General Law Enforcement Duties in support and safety of patrol deputiesSecurity/Law Enforcement/Safety presence for parades, fund raisers and various charity/awards events.Support for mounted posse/patrol events and training.Florida Department of Law Enforcement Instructor Certification Training.Dignitary protection unit training for facility safety evaluation and protection of personnel and politicians. Recognition: Reserve Deputy of the Quarter 2nd Quarter 2015 and 1st… Show more General Law Enforcement Duties in support and safety of patrol deputiesSecurity/Law Enforcement/Safety presence for parades, fund raisers and various charity/awards events.Support for mounted posse/patrol events and training.Florida Department of Law Enforcement Instructor Certification Training.Dignitary protection unit training for facility safety evaluation and protection of personnel and politicians. Recognition: Reserve Deputy of the Quarter 2nd Quarter 2015 and 1st Quarter 2016, Letters of Appreciation from various charity organizations and Brevard County Sheriff’s Office units. Promotion to Corporal Sep 2016. Show less

Lead engineer for Electrical Group responsible for the Launch Release Systems for new Mobile Launcher at KSC. Currently supporting the design changes, installation, verification/validation procedures and manufacture of test boxes for support of Space Launch System umbilical and stabilizing systems. Completed fabrication and system testing prior to end of contract on Nov 30th 2017 for all installed systems and checkout boxes needed prior to Verification and Validation testing.

Networking group for volunteer work, job search support and training, community involvement.

• End to End Review of system designs for identification and mitigation of failure modes, single point failure conditions, and supportability of mission requirements.• Review of project documentation and drawings for technical and quality requirements.• Preparation of System Assurance Analysis documentation including FMEA, Fault Tree, Criticality Assessments.• Support/present to various levels of management for technical interface design review/acceptance meetings… Show more • End to End Review of system designs for identification and mitigation of failure modes, single point failure conditions, and supportability of mission requirements.• Review of project documentation and drawings for technical and quality requirements.• Preparation of System Assurance Analysis documentation including FMEA, Fault Tree, Criticality Assessments.• Support/present to various levels of management for technical interface design review/acceptance meetings (TIMs).• Support Drawing/Documentation release desk for creation of release authorizations and data entry for CMDS (Configuration Management Data System).• GIDEP representative: Review of Alerts for possible components issues/Verification that no alerted parts were purchased or used in various systems.• Safety engineering group support for accident investigations, electrical safety issues and facility inspections.Special Projects:Documentation and justification for use of connecters on cables in hazardous classified locations including internal arc capability and maximum available current at connectors.Updated and increased efficiency for documentation release desk DRA process. Show less

• Collection of information for energized electrical power distribution of numerous government facilities to support coordination study and ARC Flash labeling requirements.• Information included: substation breaker sizes, feeder sizes, panel sizes and breakers, trip unit settings, and transformers.• Trained co-workers as required for the use of Arc Flash Personal Protective Equipment and how to safely utilize bypass methods for energized equipment safety interlocks and to safely obtain… Show more • Collection of information for energized electrical power distribution of numerous government facilities to support coordination study and ARC Flash labeling requirements.• Information included: substation breaker sizes, feeder sizes, panel sizes and breakers, trip unit settings, and transformers.• Trained co-workers as required for the use of Arc Flash Personal Protective Equipment and how to safely utilize bypass methods for energized equipment safety interlocks and to safely obtain distribution substation and motor control center data collection requirements. Show less

• Facilities Monitoring and repair support for Electrical, Pneumatic, HVAC, Water, Elevator systems.• Facilities Maintenance and Repair Electrical distribution, Oxygen Deficiency Monitors and PLC based facility monitoring systems.• Drawing reviews and updates for corrections and as built field conditions.• Project management/review for installation and major modification projects.• Inspections of facilities.• System outage processing.• Launch console and field support… Show more • Facilities Monitoring and repair support for Electrical, Pneumatic, HVAC, Water, Elevator systems.• Facilities Maintenance and Repair Electrical distribution, Oxygen Deficiency Monitors and PLC based facility monitoring systems.• Drawing reviews and updates for corrections and as built field conditions.• Project management/review for installation and major modification projects.• Inspections of facilities.• System outage processing.• Launch console and field support for Space Shuttle program.• KSC Shuttle landing facility support for launch and landing operations. • System level to component level trouble shooting for ground support systems and equipment to support operational requirements and launch support schedule for Kennedy Space CenterSpecial projects:• Pad A/Pad B and VAB Construction of Facilities (COF) facility modifications project support including outage evaluation and processing, inspections, drawing reviews and submittals for as built drawing changes.• Field tracing of power sources for monitoring racks and update the outage processing system for future outage processing.• Evaluation and correction of installation issues for substation monitoring system after drawing conflicts caused wiring and software conflicts. Updated/verified system documentation and drawings for proper configuration.• Emergency operations support for Fire and Security departments for facility related issues for KSC buildings. Show less

• Direct and provide support to personnel for Preventative Maintenance, Installation, Inspection, Troubleshooting and repair of low voltage power distribution systems (Substations, UPS Systems, monitoring and control systems, power distribution equipment) in support of launch processing buildings and support equipment.• Oversee NASA funded major modifications of facilities and direct small to medium projects for upgrades to power systems including bill of materials, scheduling, and updates… Show more • Direct and provide support to personnel for Preventative Maintenance, Installation, Inspection, Troubleshooting and repair of low voltage power distribution systems (Substations, UPS Systems, monitoring and control systems, power distribution equipment) in support of launch processing buildings and support equipment.• Oversee NASA funded major modifications of facilities and direct small to medium projects for upgrades to power systems including bill of materials, scheduling, and updates to system level drawings and documentation.• Provide Redline Updates for facilities drawings to Design Engineering Group as required.• Task Team Leader for weekend work and various projects and operations as required including Overseas landing support in Spain, weekend work at KSC with no management present, launch support preps operations and grounding inspections for various launch and support facilities.• Create work instructions and bill of materials for small to medium projects, maintenance• Review of FMEA/CIL launch support documentation for launch support facilities• Overseas emergency landing site support and KSC Shuttle landing facility support for launch and landing operations.• Post Launch Pad Re-Entry electrical inspection team member• DART (Damage Assessment Re-entry Team) for hurricane assessment of facilities as required. Show less

• Testing of flight control, tracking and destruct systems for SRB electrical systems from individual black box assemblies thru fully integrated launch vehicle. • Support Design Reviews, meetings and approvals for system upgrades and weight reduction requirements for SRB flight hardware.• Led new design of C-Band Controller through the Post Flight inspection of tracking hardware that included supporting the review boards, trade studies, and operational requirements.• Troubleshooting… Show more • Testing of flight control, tracking and destruct systems for SRB electrical systems from individual black box assemblies thru fully integrated launch vehicle. • Support Design Reviews, meetings and approvals for system upgrades and weight reduction requirements for SRB flight hardware.• Led new design of C-Band Controller through the Post Flight inspection of tracking hardware that included supporting the review boards, trade studies, and operational requirements.• Troubleshooting SRB Range Safety/Flight control and tracking electronics stemmed from installation test to the return of hardware post flight.• Post flight inspections and report generation of SRB electrical hardware after launch and tow back to hangar AF that supported the integrated SRB vehicle reporting and inspections for Mission Management Team (MMT).• Provide hands on inspections and document of any in-flight anomalies or post SRB separation events that could include water in connectors or affecting flight hardware reuse.• Report generation for anomaly resolution panels/ presentation to senior level/NASA customers that also supported Flight Readiness Reviews (FRRs).• FMEA/CIL reviews/updates for SRB flight control and tracking hardware.• Flight system monitoring during launch countdown from Solid Rocket Booster Systems. Show less

• Testing of flight control, tracking and destruct systems for SRB electrical systems from individual black box assemblies thru fully integrated launch vehicle. • Support Design Reviews, meetings and approvals for system upgrades and weight reduction requirements for SRB flight hardware.• Review and update for Electrical System Drawing verifying proper incorporation of engineering changes and update for removal of old hardware and incorporation of new systems.• Troubleshooting SRB… Show more • Testing of flight control, tracking and destruct systems for SRB electrical systems from individual black box assemblies thru fully integrated launch vehicle. • Support Design Reviews, meetings and approvals for system upgrades and weight reduction requirements for SRB flight hardware.• Review and update for Electrical System Drawing verifying proper incorporation of engineering changes and update for removal of old hardware and incorporation of new systems.• Troubleshooting SRB Flight control electronics failures from installation test to the return of hardware post flight.• Post flight inspections and report generation of SRB electrical hardware after launch and tow back to hangar AF that supported the integrated SRB vehicle reporting and inspections for Mission Management Team (MMT).• Provide hands on inspections and document of any in-flight anomalies or post SRB separation events that could include water in connectors or affecting flight hardware reuse.• Report generation for anomaly resolution panels/ presentation to senior level/NASA customers that also supported Flight Readiness Reviews (FRRs).• FMEA/CIL reviews/updates for SRB flight control and tracking hardware.• Flight system monitoring during launch countdown from Solid Rocket Booster Systems.Major Projects:Altitude Switch Assembly(ASA) anomaly resolution for wiring insulation issue and verification of equipment installed for next flight clearance. Developed video borescope inspection and trained technicians for quick review, analysis and data collection to clear next flight issues.Bayonet Connector Anomaly team for visual verification of IEA (Integrated Electronics Assembly) verification of connectors being seated and verified locked after connector found not visually locked upon return from vendor.Redesign of DAS (Data acquisition system) for resolution of parachute video loss at water impact.Recognition:Engineer of the quarter awarded for work on anomaly resolution group for ASA Show less