Ali Shah Email and Phone Number

-Prepare project charters, scope of work documents, Business Case Summaries for Senior Management, the Executive Office and the Board of Directors, for project approval and the release of funds. -Prepare and coordinate estimates, schedules, execution plans, contracting strategies and project oversight plans.-Arrange for application to, and negotiate with internal and external agencies for all necessary approvals, licenses, permits or clearances required;-Ensure proper process is… Show more -Prepare project charters, scope of work documents, Business Case Summaries for Senior Management, the Executive Office and the Board of Directors, for project approval and the release of funds. -Prepare and coordinate estimates, schedules, execution plans, contracting strategies and project oversight plans.-Arrange for application to, and negotiate with internal and external agencies for all necessary approvals, licenses, permits or clearances required;-Ensure proper process is followed when defining labour requirements and arranging for labour resources (CPPA).-Coordinate the clarification of design, specification requirements , bid packages, evaluation of tenders, and purchasing recommendations, and arrange for necessary changes;-Arrange and lead meetings to coordinate the requirements of, and progress by designers, suppliers, construction and operations before and after contract award. Maintain close liaison with field construction forces and operations on matters involving design, schedules, costing, and other related issues.- Maintain communication with internal and external stakeholders, regulatory bodies and agencies, and cooperate in exchange of relevant information as required to meet the project objectives-Visit various site locations, manufacturers, and suppliers as required. Be prepared to witness factory acceptance testing at vendor sites for purchased material/ equipment.-Maintain awareness of, and keep all project parties informed of latest construction, budgeting, estimating and scheduling practices and other corporate procedures. Review and maintain awareness of all corporate and local procedures pertinent to project control and administration. Maintain process compliance during project execution and advise supervisor if compliance cannot be achieved. Show less

As part of Nuclear Division, I report to Division/Site Manager, and responsible for managing the Engineering, Procurement, and Construction (EPC) projects. Key activities are listed below:- Review and Approve Design for Construction via EC process- Review and Approve procurement activities – Material is procured via approved vendors (AVL/ASL)- Manage QC/QS activities– Ensure all Witness/Hold points have been satisfied- Manage QA activities- Ensure project is executed in the… Show more As part of Nuclear Division, I report to Division/Site Manager, and responsible for managing the Engineering, Procurement, and Construction (EPC) projects. Key activities are listed below:- Review and Approve Design for Construction via EC process- Review and Approve procurement activities – Material is procured via approved vendors (AVL/ASL)- Manage QC/QS activities– Ensure all Witness/Hold points have been satisfied- Manage QA activities- Ensure project is executed in the field in accordance with applicable procedures for nuclear, conventional, personnel and environmental safety and ensure compliance- Review and disposition technical issues during Construction – Approved Engineering or Field Changes- Manage and report CNO, Project milestones- Manage and update stakeholders on schedule and budget – Provide weekly forecast and schedule update- Manage resources and sub-contractors: transfers, performance review, training, scheduling etc. Show less

As part of the ECIC branch, I was supporting Services Division on the following projects:Shielded Work Station (SWS) for Cernavoda 2Embalse Refurbishment ProjectQinshan Dousing System Upgrade

The NRU reactor supplies industrial and medical radioisotopes, facility for neutron physics research; and to provide engineering research and development support for CANDU® power reactors.As part of the Configuration Management team, my responsibilities were but not limited to:- Interfaced with design participants, operations engineers, technical staff and nuclear operators; obtain technical input, as required, to meet Project and Client requirements- Reviewed and prepare… Show more The NRU reactor supplies industrial and medical radioisotopes, facility for neutron physics research; and to provide engineering research and development support for CANDU® power reactors.As part of the Configuration Management team, my responsibilities were but not limited to:- Interfaced with design participants, operations engineers, technical staff and nuclear operators; obtain technical input, as required, to meet Project and Client requirements- Reviewed and prepare Design documents for NRU Safety Systems to reflect the status of the as –built as part of commitment to Canadian Nuclear Safety Commission (CNSC)- Lead a multidisciplinary team to perform field walk-downs to develop work packages- Provided weekly updates on Schedule and Budget- Provided feedback to Design, Operations, System Health, and Safety & Licensing groups- Act as single point of contact between operations and engineering- Raised Impacts and Engineering Change’s as required Show less

AECL's scope of the project was expected to complete the removal and replacement of fuel channel components in Unit 1 & Unit 2 reactors, along with the associated hardware.My responsibilities were but not limited to:- Provided technical oversight for fuel channel components (CT and PT trimming, EF Installation, etc.) fabrication at Bruce site. SPOC for all Tooling Issues.- Reviewed and approved procedures/work instructions, maintenance manuals for Tooling- Reviewed… Show more AECL's scope of the project was expected to complete the removal and replacement of fuel channel components in Unit 1 & Unit 2 reactors, along with the associated hardware.My responsibilities were but not limited to:- Provided technical oversight for fuel channel components (CT and PT trimming, EF Installation, etc.) fabrication at Bruce site. SPOC for all Tooling Issues.- Reviewed and approved procedures/work instructions, maintenance manuals for Tooling- Reviewed documentation to assist in the procurement of Tooling spare parts- Prepared and reviewed DCIs and Work Orders to implement design changes (tooling and FC components)- Applied PMP techniques to manage the Scope, Time, Cost, Risk and Quality of the product- Supervise Quality Control (QC) group to assure Quality Assurance (QA) Program is being followed per regulator manuals and guidelines- Provided a daily log on T-0 schedule, technical issues and resolutions or path forward- Co-ordinate with foreman’s, trades and multidisciplinary groups to ensure items or services needed to execute a given job are ready and per schedule- Attended shift turn-over and production meetings to assist and solve any issues to support field activities – Installation of CT and Fuel Channels in Reactor- Managed trades to troubleshoot the tools and supervise the training at site- Acted as single point of contact between TSSA, PMC and AECL to resolve Tooling and Design Issues Show less

As a Design Engineer, I was assigned to satisfy CNSC requirements for Safety Systems:- Prepared and reviewed design documentation such as drawings, design requirements, design manuals, bill of materials, etc.- Prepared and reviewed documentation to assist in the procurement of equipment.- Worked with client and design teams in gathering requirements and finalizing project scope.- Prepared and reviewed information packages to support construction, installation, procurement… Show more As a Design Engineer, I was assigned to satisfy CNSC requirements for Safety Systems:- Prepared and reviewed design documentation such as drawings, design requirements, design manuals, bill of materials, etc.- Prepared and reviewed documentation to assist in the procurement of equipment.- Worked with client and design teams in gathering requirements and finalizing project scope.- Prepared and reviewed information packages to support construction, installation, procurement, commissioning, and operation activities- Prepared and reviewed Field Changes in order to keep the construction contractor engaged in construction activities.- Prepared and issued Project Instruction Memos to be used by Construction Contractors in the Build Phase of the Project.- Prepared “as-built” of installed versions of design. This involves updating specifications in the post-build phase to reflect actual construction/build elements.- Satisfied all QA requirements for performing the work including but not limited to review and comment, archiving, etc. Show less

As a Technical Engineer at Wardrop, I worked on Ontario Power Generation Darlington Environment Qualification (EQ) project to identify the critical equipments/components in a system, which will be required to maintain their functionality when exposed to harsh environment following an accident.- Developed EQ packages for various components (cables, valves, motors, pumps, ACU etc).- Reviewed Design, Maintenance and Operating documentation (DM, DR, TS, OTP, MM etc) of systems (EFADS… Show more As a Technical Engineer at Wardrop, I worked on Ontario Power Generation Darlington Environment Qualification (EQ) project to identify the critical equipments/components in a system, which will be required to maintain their functionality when exposed to harsh environment following an accident.- Developed EQ packages for various components (cables, valves, motors, pumps, ACU etc).- Reviewed Design, Maintenance and Operating documentation (DM, DR, TS, OTP, MM etc) of systems (EFADS, PHTS, LICS etc) from EQ perspective.- Review drawings/documents to create block diagrams representing electrical/mechanical components of the given system.- Analyzed each nuclear component under EQ guidelines.- Prepared and reviewed EQLDP (EQ List Design Packages) using the above analysis.- Ensured QA procedures were followed per customer and regulatory (CNSC) requirements. Show less

- Worked on Darlington Universal Delivery Machine (UDM) and Pickering UDM Projects.- Active involvement with design, performance engineering, operations and stakeholders to ensure timely and accurate delivery of design documents.- Worked on Bruce Spacer Location and Relocation (SLAR) Design Project.- Responsible for all the design documentation and Free issued items.- Updated weekly progress of all members including vendors using MS Project and Excel.- Modified drawings… Show more - Worked on Darlington Universal Delivery Machine (UDM) and Pickering UDM Projects.- Active involvement with design, performance engineering, operations and stakeholders to ensure timely and accurate delivery of design documents.- Worked on Bruce Spacer Location and Relocation (SLAR) Design Project.- Responsible for all the design documentation and Free issued items.- Updated weekly progress of all members including vendors using MS Project and Excel.- Modified drawings, documentations and bill of materials.- Responsible for checking proposal drawings, design guidelines and design problems. Show less