Work as Drilling & Completion Superintendent to support Work Over activity on various Gas field reservoirs mainly on Gas Storage wells to side track/re-entry the reservoir section and perform new open hole/cased hole gravel packing completion operations, or perform permanent well abandoning operations.

Work as Drilling & Completion Engineer to support Work Over activity on Gas Storage wells for permanent well abandoning or for change out upper completion string and perform new lower gravel packing completion section.

Work as Drilling Completion Manager in the TaqTaq field (Kurdistan Northern Iraq), leading drilling/completion operations for the new appraisal horizontal wells and Side Track-W-Over re-entry operations for the installation of selective multi zone open hole completions.

• Overall responsibility to lead the operations activity in Sicily for drilling new appraisal wells and perform Work Over re-entry operations on existing wells in a challenging fractured limestone reservoir. • Prepared technical feasibility and BOD for the planning of new exploration wells within Irminio’s concessions• Cluster multiple Slots location, ESP and Long stroke sucker Rods pumps installations• Sensitive area of the operations with environmental constrains… Show more • Overall responsibility to lead the operations activity in Sicily for drilling new appraisal wells and perform Work Over re-entry operations on existing wells in a challenging fractured limestone reservoir. • Prepared technical feasibility and BOD for the planning of new exploration wells within Irminio’s concessions• Cluster multiple Slots location, ESP and Long stroke sucker Rods pumps installations• Sensitive area of the operations with environmental constrains Achievements: Successful completed the first appraisal well without LTI  Start the Long Production Well Testing in a simultaneous multiple operations scenario Show less

• Overall responsibility for supporting all offshore field activities, working on a 28:28 rotational basis• Work on WO re-entry and new plans for exploration, appraisal & development new wells in the Block

January 2013 - August 2013 in AnkaraSeptember 2013 - February 2014 in Erbil • Oversight of all field activity of Genel Energy, initially based in Ankara and later in Erbil office, in Kurdistan Northern Iraq• Responsible for completion & testing operations for development, appraisal and explorations wells• Managing operations in variety of reservoirs with different challenges, including sour and corrosive environment, over pressurized reservoir with a narrow window between PP… Show more January 2013 - August 2013 in AnkaraSeptember 2013 - February 2014 in Erbil • Oversight of all field activity of Genel Energy, initially based in Ankara and later in Erbil office, in Kurdistan Northern Iraq• Responsible for completion & testing operations for development, appraisal and explorations wells• Managing operations in variety of reservoirs with different challenges, including sour and corrosive environment, over pressurized reservoir with a narrow window between PP & FG• Evaluated and select materials and equipment based on specifics project requirements• Resolved challenges and issues given the sensitive location with numerous environmental constraintsAchievements: Successful completion of a tough exploration/appraisal campaign on over pressurised reservoirs with sour crude content in a complex geology, remote area operations without LTI incident Successfully side tracked and tested challenge thick crude Oil (15 Deg API) from Jurassic formation, using Jet pump completion and PCP pumps Show less

• Led the Block CI-27 offshore campaign to drill 2 extended reach wells (6800mTD with 78-80̊), 2 horizontal wells with pilot hole 8”1/2 and drain hole (+/-700m length) and a vertical explorations well • Applied specific SIMOPS rules to govern production, drilling and completion activities from an extended deck on the old production platform to overcome the limitations in anti-collision rules• Installed intelligent 5-1/2” mono-bore completions with “zero” TTBG slick line… Show more • Led the Block CI-27 offshore campaign to drill 2 extended reach wells (6800mTD with 78-80̊), 2 horizontal wells with pilot hole 8”1/2 and drain hole (+/-700m length) and a vertical explorations well • Applied specific SIMOPS rules to govern production, drilling and completion activities from an extended deck on the old production platform to overcome the limitations in anti-collision rules• Installed intelligent 5-1/2” mono-bore completions with “zero” TTBG slick line runs• Utilised smooth wells trajectories, steerable drilling BHA’s, surface cutting flow meter, OBM and ad-hoc centralization to successfully complete the projectAchievements:  Drilled & Complete the planned campaign, without incident and within the budget Drilled & Completed the wells without production platform shuts down during the drilling of the surface hole sections with anti-collision issues, and during completions installations Led ad-hoc “contingency” emergency tools strategy (Tractor conveying) to minimise downtime while drilling/completions operations in case of string stuck or others problems due to high daily Rig aggregate running costs Show less

• Led support activities for a Block 12 project, the largest exploration block in Georgia for Oil field activity, • Set up the Well Operations section from scratch, designing its structure and Well Delivery process scheme using the best of major Oil company practices in a small company profile • Worked with G&G and Reservoir teams to review and source talented candidates for work-over activity• Prepared budgets, AFE’s and technical procurement specifications for equipment, Rig… Show more • Led support activities for a Block 12 project, the largest exploration block in Georgia for Oil field activity, • Set up the Well Operations section from scratch, designing its structure and Well Delivery process scheme using the best of major Oil company practices in a small company profile • Worked with G&G and Reservoir teams to review and source talented candidates for work-over activity• Prepared budgets, AFE’s and technical procurement specifications for equipment, Rig Tenders/Services• Set up effective daily cost tracking and monitoring criteria for the Well Operation section• Negotiated and finalised the contract for 2 drilling rigs and one work-over Rig to deliver the campaign• Procured all equipment and set up Warehouse teams for materials management during execution phase• Set up marginal field development criteria and approved well work plans with Oil & Gas state agencies• Balanced technology and service costs for cost effectiveness, without sacrificing HSE principles• Supervised and prepared Drilling, Completions, Sand Fracturing, Work Over and Well testing programs, • Recruited national staff directly from local universities and set up a induction training & mentoring program within the companyAchievements: Successfully established a new team and processes. Managed a complex work campaign involving a variety of reservoirs and wells in remote locations, complex geology and high tectonic stress acting in the area of the operations Successfully performed on two work over re-entry and one new well the 1st hydraulic sands fracturing campaign job in Georgia, on a tight Oil wells reservoir, revealing great potential for future plans in the Block assigned Tested Coiled Tubing Radial Drilling in shallow/marginal tight Oil reservoirs Show less

• Provided engineering support for the Kashagan field project incorporating extreme reservoir, HP bottom hole conditions with 14,5% of H2s & 4,1% CO2 contents, ultra–low water depth, variable weather conditions• Work on the Drilling, Completions, Work-Over intervention programs, following the Well Delivery Process and best practice for severe sour environmental wells• Drove special project approvals and introduced new equipment in Kashagan hostile conditions• Liaised with… Show more • Provided engineering support for the Kashagan field project incorporating extreme reservoir, HP bottom hole conditions with 14,5% of H2s & 4,1% CO2 contents, ultra–low water depth, variable weather conditions• Work on the Drilling, Completions, Work-Over intervention programs, following the Well Delivery Process and best practice for severe sour environmental wells• Drove special project approvals and introduced new equipment in Kashagan hostile conditions• Liaised with Exploration/Reservoir/Engineering/Geology departments and Partners Technical committee• Developed processes to HSE, engineering principles, regulatory compliance and budgetary constraints• Prepared AFE’s, technical specs for tenders, evaluated bids and oversaw the award of contracts• Led the transition from Exploration to Development phase, working with K&M to execute technical training for office and rig staff for the drilling of the complex wells with “S” or “Slant” profiles• Developed daily “road-maps” to monitor drilling operations/budget and prevent incidents and string stuck• Completed rigorous risk assessment, QA/QC during the manufacturing process and pre-installation test• Developed ad hoc SIMOPS procedure for simultaneous operations with production and drilling/completions and re-entry interventions• Acted as deputy of the Head of Well Operation Engineering to ensure project continuity Achievements: Successfully completed the drilling, completion and testing of the wells in the appraisal development phase of the project  Set up the contractual strategy and completed the tender process for the selection of the high-tech DHE components for the mono-bore completion design 5”1/2 installed on the “D” Island wells  Designed the 1st "open hole" slotted Liner non-conventional completion as an alternative for the more complex and expensive "cased hole completion" installed in the first phase of the development. Show less

(ENI-BG-Chevron/Texaco-Lukoil)Project Team Leader for first Multilateral well June 2003 - December 2004Operational WO & Completion Engineer January 1999 - May 2003Provided engineering support for the design, development, and implementation of Deepening drilling projects, Workovers, Completions, Testing programs and procedures in Phase 2 & 2M of the P.S.A.►Conducted reviews to evaluate WO, completions and remedial operations jobs to upgrade their… Show more (ENI-BG-Chevron/Texaco-Lukoil)Project Team Leader for first Multilateral well June 2003 - December 2004Operational WO & Completion Engineer January 1999 - May 2003Provided engineering support for the design, development, and implementation of Deepening drilling projects, Workovers, Completions, Testing programs and procedures in Phase 2 & 2M of the P.S.A.►Conducted reviews to evaluate WO, completions and remedial operations jobs to upgrade their status►Specified and procured equipment & materials to execute operations, and assisted in feasibility studies►Actively participated in shareholder communications (i.e. TechCom, ConCom, Peer Reviews)►Identified fishing and intervention tools, and set up the criteria for the Fishing service►Tracked daily cost of workover operations to ensure they were within budget estimatesAchievements:✔Team leader for the first Multilateral well (Well 6394) successfully drilled & completed in Kazakhstan✔Overcame execution and planning/approval challenges due to these wells not being in their legislation ✔Saved more than 30% of rig time/well by suggesting a rigorous well bore preparation prior to rig move Show less

September 1984 - December 1993 : Work Over & Completion supervisorJanuary 1994 - December 1998 : Well Operation Engineer WO & CompletionWork on a large variety of ENI’s Oil, Gas & Gas condensate fields located on-shore and off-shore in the Italian districts• Managed a variety of routines and challenges work over, DST-well testing (including HP-HT wells in the Po’ Valley), new completion installations and permanent well abandoning• Work as well site supervisor in the slim hole… Show more September 1984 - December 1993 : Work Over & Completion supervisorJanuary 1994 - December 1998 : Well Operation Engineer WO & CompletionWork on a large variety of ENI’s Oil, Gas & Gas condensate fields located on-shore and off-shore in the Italian districts• Managed a variety of routines and challenges work over, DST-well testing (including HP-HT wells in the Po’ Valley), new completion installations and permanent well abandoning• Work as well site supervisor in the slim hole drilling, testing and completion campaign for marginal gas fields using slim hole drilling rig or Coiled tubing drilling techniques• Work as completion project engineer for the design and assessment of different selective stimulations techniques for the largest carbonate field located in Val D’Agri , Potenza (Italy) Show less