Please complete the CAPTCHA to continue
@dg.ca
✓
LinkedIn matched
A concise factual answer block for searchers comparing this professional profile.
Anthony Laughlin is listed as Process Engineer at BW Design Group, based in Vancouver, Washington, United States. AeroLeads shows a work email signal at dg.ca and a matched LinkedIn profile for Anthony Laughlin.
Anthony Laughlin previously worked as Engineer IV at Fluor Enterprises, Inc. (Europe) and Engineer IV at Fluor Enterprises, Inc. Anthony Laughlin holds B.S. Mechanical Engineering, Thermodynamics from Washington State University.
This section adds company-level context without repeating Anthony Laughlin's masked contact details.
AeroLeads found 1 current-domain work email signal for Anthony Laughlin. Compare company email patterns before reaching out.
Process Engineer, leading the process development and project engineering of multiple first-of-a-kind (FOAK) projects for a confidential client. Examples: Plated waste treatment, azole destruction, copper waste treatment and solvent collection.Enjoy hands-on, frequently changing work environments with challenging projects.Technical subject matter expert (SME) on the process improvement of chemical and gas manufacturing operations with an emphasis on the microelectronics and pharmaceutical industries including:• Successfully rescuing off track, moderate to large scale capital projects that had escalating costs and repeatedly missed timelines by developing and assuring adherence to new budgets and schedules.• Project management of phases involving safety, design, services during construction (SDC), requests for information (RFIs), submittals, summary reports for schedule and budget, and root cause analysis (RCA).• Serving as site safety contact for superfund site, documentation / reporting of safe disposal of hazardous and non-hazardous waste materials, and liaison with department of ecology for waste reduction improvements.• Pharmaceutical experience involving regulatory compliance and current good manufacturing practices (cGMPs).• Proposing improvements to leadership like intuitive engineering in cylinder operations which led to the redesign of a less expensive delivery container per CFR regulations.• Domestic and international travel.• Representing Process Engineering in high level discussions and audits with external clients.• Employing good engineering practices (GEP) to develop work procedures and best practices.• Supporting procurement and quality with supplier evaluation and selection phases before updating supply network.• Effectively communicating with customers and collaborating across cross-functional teams to ensure engineering objectives are completed effectively within expected timelines.• On-boarding and mentoring new hires.
Listed skills include Engineering, Commissioning, Piping, Construction, and 23 others.
Company context helps verify the profile and gives searchers a useful next step.
A career timeline built from the work history available for this profile.
Wilmington, Us
Process engineer: Lead the first of a kind wastewater project with multiple past engineers to successful completion. Transfer technology to other sites within company.Lead the start of first of a kind projects on confidential client to completion in waste treatment systems.
Lead engineer for slurry and solvent chemicals for refurbished fab.
Process engineer on start up Actemra (interleukin receptor) for rheumatoid arthritis.Design Lead Engineer, Confidential Client, Hillsboro, OR: Lead capacity finding for UPW, process waste, process water at site to support new manufacturing process.
Design Lead Engineer, Confidential Client, Hillsboro, OR: New bulk solvent chemicals, New solvent room fit out for new chemistries and new special gas building with fit out to support new manufacturing process.
Design Engineer, Confidential Client, Hillsboro, OR: Add new bulk chemical, slurry and special gas upgrade to support expansion for next manufacturing process.Project Engineer, SolarWorld, Hillsboro, OR: Upgrade startup of existing facility to new expanding production, chemical, gas equipment and deionized water system. New pump upgrade and water distribution.Project Engineer/Design, Confidential Client, Hillsboro, OR: Hydrogen bulk gas installation, increase of oil free air capacity upgrade and process cooling water upgrade of existing building.Project Engineer, Confidential Client, Hillsboro, OR: UPW upgrade for Cub 2 expansion. New 2nd pass reverse osmosis units from GE, increase acid waste neutralization treatment capacity, increase heat exchanger capacity to support reverse osmosis units. New H2SO4 system. Design and install temporary H2SO4 to support hydrogen fluoride waste & copper waste. Model treated waste flows to match new capacities, with lift stations to balance flow with treatment. Bulk gas installation, new oil free air capacity upgrade and process cooling water upgrade of existing building.Engineer III, SolarWorld Process PM/Design: Recommission 10-year mothballed deionization facility. Split system into 18 ohm water and hot water system to support new tools. Recommission 10-year mothballed waste water treatment system.Engineer III, Solaicx Process PM/Design: Warehouse facility converted to manufacturing of igots. New process cooling water system, clean dry air system, industrial water system and relocating Sumco and recommission chillers to support HVAC.Engineer III, Confidential Client, Hillsboro, OR: Project support for PSSS/Process Fab systems. Modeling Fab utilities using “System Demand”to anticipate system capacity needs as tools are identified in plan of record. Study of modeled waste, evaluate the need to add or resize piping.
Engineer III, HemCon Medical Technologies Inc, Tigard, OR: Design of IW, OFA, N2 system, Argon system and SDC expansion of manufacturing facility for Hemorrhage Control Bandage: New class 10,000 cleanroom with mezzainne storage, new waste system,and new HVAC units and ductwork.Engineer III, Celerity, Tualatin, OR: Design/Build support utilities for CDM production move from Tempe, AZ. Utilities, deionized water componet system from U.S Filter, Oil Free Air system with compressor and dryer upgrade and waste drain system.
Commission and Qualification Engineer, Eli Lilly, Indianapolis, IN: Humalog® (insulin lispro), HCIP “High Capacity Integration Project” for Eli Lilly. Responsiblities included commissioning and qualification of new tanks including flushing, writing of task sheets, coverage testing new tanks, commissioning CIP, writing protocols for systems, and commissioning life safety systems.System Lead, Eli Lilly, Indianapolis, IN: Xigris® Bioreactor tanks. Assemble documentation from vendors and document construction modifications for system. Resolve non-conformances in equipment and instrumentation, substantiate gap analysis. Validation Lead responsibilities included design of high purity gas delivery systems for bulk gases and gas cabinets. Designed storage, neutralization equipment and transporting of corrosive, flammable, pyrophoric, water reactive and oxidizing gases.Engineer III, Aloca, Troutdale, OR: Evaluate, write specifications and assemble drawings to clean up hazardous materials on site. Drain transformers of PCBs for disposal and set up nitrogen purge system to each drained transformer.Engineer III, Concentrated Waste Addition, Cub 2, Confidential Client, Hillsboro, OR: CCW tank addition, doubled capacity for Cub 2. Engineer III, Research Greenfield Fab, Confidential Client, Hillsboro, OR: Layout of trench waste piping, Design of MDP Natural Gas DVB, gas cabinet & vmb layout, routing of underfloor tubing to tools, BCD layout of cdms & cvbs, PCD layout of distribution/mixing cabinets, space management. Onsite SDC for PSSS and Process systems.
Aerospace plastics and fiber re-enforced materical on aircarft. Swedlow Corporation supplied these acrylic components to major aircraft manufactures that included Northrup, Douglas, Boeing, and Lear. Leader in manufacturing complex transparent systems for the aircraft and aerospace industries that included cockpit windows, canopies and windshields. Part of A-10 development team.
Quick answers generated from the profile data available on this page.
Anthony Laughlin works for BW Design Group.
Anthony Laughlin is listed as Process Engineer at BW Design Group.
AeroLeads has found 1 work email signal at @dg.ca for Anthony Laughlin at BW Design Group.
Anthony Laughlin is based in Vancouver, Washington, United States while working with BW Design Group.
Anthony Laughlin has worked for Bw Design Group, Fluor Enterprises, Inc. (Europe), Fluor Enterprises, Inc, Evergreen -Edc, and Evergreen Engineering.
You can use AeroLeads to view verified contact signals for Anthony Laughlin at BW Design Group, including work email, phone, and LinkedIn data when available.
Anthony Laughlin holds B.S. Mechanical Engineering, Thermodynamics from Washington State University.
Anthony Laughlin is listed with skills including Engineering, Commissioning, Piping, Construction, Project Engineering, Process Engineering, Engineering Management, and Instrumentation.
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trial Search contacts