Albert Lim Email & Phone Number

Kuantan, Pahang, Malaysia

1. Utility consumption - Study and Propose long term plans/projects to optimize utility consumption - Study and Propose long term cost improvement projects for utility consumption- Optimise Nitrogen Generation Plant @350nm3/hr capacity @8.5bar2. Effluent Water Recovery - RO Water Treatment Plant- Effluent Water Recovery @100m3/hr- RO Reject Water Recovery3. Energy Management- Digitalisation efforts for energy and utilities management using Power BI - Optimisation of process control for energy usage improvement4. Utility Chemical Consumption- Improved the COC for Cooling Tower from 2 to between 4 - 65. Burner NG optimisation study- Combustion air Pre-heater

Malaysia

1.Write the Process Basis of Design for the new Lynas Kalgoorlie Rare Earth Processing Facility. 2. Run Mass and Energy Balance Calculation for Lynas Kalgoorlie Rare Earth Processing Facility using METSIM and Excel3. Process Design (FEED) for Lynas Kalgoorlie Rare Earth Processing Facility4. Worked on PFD and P&ID for Lynas Kalgoorlie Rare Earth Processing Facility5. Run Lab Simulation and related metallurgy testwork for Lynas Kalgoorlie Rare Earth Processing Facility6.Write Engineering Specifications for the Recycled Water Treatment Plant and Disinfected Water Treatment Plant for the Lynas Kalgoorlie Rare Earth ProcessingFacility. 7. Package/ProjectEngineer for Recycled Water Treatment Plant for Lynas Kalgoorlie Rare Earth Processing Facility 8. Package/ProjectEngineer for Disinfected Water Treatment Plant for Lynas Kalgoorlie Rare Earth Processing Facility 9.Package/Project Engineer for Clarification Plant for Lynas Kalgoorlie Rare Earth Processing Facility

Puchong

Part time tutor for English, Science and Math subjects.

Petaling Jaya, Selangor, Malaysia

1) Successful completion of in-house Mass and Energy Balance for RTP Plant, Pre-Treatment Plant and De-Ashing Plant. 2) Successful completion of the calculation for heat requirement for RTP plant, Pre-Treatment Plant and De-Ashing Plant. 3) Successful completion of the Life Cycle Analysis for RTP Plant, Pre-Treatment Plant and De-Ashing 4) Successful completion of water and utility requirement for RTP, Pre-Treatment Plant and De-Ashing Plant5) Design process and control systems for De-Ashing Plant based on data collected in pilot plant operations.6) Technology patent holder/inventor for Premium Renewable Energy's De-ashing Pilot Plant.

Petaling Jaya, Selangor, Malaysia

1) Work with Ensyn (technology partner) on Biomass Rapid Thermal Processing (RTP) 2) FEED for Biomass Deashing Plant3) FEED for Biomass Pre-treatment Plant4) Technical and Financial Due Diligence5) Biomass to Bio Oil Project Management

Kuantan, Pahang, Malaysia

PROCESS ENGINEER (Cracking & Leaching) March 2013 to October 2013Develops, optimizes and improves Rare Earth cracking and leaching process. Duties:Cracking:1. Monitoring and improvement of acid/lanthanide concentrate mixing.2. Monitoring and improvement of rotary kiln operation.Leaching: 1. Monitoring and improvement of pressure filter operation.2. Monitoring and improvement of RE leaching performance. PROCESS ENGINEER (Offsite, Utilities & Residue) October 2013 to March 2014Optimizes and improves wastewater treatment and tank farm and utilities operation. Duties:1. Monitoring and improvement of physical separation of wastewater using sludge thickener and pressure filter. 2. Monitoring and improvement of biological treatment of wastewater. 3. Monitoring and improvement of tank farm operation.4. Monitoring and improvement of boilers, compressors and cooling tower operation.PROCESS ENGINEER (Cracking & Leaching - Rotary Kiln & WGT) March 2014 to November 2014Optimizes and improves the operation of rare earth cracking and waste gas treatment. Duties: 1. Monitoring and improvement of acid/lanthanide concentrate mixing.2. Monitoring and improvement of rotary kiln operation.3. Monitoring and improvement of waste gas treatment operation.

Kuantan, Pahang, Malaysia

PROJECT ENGINEER Coordinates technical activities on linepipe and bend coating activities. Plans, schedules, conducts, and coordinates linepipe and bend coating works, monitors work for compliance to applicable codes, accepted engineering practices, and Client's standards or specifications. Ensures effective communication and coordination on assigned projects between all disciplines and all other project participants. Responsible and accountable to ensure that all assigned personnel are coordinating their activities with other project participants and that the requirements of the Contract are being satisfied.Duties:1. Preparation of project schedules and forecasts.2. Coordination and checking of linepipe and bend deliverables.3. Preparation of daily, weekly and monthly project status reports for internal and client's review.4. Monitoring of material usage trend on a daily, weekly and monthly basis.5. Coordination of change of orders from clients.6. Extensive regular contact with Clients and Client's representatives on site.7. Participating in Client/contractor meetings and resolving Client/engineering and project management issues.a) Pertamina Hulu Energi West Madura Offshore (Completed, 2012).• 16” offshore Pipeline from KE-38P Subsea Manifold to PP Platform Project. • Fusion Bonded Epoxy Coating 16”Bends. b) PETRONAS Research Sdn. Bhd. (Completed, 2012)• REMCoat Shawcor and PRSB QualificationTrial.• 3LPP and 3LPE coating on 16” CS linepipes. c) Ichthys Inpex GEP (Ongoing, 2012)• Internal Flow Coating on 42” linepipes• AE and 3LPP coating on 42” linepipes• Concrete Weight Coating on AE and 3LPP coating on 42” linepipes. Mitsui & Co. Ltd.

Gelang Patah, Johor, Malaysia

• Preparation of monthly yield and reject reports and submitted and presented to Engineering Manager.• Troubleshooting of defective EVA sheets to meet customer's specifications and standards.• Preparation and establishment of SOP for current and new EVA extrusion processes.• Establishment of optimum parameters for mass production through Minitab 15 for new product trials.• Ensuring quality of EVA sheets is met for every EVA sheet project delivered to customer by monitoring daily critical process parameters.Improvement Projects• Pre-treatment on EVA pellets. To minimize and set up an acceptable amount of moisture content in EVA pellets. Moisture content leads to blister and bubbles (cosmetic defects) on EVA sheet.• Process capability of a new production line for “Paperless EVA” (with Engineering Manager, Maintenance & Production). To eliminate the use of a silicone-based back sheet paper.

Pasir Gudang, Johor, Malaysia

• Monitoring and improvement of Plating-Deposited Inclusion and Circular Pits (Microdefects).• Preparation of technical report and presented in weekly yield meeting.• Establishment of front-end defects troubleshooting reaction guide and control system.• Coordination of the disposition of defective NPP disks by running statistical analysis.• Improvement of Microdefects occurrence through the implementation of lean manufacturing practices.• Establishment of SOP for current and new EN plating processes.Improvement Projects• Switching of filters from 0.2micron to 0.1micron. To minimize the occurrence of Plating-Deposited Inclusion (nodules) defect onNP disks.• Development of a comprehensive methodology in replacing filters.

Kuantan, Malaysia

• Conduct research on thermosetting formaldehyde-based resins.• QC of outgoing thermosetting resins and incoming raw materials.• Attend to customers’ complaints, mill trials and customer courtesy visits.Research & Development Projects • Phenolic Formaldehyde Adhesive for quake-resistant Kenaf Fiberboard.• Urea Formaldehyde Adhesive for Chipboard /Particleboard. Development of E1 & E0 adhesives.• Melamine Urea Formaldehyde Adhesive for Veneer and Plywood. Development of E1 & E0 adhesives.• Phenolic Formaldehyde Adhesive for Plywood. Development of cost-efficient PF adhesive with longer hardeningtime after addition of filler (flour and calcium carbonate). Development of new filler for PF adhesive.

Bachelor Of Engineering (Beng), Chemical Engineering

Activities and Societies: English Debate Team, Orchestra Group (Trumpet), Chemical Engineering Society (Logistics)

Malaysian Certificate Of Higher Education, Pure Science, 1A 3B'S

Malaysian Certificate Of Education, Pure Science, 6A1'S & 3A2'S

Activities and Societies: 1. Brassband & Orchestra 2. English Debate