Angel Johan Tabata Email & Phone Number
@golder.com
LinkedIn matched
Who is Angel Johan Tabata? Overview
A concise factual answer block for searchers comparing this professional profile.
Angel Johan Tabata is listed as Geotechnical Quality Assurance Supervisor at Golder, a with 36 employees, based in Peru. AeroLeads shows a work email signal at golder.com and a matched LinkedIn profile for Angel Johan Tabata.
Angel Johan Tabata previously worked as CQA Supervisor - Geotechnical Instrumentation at Golder and Instrumentation and Geotechnical Monitoring Supervisor at Applus Norcontrol. Angel Johan Tabata holds Ingeniero Geologo, Ciencias Geológicas Y De La Tierra/Geociencias from Universidad De Oriente (Ve).
Email format at Golder
This section adds company-level context without repeating Angel Johan Tabata's masked contact details.
AeroLeads found 1 current-domain work email signal for Angel Johan Tabata. Compare company email patterns before reaching out.
About Angel Johan Tabata
I am a geological engineer with more than 10 years of experience in geotechnics applied to mining and civil works in Venezuela, Ecuador and Peru. I have served as a quality assurance supervisor (CQA) in construction projects of mining works, such as tailings dams, slope stability and support works (Laying of Shotcrete, Installation of dynamic barriers) and geotechnical instrumentation.I have also been a consultant where I have developed geotechnical studies for the design of foundations, as well as simian risk studies for various projects.Experience in:Slope support: shotcrete • cement grouts, pull out tests and installation of anchor bolts in rock, installation of dynamic barriers.Geotechnical Instrumentation: Supervision and Installation of Geotechnical Instrumentation (Inclinometers, Piezometers, Settlement Cells, etc.) • Monitoring, interpretation and analysis of geotechnical instrumentation data. I have participated in large-scale projects such as Cerro Corona (Gold Fields La Cima), Growth of the Phase VI-b Tailings Dam (Compañía Minera Antamina), Line 2 of the Lima Metro (Line 2 Construction Consortium)Engineering: Geotechnical studies for the design of foundations for civil engineering works • Calculation and design of foundations (Direct and deep) • Estimation of the bearing capacity of the soil • Analysis of slope stability • Preparation of geotechnical reports • Preparation of technical-economic proposals • Use of Geotechnical Software (Geostudio • Rockscience)Seismic hazard: I have carried out seismic hazard studies for civil engineering works, as a consultant, in Venezuela, Ecuador and Peru; developing Historical seismicity analysis of the region • Neotectonics of the area of influence of the projects • Characterization of seismogenic sources • Deterministic and probabilistic analysis to define the seismic hazard • Preparation of seismic hazard curves for maximum horizontal acceleration of the terrain. • Determination of spectra of seismic hazards • Determination of acceleration of spectral acceleration parameters for maximum earthquake • Preparation of technical reports of seismic hazards • Use of Crisis software.
Listed skills include Suelo, Autocad, Microsoft Office, Planeamiento De Proyectos, and 25 others.
Angel Johan Tabata's current company
Company context helps verify the profile and gives searchers a useful next step.
Angel Johan Tabata work experience
A career timeline built from the work history available for this profile.
Geotechnical Quality Assurance Supervisor
CurrentI worked as CQA supervisor for the project "Regrowth of the Tailings Dam at 4135.00 m a.s.l. of the Antamina Mining Company ”. In charge of quality assurance of slope support works (Installation of anchor bolts, shotcrete, Installation of Dynamic Barriers) • Earth movement and cuts of slopes • Construction of containment dikes • Review and approve procedures Quality, Quality Dossier issued by the contractor • Issue management documents (SVR's and / or NCR's)
Cqa Supervisor - Geotechnical Instrumentation
I worked as CQA Supervisor of Geotechnical Instrumentation of the Project "Regrowth of the Tailings Dam at level 4135.00 m above sea level of the Antamina Mining Company". In charge of:Supervise Geotechnical Instrumentation Installation • Review and Approve installation procedures • Perform periodic monitoring of Geotechnical instrumentation • Coordinate with the Client and the contractor company Geotechnical Instrumentation installation works • Review plans and Quality Dossier regarding the installation of Geotechnical instrumentation Presented by the contractor company.
Instrumentation And Geotechnical Monitoring Supervisor
Supervisor of geotechnical and structural instrumentation in the Tunnel Construction project for Line 2 of the Lima Metro.
Instrumentation And Geotechnical Monitoring Supervisor
I worked as Instrumentation and Geotechnical Monitoring Supervisor at the Cerro Corona Project, Goldfields La Cima. Among my main functions:Manage the geotechnical instrumentation installed for monitoring in the tailings dam, pit and waste material deposits of the project • Installation and monitoring of: Casagrande-type and vibrating wire piezometers, inclinometers, Settling cells, Accelerometers • Regrowth of piezometers and inclinometers.
Instrumentation And Geotechnical Monitoring Supervisor
I worked as Instrumentation and Geotechnical Monitoring Supervisor at the Cerro Corona Project, Goldfields La Cima. Among my main functions:Carry out inspections taking as a reference the potential failure modes and the surveillance programs defined for the project • Manage the geotechnical instrumentation of the project: data reading, collection, collation and systematic storage for the issuance of reports that included recommendations aimed at an acceptable operation , calibration and maintenance of measuring instruments and equipment • Identify and report anomalous behaviors of the instruments installed in the Tailings Dam areas and surroundings in order to report in a timely manner and control measures will be implemented.
Geological / Geotechnical Engineer
Engineer of the technical department of geotechnics and geology, providing technical support in different geotechnical and geology projects.
Technical Manager Of The Department Of Geotechnics
I participated in different geotechnical consulting projects in different provinces of Ecuador developing geotechnical and seismic risk studies for various projects.
Geologist Engineer (Free Lancer)
I worked as a consultant in the area of geotechnics conducting various geotechnical studies for the design of foundations as well as seismic hazard studies for various Engineering projects in different regions of the country
Geotechnical Consultant
Contracted in the form of professional fees, serving in writing technical reports and advice for land planning exploratory field campaigns, in which:- Developed spreadsheet that allowed optimizing the processing time of the data from laboratory and field.- Developed geotechnical reports associated with the project "Studies of soils in operational areas of San Gas production I took (12 reports in total).- Perform calculations of foundation design and flexible pavements.- Generated constructive for the design of foundations, design of pavements and earthworks recommendations.- Attend technical meetings with the bargaining unit (Petroleos de Venezuela SA).- Advised in the area of geotechnics to MAFRAN Projects.
Operations Coordinator
I worked as geotechnical field coordinator in the project "Soil Study and Geotechnical Management in Junín Early Production Surface", which was divided into four field acquisition activities: Geotechnical Surveys, Open-pit Excavations (Calicatas), Down-type drilling seismic hole and electrical resistivity measurements.
Geologist Engineer
Project: Geophysical Study for the construction of a Liquefied Natural Gas plant for PDVSA.I was in charge of Supervising and controlling the data acquisition activities of Microtremor Refraction, environmental noise, Gravimetry, electrical resistivity, Refraction 2D Seismic data.
Geologist Engineer
I participated in different projects being in charge of the Supervision of geotechnical exploration works • Supervision of soil mechanics tests • Preparation of geotechnical reports • Preparation of seismic hazard studies for various projects • Quality control of soils and concrete
Colleagues at Golder
Other employees you can reach at golder.com. View company contacts for 36 employees →
Kelsey Kruse
Colleague at GolderThunder Bay, Ontario, Canada
View →
MK
Milla Korkalainen
Colleague at GolderHelsinki, Uusimaa, Finland
View →
AS
Anne Smith
Colleague at GolderSouth Africa
View →
YC
Yan Chen
Colleague at GolderJing'An District, Shanghai, China
View →
CD
Cristina Deberti
Colleague at GolderTurin, Piedmont, Italy
View →
JC
James Caron
Colleague at GolderStonewall, Manitoba, Canada
View →
BH
Brian Huebner
Colleague at GolderUnited States
View →
AS
Andrew Sullivan
Colleague at GolderGreater Melbourne Area, Australia
View →
MS
Marika Sunesson
Colleague at GolderGreater Gothenburg Metropolitan Area, Sweden
View →
JT
Jennie Timms
Colleague at GolderOshawa, Ontario, Canada
View →
Angel Johan Tabata education
Frequently asked questions about Angel Johan Tabata
Quick answers generated from the profile data available on this page.
What company does Angel Johan Tabata work for?
Angel Johan Tabata works for Golder.
What is Angel Johan Tabata's role at Golder?
Angel Johan Tabata is listed as Geotechnical Quality Assurance Supervisor at Golder.
What is Angel Johan Tabata's email address?
AeroLeads has found 1 work email signal at @golder.com for Angel Johan Tabata at Golder.
Where is Angel Johan Tabata based?
Angel Johan Tabata is based in Peru while working with Golder.
What companies has Angel Johan Tabata worked for?
Angel Johan Tabata has worked for Golder, Applus Norcontrol, Grupo Graña Y Montero, Golder Associates, and Aoc Ingeniería.
Who are Angel Johan Tabata's colleagues at Golder?
Angel Johan Tabata's colleagues at Golder include Kelsey Kruse, Milla Korkalainen, Anne Smith, Yan Chen, and Cristina Deberti.
How can I contact Angel Johan Tabata?
You can use AeroLeads to view verified contact signals for Angel Johan Tabata at Golder, including work email, phone, and LinkedIn data when available.
What schools did Angel Johan Tabata attend?
Angel Johan Tabata holds Ingeniero Geologo, Ciencias Geológicas Y De La Tierra/Geociencias from Universidad De Oriente (Ve).
What skills is Angel Johan Tabata known for?
Angel Johan Tabata is listed with skills including Suelo, Autocad, Microsoft Office, Planeamiento De Proyectos, Microsoft Excel, Microsoft Project, Industria Petrolera, and Perforaciones.
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trialCheck these profiles if this is not the Angel Johan Tabata you were looking for.
View similar profiles