically and internationally, increasing cost efficiencies up to 90% -
Environmental Advisor/Inspector/EngineerSempra Lng Sep 2016 - Jan 2019Houston, Texas Area• Managed, coordinated, and assisted in FERC regulated pipeline and LNG facility activities under Section 3 and Section 7 from the initial project development phase, to; application, permitting, construction, commissioning, post commissioning inspections and compliance• Developed specific knowledge pertaining to CFR 193 Subpart b, NFPA 59a, and managed hazard analyses for the Cameron LNG and Port Arthur LNG projects• Managed 8 field survey contractors and oversaw field survey efforts to ensure safety, accuracy and cost efficiency. Trained 500+ construction crew members to promote a high standard of safety and compliance throughout project construction• Prepared extensive content for FERC application Resource Reports and supported efforts with internal team members to ensure high quality submissions, thus promoting timely approvals -
Field Engineer/Environmental InspectorSempra U.S. Gas & Power Jun 2015 - Sep 2016Lake Charles, Louisiana Area• Responsible for maintaining and exceeding national, state, and local environmental compliance as well as being a support in engineering and design of; gas transmission pipelines, meter stations, compressor stations, and gas storage facility projects• Managed and coordinated all company employees and contractor's construction activity and permitting and compliance for a gas storage facility project. Reviewed subcontractors air emissions permit applications prior to sending to the EPA to ensure accurate reporting -
Operations Engineering InternBayswater Jun 2014 - Aug 2014Denver, Colorado• Conducted a preliminary design of a well's production facility in Sweetwater County, WY on Bureau of Land Management (BLM) land. Analyzed reservoir characteristics in F.A.S.T. WellTest based on well flowback data to generate production curves. Based on the curves, used wellpad design parameters to size production equipment and establish preliminary designs for a 1 mile long, 500 ft. elevation drop pipeline connection. Managed and wrote applications for right-of-way (ROW) permitting for BLM land use• Managed and collaborated with contractors to finalize APD and ROW permits, drilling programs and site plats. Assisted with regulations, permitting, geology, wellpad surveying, drilling and well completion practices in the Niobrara -
Surface Engineering InternBhp Billiton May 2013 - Aug 2013Shreveport, Louisiana Area• Developed twelve Piping and Instrumentation Diagrams (P&IDs) for BHP Billiton’s 360 Haynesville Shale wellsites, owned and operated near Shreveport, LA. Visited all wellsites and documented their infrastructure• Designed and implemented a system capturing wellsite specific information and linked the respective P&IDs -
Surface Engineering InternBhp May 2012 - Aug 2012Houston, Tx• Studied and analyzed multiple Eagle Ford petroleum gathering facilities to mitigate and reduce unscheduled facility downtime and remedied flow regime issues to reduce existing facility shutdowns and offered solutions to enhance reliability• Recommended a standard inlet separator sizing methodology and created an Excel-based tool, enabling broader application by other Process/Facilities Engineers, ultimately minimizing the potential for slug-related shutdowns -
InternImerys May 2011 - Aug 2011Jasper, Georgia• Designed a full bill of materials and preventive maintenance program for a Calcium Carbonate mining and processing facility to automatically generate work orders on a time basis for 2,000+ assets• Inventoried all onsite spares, created a spare parts list for all assets and linked equipment to their individual spare parts to ensure cost and margin control
Adam Sibal Skills
Adam Sibal Education Details
-
Civil And Environmental Engineering -
Engineering And Technology Management -
Chemical Engineering
Frequently Asked Questions about Adam Sibal
What company does Adam Sibal work for?
Adam Sibal works for Decarbind
What is Adam Sibal's role at the current company?
Adam Sibal's current role is Founder and Principal Consultant Decarbind | Industrial Decarbonization Research and Strategy.
What is Adam Sibal's email address?
Adam Sibal's email address is ad****@****bil.com
What schools did Adam Sibal attend?
Adam Sibal attended University Of Illinois Urbana-Champaign, Colorado School Of Mines, Colorado School Of Mines.
What skills is Adam Sibal known for?
Adam Sibal has skills like Engineering, Microsoft Office, Gas, Instrumentation, Preventive Maintenance, Piping, Petroleum, Solidworks, Completion, Oil And Gas, Powerpoint, Energy.
Not the Adam Sibal you were looking for?
-
-
Adam Šibal
Cheb
Free Chrome Extension
Find emails, phones & company data instantly
Aero Online
Your AI prospecting assistant
Select data to include:
0 records × $0.02 per record
Download 750 million emails and 100 million phone numbers
Access emails and phone numbers of over 750 million business users. Instantly download verified profiles using 20+ filters, including location, job title, company, function, and industry.
Start your free trial