Andrew Basch Email & Phone Number
@oldcastlebridgnorth.co.uk
LinkedIn matched
Who is Andrew Basch? Overview
A concise factual answer block for searchers comparing this professional profile.
Andrew Basch is listed as Field Technician at Wyoming Machinery Company, a with 261 employees, based in Moorcroft, Wyoming, United States. AeroLeads shows a work email signal at oldcastlebridgnorth.co.uk and a matched LinkedIn profile for Andrew Basch.
Andrew Basch previously worked as Field Mechanic at Steve Mcgee Construction, Llc and Technician at Crh.
Email format at Wyoming Machinery Company
This section adds company-level context without repeating Andrew Basch's masked contact details.
AeroLeads found 1 current-domain work email signal for Andrew Basch. Compare company email patterns before reaching out.
About Andrew Basch
Andrew Basch is a Field Technician at Wyoming Machinery Company. He possess expertise in maintenance and repair, electronics, electrical troubleshooting, preventive maintenance, mechanics and 16 more skills.
Listed skills include Maintenance And Repair, Electronics, Electrical Troubleshooting, Preventive Maintenance, and 17 others.
Andrew Basch's current company
Company context helps verify the profile and gives searchers a useful next step.
Andrew Basch work experience
A career timeline built from the work history available for this profile.
Field Mechanic
CurrentRepair, troubleshoot, service different equipment. Works on mining equipment and logging equipment as well. Weld and fabricate small parts.
Technician
Repair, troubleshoot, and service many types of heavy equipment, particularly road repair and maintenance equipment. Some of the equipment that I work on are pavers, scrapers, loaders, graders, heavy trucks, pickup trucks, and excavators. I am required to go on the road for service calls, as well as work in the shop.
Mrap Technician
Repair and maintain MRAP's MV850's and GMV's. Perform services, component replacements, test drive. Troubleshoot, repair electrical and mechanical problems. Repair vehicles, inspect for faults and regular vehicle maintenance. Work on vehicle pneumatic systems, repair brakes, and vehicle cooling systems.
Heavy Equipment Mechanic
Repair and maintain equipment, vehicles, and MRAP’s. Work on vehicles, perform services, component replacements, test drive. Troubleshoot, repair electrical and mechanical problems. Repair battle damaged vehicles, inspect for faults and regular vehicle maintenance. Travel to different sites to perform field repairs. Work on vehicle pneumatic systems, repair brakes, and vehicle cooling systems. Install new vehicle upgrades, UIK for MATVs, and MWOs.
Mechanical Technician
Repair C-IED Entry Control Point Equipment/ Mine rollers troubleshoot electrical and hydraulic faults, test batteries replace parts. Order parts, Test and inspect equipment. Travel to different sites in country for repairs or install and set up of Entry Control Point equipment
Heavy Equipment Mechanic(Mrap)
Attended MRAP U, went through rollover training at NDC, Camp Atterbury, Ill. Repair and maintains MATVs and other MRAP vehicles. Embedded with U.S.M.C., work on Cougar vehicles, perform vehicle services, component replacements. Troubleshoot and repair electrical problems. Repair battle damaged vehicles, inspect for faults and regular vehicle maintenance. Work on vehicle pneumatic systems, repair brakes, and vehicle cooling systems. Install new vehicle upgrades, UIK for MATVs, and MWOs.
Heavy Equipment Mechanic
Repair and service heavy trucks, medium trucks, and construction equipment. Troubleshoot service and repair electrical problems on equipment. Replaced parts, serviced equipment, repair/ service brakes, hydraulic, and pneumatic systems. Repaired Hydraulic systems and components. Service and repair geared hubs. Order and look up parts using electronic manuals. Worked on HEMMT, HMMWV, FMTV, 5 Tons, M915, trailers, graders, scrapers, bobcats, cranes, combat earthmovers, loaders, SEE trucks and… Show more Repair and service heavy trucks, medium trucks, and construction equipment. Troubleshoot service and repair electrical problems on equipment. Replaced parts, serviced equipment, repair/ service brakes, hydraulic, and pneumatic systems. Repaired Hydraulic systems and components. Service and repair geared hubs. Order and look up parts using electronic manuals. Worked on HEMMT, HMMWV, FMTV, 5 Tons, M915, trailers, graders, scrapers, bobcats, cranes, combat earthmovers, loaders, SEE trucks and forklifts. Show less
Vehicle Mechanic
Repairs and replaces components on light, heavy wheeled military vehicles including engines, geared hubs, brakes, transmissions and transfer case etc. Service and repair geared hubs. Troubleshoot and repair electrical and pneumatic systems. Performs scheduled and unscheduled maintenance, works on LBE vehicles, equipment active and Army reserve LBE. Used ETM's and fed log. Worked on and repaired HEMMTs, FMTVS, 5 Tons, and generators.
Heavy Equipment Mechanic/Automotive Mechanic
Repaired, serviced, and maintained transportation equipment, medium and heavy trucks. Worked with 88M School to maintain effectiveness at Fort Bliss, TX. Recovered and repaired broke down vehicles. Replace and repair driveline components. Troubleshoot pneumatic and electrical problems. Service and repair geared hubs and brakes. Order parts, using e-tm’s. Worked on M915s, 5tons, FMTVs, HMMTs, 870 trailers.
Data Monitor
Collects Data; Maintenance information from selected Battalion. Collects miles and hours on selected vehicle models. Builds reports monthly with collected data, such as 5988E, DA2404 and service schedules. Reports are to help to get more accurate information for updated MAC charts, and for combat readiness.
Service Technician
Performed air conditioner services, factory recalls, DOT inspections, basic services for all incoming and outgoing diesel medium and heavy trucks. Repaired brakes, troubleshoot electrical problems, service hubs, adjust clutches, and repair drivelines.
Wheeled Vehicle Mechanic
Repaired and replaced brake parts. Performed heavy vehicle recovery in the field, and trained other personnel on equipment. Conducted full vehicle services, unit level inspections, changed batteries, and changed mechanical parts. Changed and worked on suspension, steering, geared hubs, electrical parts, driveline, fuel and PTO systems. Used technical manuals, computers for service schedules, and troubleshooting. Repaired and serviced hydraulic systems. Ordered parts using parts manuals… Show more Repaired and replaced brake parts. Performed heavy vehicle recovery in the field, and trained other personnel on equipment. Conducted full vehicle services, unit level inspections, changed batteries, and changed mechanical parts. Changed and worked on suspension, steering, geared hubs, electrical parts, driveline, fuel and PTO systems. Used technical manuals, computers for service schedules, and troubleshooting. Repaired and serviced hydraulic systems. Ordered parts using parts manuals. Maintained cooling/heating systems. Maintained light tracked vehicles and pulled M113 engine packs using crane. Worked on 5 Tons M35A2s, M35A3s, HMMWVs, HEMMTs, FMTVs, M915s, Loaders, SEE trucks, bulldozers, trailers, and generators. Show less
Colleagues at Wyoming Machinery Company
Other employees you can reach at wyomingcat.com. View company contacts for 261 employees →
Shawn Johnson
Colleague at Wyoming Machinery CompanyCasper, Wyoming, United States
View →
BM
Brian Martinson
Colleague at Wyoming Machinery CompanyCasper, Wyoming, United States
View →
GJ
Greg Jorgensen
Colleague at Wyoming Machinery CompanyUnited States
View →
KA
Kenneth Atkinson
Colleague at Wyoming Machinery CompanyCasper, Wyoming, United States
View →
TH
Tait Helmey
Colleague at Wyoming Machinery CompanyCasper, Wyoming, United States
View →
NB
Nancy Bywater
Colleague at Wyoming Machinery CompanyCasper, Wyoming, United States
View →
W(
Wally (Michael) Wilson
Colleague at Wyoming Machinery CompanyUnited States
View →
MM
Mark Mahnen
Colleague at Wyoming Machinery CompanyCasper, Wyoming, United States
View →
JB
Jason Bernatis
Colleague at Wyoming Machinery CompanyCasper, Wyoming, United States
View →
GW
Greg Wilson
Colleague at Wyoming Machinery CompanyGillette, Wyoming, United States
View →
Frequently asked questions about Andrew Basch
Quick answers generated from the profile data available on this page.
What company does Andrew Basch work for?
Andrew Basch works for Wyoming Machinery Company.
What is Andrew Basch's role at Wyoming Machinery Company?
Andrew Basch is listed as Field Technician at Wyoming Machinery Company.
What is Andrew Basch's email address?
AeroLeads has found 1 work email signal at @oldcastlebridgnorth.co.uk for Andrew Basch at Wyoming Machinery Company.
Where is Andrew Basch based?
Andrew Basch is based in Moorcroft, Wyoming, United States while working with Wyoming Machinery Company.
What companies has Andrew Basch worked for?
Andrew Basch has worked for Wyoming Machinery Company, Steve Mcgee Construction, Llc, Crh, Akima, Llc, and Mantech.
Who are Andrew Basch's colleagues at Wyoming Machinery Company?
Andrew Basch's colleagues at Wyoming Machinery Company include Shawn Johnson, Brian Martinson, Greg Jorgensen, Kenneth Atkinson, and Tait Helmey.
How can I contact Andrew Basch?
You can use AeroLeads to view verified contact signals for Andrew Basch at Wyoming Machinery Company, including work email, phone, and LinkedIn data when available.
What skills is Andrew Basch known for?
Andrew Basch is listed with skills including Maintenance And Repair, Electronics, Electrical Troubleshooting, Preventive Maintenance, Mechanics, Maintenance, Hydraulics, and Troubleshooting.
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trialCheck these profiles if this is not the Andrew Basch you were looking for.
View similar profiles