Andre Luiz Mayer Email & Phone Number

State Of Paraná, Brazil

Curitiba, Paraná, Brasil

Ortigueira, Paraná, Brasil

Aruacaria, Parana - Brazil

Acted as a technician in industrial instrumentation during the maintenance stop at the refinery Getúlio Vargas (Repar) in Araucária-PR, achieved significant achievements. Performed accurate calibrations on pressure, temperature, level and control valves measuring instruments, ensuring the accuracy and reliability of equipment.One of the main achievements was the safe start of the units' instrumentation equipment after maintenance stop, without failures, ensuring the continuity of operations with efficiency and safety. These achievements highlight my technical competence and my commitment to operational excellence.

Araucária, Paraná, Brasil

Acting as an Instrumentation Technician in a maintenance contract with Petrobras, I obtained relevant achievements. My activities included the installation of equipment and corrective, predictive and preventive maintenance, which resulted in a greater availability of instruments and reduced process downtime, providing greater operational efficiency.Field calibrations in instruments of level, pressure, flow and temperature, as well as acting with analytical instrumentation. Calibration and maintenance of pressure transmitters and temperature transmitters ensured accuracy and reliability in the processes. I was also responsible for the maintenance of control valves and solenoid valves, ensuring their proper functioning and contributing to operational safety.

Ponta Grossa, Paraná, Brasil

Acting as an Instrumentation Technician in the maintenance contract with the customer Allnex, in the discipline of instrumentation and automation, I achieved minimization of equipment downtime, which resulted in a significant reduction of impacts on production. My work included preventive, predictive and corrective maintenance, ensuring the operational availability of the systems. During the shift, I was responsible for solving technical maintenance problems, performing calibrations of sensors and transmitters of pressure and temperature, ensuring the accuracy of instruments and the continuity of processes. I also worked in the maintenance of control valves and the integration of CLP (Programmable Logic Controller) in industrial automation systems.I participated in commissioning and startup of plants, analyzing control systems and applying industrial communication protocols such as Profibus, Modbus and HART. In addition, I used SCADA systems and interpreted P&ID diagrams to ensure the correct operation and maintenance of the instruments. Strictly complying with safety standards (NR 10, NR 33, NR 35), my work focused on operational safety and maintenance of level, pressure, flow rate and temperature instruments, contributing directly to the efficiency and safety of industrial processes.

Working as an Electronic Maintenance Technician, I developed skills in CLP Rockwell and gained significant experience in corrective and preventive systems maintenance. I have basic knowledge in electrical and have worked effectively in the calibration of sensors, as well as maintenance of pressure transmitters and temperature transmitters, ensuring instrument accuracy and operational continuity. During the maintenance activities on shift, I was responsible for solving technical problems, working as a team to ensure the efficiency of control systems. I also worked in the operation and configuration of industrial communication protocols such as Profibus, Modbus and HART, besides collaborating in the maintenance of control valves and supporting industrial automation activities.My experience includes the use of SAP system for planning and controlling maintenance activities, always in accordance with safety standards (NR 10, NR 33, NR 35). I am also familiar with the interpretation of P&ID diagrams, applying my knowledge in process control and control system analysis to ensure operational safety and efficiency in interventions. With this experience, I also participated in commissioning activities and support to the start-up of plants, contributing to the reliability and performance of the level, pressure, flow rate and temperature instruments. These activities reinforce my commitment to excellence in maintenance and the constant search for continuous improvement.

Ponta Grossa, Paraná, Brasil

I worked as Technician in Instrumentation and Automation, developing maintenance plans in the area of instrumentation, ensuring metrological reliability and performing predictive maintenance on various systems. I have experience in providing support and performing preventive and corrective maintenance on industrial automation equipment, as well as preparing detailed technical reports and solving technical problems in the field effectively. I have basic knowledge of Siemens S7-300 PLC, working with industrial communication protocols like Profinet and DeviceNet. I also have experience with the SAP system, using the modules PM03, PM04, PM05 and PM06 for control and planning of maintenance activities and calibration of sensors, pressure transmitters and temperature transmitters.My work included the analysis of control systems and interpretation of P&ID diagrams, ensuring efficiency in process control and proper operation of control valves and other critical instruments such as level, pressure, flow rate and temperature instruments. I participated in commissioning activities and support to the start-up of plants, contributing to the reliability of SCADA systems and continuous improvement of processes. By strictly following safety standards (NR 10, NR 33, NR 35), I have always ensured operational safety and compliance with regulatory requirements, reflecting my commitment to excellence and continuous improvement in industrial automation.

Ponta Grossa E Região, Brasil

Acted as a technician in instrumentation and automation, with comprehensive skills in the preparation of maintenance plans in the area of instrumentation and metrological reliability. One of my greatest achievements was the certification of the unit in the area of metrology, guaranteeing the reliability of the instruments in the brewing process. I have worked in the maintenance of pressure vessels and analytical instruments at the water treatment plant, resulting in significant improvement of water treatment in the manufacturing process. My experience includes support and maintenance of industrial automation equipment, ensuring the reliability of measurement and control equipment.I am skilled in the preparation of detailed technical reports and have intermediate knowledge in Excel. I participated in the commissioning of the beer manufacturing process, contributing to the resolution of complex technical problems, having as achievement the effective availability of the instruments of the factory unit, contributing to the certification of the factory by the corporate factory. I have basic knowledge in Siemens S7 300 and 400 PLC as well as in A-SI network analysis, Profinet and DeviceNet. I am committed to continue contributing to the efficiency and success of industrial operations.

Castro E Região, Brasil

Acting as an Instrumentation Technician, I achieved remarkable achievements in developing preventive and predictive maintenance plans in the areas of electrical and instrumentation, using sensor data and instruments to enter information in SAP. This approach has allowed the creation of more efficient maintenance plans, significantly improving equipment operation and availability. My work was essential in performing repairs in malfunctions, investigating the causes of failures and developing short and long-term solutions for problems related to both electrical and instrumentation.My work was essential in performing repairs in malfunctions, investigating the causes of failures and developing short and long-term solutions for problems related to both electrical and instrumentation. In addition, I played a key role in supporting and executing corrective maintenance and industrial automation, involving PLC (Programmable Logic Controller) and industrial communication protocols such as Profibus, Modbus and HART. I have prepared precise diagnoses and detailed technical reports, and closely followed the assembly and commissioning of projects in the area of instrumentation, including the Barrica project, which highlighted my ability to manage complex projects and integrate process control systems with the use of P&ID diagrams. My participation in training with manufacturers such as GEMÜ, related to the unit’s continuous sterilizer control valves, further strengthened my skills, allowing more effective and reliable maintenance of these equipment. During these processes, we strictly followed the safety standards (NR 10, NR 33, NR 35), always ensuring operational safety. In addition, I participated actively in the start-up of plants and the calibration of instruments for level, pressure, flow rate and temperature, contributing to the optimal functioning of SCADA systems. These achievements reflect my commitment to excellence and innovation in the field instrumentation.

Lapa, Paraná

Acting as a Technician in Industrial Instrumentation, I was featured in the technical analysis of products and services of measurement and control, besides managing successfully the commissioning of units. Having as main highlight the startup of the plant without failures and started production in advance of the time scheduled for the startup. I was responsible for the implementation and management of the instrumentation laboratory, coordinating the acquisition of equipment and standards, and the implementation of the ISOPLAN calibration software. Coordination of work teams and implementation of calibration procedures Preventive and corrective maintenance of units Advanced knowledge in programming frequency inverters and soft-start Basic experience in SAP, including material requisition and opening purchase notes Basic programming in Rockwell Automation PLC RSLogix5000 Configuration of frequency inverters and soft-starter.

Araucaria, Paraná

Acted as technician in instrumentation, I achieved several significant achievements. I performed detailed technical analyses and acquired products and services for measurement and control, which resulted in the successful start-up of the plant, meeting Petrobrás' expectations. In addition, I have managed the technical documentation and reliability systems with excellence, effectively coordinating work teams. My contributions include the accurate calibration of equipment and the performance of preventive and corrective maintenance on measurement and control equipment. I have actively participated in the assisted starting of several critical units, including U-2222 (Catalytic Reform Unit), U-2313 (Unstable Current Hydrotreatment Unit), U-3111 (Naphtha Fractionation Unit), U-22311 (Hydrogen Generation Unit) and U-32323 (H 2 S Removal Unit).In addition, I performed loop tests on flow, level, pressure, temperature, gas and fire detectors instruments, and on control valves of the respective units. These activities were fundamental to ensure the safe and efficient operation of the plants, highlighting as important achievements in my career.

Pinhais, Paraná

Acted as Technician in Instrumentation in commissioning and technical analysis of acquisition of products and services of measurement and control, management of technical documentation and reliability systems, calibration of equipment, Performance, evaluation and preventive and corrective maintenance of measuring instruments and control valves, both in refineries and offshore platforms. In the REPLAN-Petrobrás refinery in Paulínia-SP and in the REPAR-Petrobrás unit in Araucária-PR, I participated in the commissioning and assisted start of the compressor of the propene production unit, having as its greatest achievement the as expected by the Petrobras customer.In addition, I was involved in the commissioning and assisted start-up of the hydrogen generating unit, the acid water rectification unit and the unstable hydrotreatment unit in the modernization work of the REVAP-Petrobrás refinery in São José dos Campos-SP. My offshore experience includes commissioning of fire and gas detector instruments, control valves and loop test in mesh temperature, flow, level and pressure fieldbus technology instruments in the MONTEIRO LOBATO-LOBATO Gas Treatment unitPetrobras in Caraguatatuba-SP.I also worked on the maintenance contract in control valves and pressure and level instruments at Petrobras' P-31 platform, where I performed critical functions to ensure the safe and efficient operation of offshore production units.