I am assigned as Instrument and Control Engineer for Kendari phase 3, 2x50 MW Pulverized Coal Fired Power Plant Project, located in Kendari city, of Southeast Sulawesi province, Indonesia.My main responsibility as I&C Engineer is to ensure that contractor, and their subcontractor and vendor are in compliance with project requirements, in doing design engineering, fabrication, factory testing, construction, installation, site testing, and commissioning of all field instrumentation, and control system, including telecom system. I also have to ensure that each I&C activity is performed as per schedule, while still maintaining the safety and quality.

I was fully in charge for preparing budget and schedule of instrument design engineering, procurement, construction, and commissioning by close coordination with other departments. I also involved in preparing instrument and control system philosophy, narrative, specification and datasheet, also responsible as checker for design drawing and interdisciplinary documents. I was also in charge of all interface activities, responsible for participating in any relevant meeting, and supporting management where required.Here, I was involved in 3 projects, they are:1. Sengkang LNG Production Plant and Export Terminal in Keera district, Wajo residence, South Sulawesi, Indonesia. When running, it will be the first modular LNG facilities in Indonesia (provide detailed engineering design deliverables).The plant consists of 4 liquefaction trains with 0.5 MTPA capacity each (with each has its own mixed refrigerant compressor), 2 gas pretreatment system (water and acid removal), 1 LNG tank with 2 transfer pump and 1 recirculation pump, BOG compressor, loading arm system, and utility system (like air compressor, water treatment plant, waste management system, gas flaring system, 150kV incoming switchyard, etc.).2. Pagbilao LNG Hub Terminal and Power Station in Pagbilao, the Philippines (provide instrument engineering technical assistances).The plant consists of LNG regasification plant (includes loading arms, LNG tank, BOG compressor, LNG LP and HP pumps, LNG regasification system, gas metering, etc.) and power plant (150 MW rated gas turbine generator, and auxiliary system). 3. Booster Compressor Provision for Kampung Baru central processing plant (CPP), owned by Energy Equity Epic Sengkang (EEES) Ltd. located in Sengkang district, Wajo residence, South Sulawesi (provide detailed engineering design deliverables).

I was assigned as Instrument & Electrical Project Engineer for Bekapai 2B Development project, the last big scale brownfield project of TEPI in Mahakam Block, East Kalimantan, Indonesia. For me, this project was very challenging because it has to be done on the oldest platforms of TEPI in Mahakam Block (more than 30 years old platforms) in the simultaneous operation with production. The tie-in and integration of new technology to the existing old electrical, instrumentation and control system have to be done seamlessly with avoiding any shutdown as much as possible.The project scope includes the extension of 5 offshore platforms (4 wellheads, 1 CPP) and the provision of 12 km gas pipeline to accommodate the gas and condensate flow from 8 additional wellheads. It includes the upgrading on instrumentation, control, and electrical system. My position as Instrument and Electrical project engineer played a vital role in assisting Project Manager to ensure technical interfaces among project, procurement, operation, commissioning, start-up, contractor and vendor are controlled and synchronized.I was also responsible to resolve all technical and interface problems at site and bring to the higher meeting for the resolution if necessary. On daily basis, I was responsible for the evaluation of engineering, procurement, construction, installation and approval of deliverables from the contractor. It included technical queries evaluation and approval and avoiding cost impact whenever possible.

In Technip, I was involved in 5 projects, and 1 proposal, they are:• Dec/2013 – Feb/2014Client : Total EP IndonesieProject : Bekapai Phase 2B Detail and Basic Engineering, Indonesia (FEED)• Jun/2013 – Aug/2013Client : Pertamina Hulu Energi (PHE) West Madura Offshore (WMO), IndonesiaProject : FEED for PHE-7, PHE-12 and PHE-24, FEED for PHE-44 and PHE-48, andFEED for PHE CPP Extension, Indonesia• May/2013Client : ENI Muara Bakau BV, IndonesiaProject : Design Contest for ENI Jangkrik-1 Floating Production Unit (Proposal)• Apr/2012 - Apr/2013Client : Total EP IndonesieProject : Well Connection Engineering Services 2012/2013 (DED)My responsibilities are as follow:- Perform technical tasks assigned by project/discipline head on feasibility, conceptual, basic engineering, FEED, detailed design and EPC projects and ensure the technical quality and accuracy of the work produced and the assigned tasks are completed on time.- Liaise with other departments, clients, vendors, subcontractors and third parties.- Participate in inter-disciplines, project, client, and vendor meetings when requested.- Prepare data sheets, specifications & requisition for all field Instrumentation, Control valves, Analyzers, On-off valves, Safety relief valves, PCS, ESD and FGS system and perform vendor offer review & technical bid evaluation, carryout vendor drawings/ documents review and vendor data incorporation for the above instrument.- Review/mark up instrument documents and drawings, such as datasheet, specification, Cause & Effect Matrix/Shutdown Matrix, MTO, instrument index, I/O list and assignment, panel schematic and arrangement, wiring diagram, block diagram, troubleshooting loop diagram, and layout.- Perform calculations for control valves, safety relieve valves, flow elements, restriction orifice; thermowell wake frequency and selection of the suitable valve to assist the piping discipline.

PT. Gunanusa Utama Fabricators (Gunanusa) is a very well-known Indonesian EPC company for fabrication and installation of offshore oil and gas facilities. Here I was assigned as Instrument Engineer in Production Engineering department and in charge of all instrument execution activities like provide instrument project execution plant, provide instrument ITP list, create instrument procedures (erection/installation, calibration, precommissioning, etc.), perform test and calibration, provide material purchase lists based on hookup drawing and installation detail, provide shop drawing priority list and constructability information include managing the support fabrication, prepare field instructions, execute precommissioning activities, arrange vendor mob-demob including vendor supervision, provide progress report, provide list for offshore carryover works, arrange offshore activities, manage punch lists closing, etc.In Gunanusa, I was involved in two projects, they are Mumbai High South Redevelopment ICPR-Process Platform Phase2 (owned by ONGC-India, 2009-2011) and Great Bongkot South Development Phase4A - (owned by PTTEP-Thailand, 2011-2012).

I started my professional career in January 2008 as Controls Specialist in SpiraxSarco Indonesia, a leading company in steam system design and products. I was responsible of assisting all sales engineer for control and instrumentation products and packages selling execution throughout Indonesia, from proposal, bidding, testing, installation, up to commissioning, and training.