Albert Warren Email & Phone Number

Electrical Closure Field Engineer (CFE) 08/11/2021- 10/07/2022 (SOUTHERN) at PLANT Vogtle UNITS 3 &4 Waynesboro, GA. Provided Field Engineering/Oversight support associated with Containment Building. Ensured closure of numerous Work Packages through collaboration with various resources including but not limited to QA/QC, Planning support team, Westinghouse engineering, Supply Procurement team, Electrical superintendents, Craft.Bechtel• Ensured through proper planning and teamwork that the various groups of the Team were Safe and set-up for success. Including but not limited to All Safe Work Methods/Best Work Practices were complied with meeting or exceeding Stations expectations and all craft are fully engaged working safely/Observed Safety Postings to ensure zero injuries/damage to plant equipment and targeting zero human performance events.• Ensuring Work Scope was identified. All Procedures were being complied with, Work packages had the latest Procedure/Drawing Revisions/OE and Clearance Orders/Tagging were adequate.• Ensuring that Configuration Control was maintained using LOTO/Procedures/Authorizing Documents and Human Performance Tools. • FME ZONES Identified: Ensuring ALL were following FME Procedures to meet Stations expectations.• Ensuring all Materials/Tools/Test equipment were procured and available.• Performing various offline projects as needed.• Monitored and reported schedule adherence to Plant and Senior Management.

Houston, Texas, Us

AMD Project (Analog Multi Drop/SCADA) for Substation's throughout the state of Michigan. • Ensured Work Scope was identified. Work Orders had the latest IFC Drawing Revisions/BOM was accurate and ensured all programable material/long lead items procured and readily available in a timely manner. Streamline procurement process between vendors/contractors, the owner (Consumers Energy). • Ensured All Resources were available, Outages identified/Scheduled (STA PWR/CAP BANK/XFMR/ETC.), Clearance’s taken and coordinated with the following groups including but not limited to: (Miss Dig/OPPS/SCADA-DSCADA/Contractors/various customers/EFL/I&C/Telco providers) and provided a 12-Week Schedule Look Ahead.• Ensured thru proper planning and team work that the various groups of the Team were Safe and set-up for success.• Performed various on/offline projects.• Provided Oversight for Acceptance Testing.• Monitored and reported schedule adherence to Senior Management.

PROVIDE OVERSIGHT/SUPERVISION OVER THE FOLLOWING: U-2 TURBINE/GENERATOR SHAFT GROUNDING CONTINOUS MONITORING SYSTEM MOD./2B REACTOR FEED WATER PUMP MOTOR REPLACEMENT/2A CIRCULATING PUMP REPLACEMENT. Provided Oversight for Acceptance Testing, including but not limited to: DCS Systems D2R25 REFUELING OUTAGE.

Philadelphia, Pa, Us

• Performed and Provided Oversight for Acceptance Testing.

Houston, Texas, Us

(EXELON) at Clinton Nuclear Generating Station, Clinton, IL. Provided Oversight for: Rat B Open Phase XFMR MODS/Potential Loss Monitoring System/ISOPHASE BUS DUCT STANDBY COOLING AUTO-START ModsC1R17 Refueling Outage. CBI• Ensured all Safe Work Methods/Best Work Practices were complied with meeting or exceeding Stations expectations and all craft were fully engaged working safely/Observed Safety Postings to ensure zero injuries/damage to plant equipment and Targeting zero human performance events.• Ensured Work Scope was identified, All Procedures were being complied with, Work Orders had the latest Procedure/Drawing Revisions/OE and Clearance Orders/Tagging were adequate.• Provided Oversight for Acceptance Testing, including but not limited to: DCS Systems.• Ensured that Configuration Control was maintained using LOTO/Procedures/Authorizing Documents and Human Performance Tools.• Performed various on/offline projects.• Monitored and reported schedule adherence to Plant and Senior Management.

Houston, Texas, Us

(Entergy) at Pilgrim Nuclear Generating Station, Plymouth, MA. RFO-21 Refueling Outage. CBIOVERSITE OF 480v MOLDED CASE CIRCUIT BREAKER PMT'S.• Ensured all Safe Work Methods/Best Work Practices were complied with meeting or exceeding Stations expectations and all craft were fully engaged working safely/Observed Safety Postings to ensure zero injuries/damage to plant equipment and Targeting zero human performance events.• Ensured Work Scope was identified. all Procedures were being complied with, Work Orders had the latest Procedure/Drawing Revisions/OE and Clearance Orders/Tagging were adequate. • Performed and Provided Oversight for Acceptance Testing, including but not limited to: DCS Systems• Ensured that Configuration Control was maintained using eSOMS/LOTO/Procedures/Authorizing Documents and Human Performance Tools.• Held eSOMS Tag-out Holder’s Rights.• Monitored and reported schedule adherence to Plant and Senior Management.

Houston, Texas, Us

(EXELON) at LaSalle County Nuclear Generating Station, Marseilles, IL. Klockner-Moeller Breaker Mods Project/L2R16 Refueling Outage. CBI•• Ensured all Safe Work Methods/Best Work Practices were complied with meeting or exceeding Stations expectations and all craft were fully engaged working safely/Observed Safety Postings to ensure zero injuries/damage to plant equipment and Targeting zero human performance events.• Ensured Work Scope was identified. All Procedures were being complied with, Work Orders had the latest Procedure/Drawing Revisions/OE and Clearance Orders/Tagging were adequate. • Provided Oversight for Acceptance Testing, including but not limited to: DCS Systems.• Provided Oversight for Acceptance Testing, including but not limited to: DCS Systems.• Ensured that Configuration Control was maintained using LOTO/Procedures/Authorizing Documents and Human Performance Tools.• Performed various on-line projects.• Monitored and reported schedule adherence to Plant and Senior Management.

• Assisted Engineers with Testing and Commissioning Requirements for cabling/grounding, Back Feed, HV/MV/LV Electrical Distribution systems and panels, DCS Systems, Transformers, Heaters, Automatic Transfer Switches (ATS), Generators, UPS Systems, 125VDC (batteries and charging systems), overcurrent protection devices, Metering and Relaying, Power Monitoring Systems, Motors (fans, pumps), Instrument Air, HVAC, CT, WT, LUBE OIL FLUSHES and other related Electrical Systems/controls and devices in accordance with all Safe Work Methods/Best Work Practices. • Performed and Provided Oversight for Acceptance Testing.• Built Work Packages overseeing work package closure documentation, created excel spread sheets, provided documents related to Commissioning of the various Electrical systems.• Ensured that Configuration Control was maintained using LOTO/Procedures/Authorizing Documents and Human Performance Tools.

Houston, Texas, Us

• Scheduling, JIT, Installation, Testing, and Coordinating meetings with interfacing work groups in accordance with Safe Work Methods and Best Work Practices with zero injuries/events/human performance issues. Performed walk downs and met with craft personnel. Monitored and reported schedule adherence to Plant and Senior Management. • Ensured Work Scope was identified. All Procedures were being complied with, Work Orders had the latest Procedure/Drawing Revisions/OE and Clearance Orders/Tagging were adequate. • Performed and Provided Oversight for Acceptance Testing, including but not limited to: DCS Systems• Obtained Task Manager Qualifications.

Houston, Texas, Us

• Scheduling, Installation, Testing, and Coordinating meetings with interfacing work groups in accordance with Safe Work Methods and Best Work Practices with zero injuries/events/human performance issues. Performed walk downs and met with craft personnel. Monitored and reported schedule adherence to Plant and Senior Management.• Ensured Work Scope was identified. All Procedures were being complied with, Work Orders had the latest Procedure/Drawing Revisions/OE and Clearance Orders/Tagging were adequate. •Provided Oversight for Acceptance Testing, including but not limited to: DCS Systems.• Obtained Task Manager Qualifications.

Corpus Christi, Tx, Us

•• Reviewed Instrumentation Documents/verification of installed components/documented deficiencies. Data entry utilizing Excel/beamex CMX Calibration Management Software. • Ensured Work Scope was identified. All Procedures were being complied with, Work Orders had the latest Procedure/Drawing Revisions/OE and Clearance Orders/Tagging were adequate. • Shoot loops/Calibrate/Troubleshoot various systems-components: VFD’S, MOV’S, RTD’S, Mixer Scales, Turbo-Fans, Eyewash-Shower Stations, Ultrasonic Level Transmitters and various Hart Protocol transmitters. • Provided Oversight for Acceptance Testing, including but not limited to: DCS Systems.• Ensured that Configuration Control was maintained using LOTO/Procedures/Authorizing Documents and Human Performance Tools.

Atlanta, Georgia, Us

• • Ensured all Safe Work Methods/Best Work Practices utilized and Observance of Established Postings in the RCA are complied with and all craft were working safely to ensure zero injuries and zero human performance events. Ensured Work Scope was identified. all Procedures were being complied with, Work Orders had the latest Procedure/Drawing Revisions/OE and Clearance Orders/Tagging were adequate. • Oversaw-coordinate lay-out Infrastructure of Supplemental Supervisors Trailer (21-WPS) (work stations); ensured phone/data/hardware procured/functioning ready for use.• Performed various on-line projects.

• Identified Work Scope/Manpower Requirements/Responsible for staffing project with the help of the various Trade Unions for Day and Night shifts. Supervise First Line Supervisors.• Ensured all Safe Work Methods/Radiological/Best Work Practices were complied with meeting or exceeding Stations expectations. Conducted JIT/Pre-Job Briefs/Ensured 2-Minute Drill was held at the work area/Identified proper Train/Component(s) before any actions were taken. All Craft were fully engaged working in accordance with Safe Work Methods/Procedure use and Adherence with Best Work Practices/Observing Safety Postings and Ensuring Zero injuries/damage to plant equipment and Targeting Zero Human Performance events. •Provided Oversight for Acceptance Testing, including but not limited to: DCS Systems.•Ensured Work Orders had the latest Procedure/Drawing Revisions/OE and Clearance Orders/Tagging were adequate.