Project Name : Thomson–East Coast Line Stage 4 - Mass Rapid Transit line in Singapore Installing fire protection equipment requires coordinating the subcontractor to adhere to the architect's designs, Inspects and Verify the quality of work carried out by workers of subcontractors  According to the installation process and BOQ. purchasing the fittings for the sprinkler system, Fittings for hose reels, dry riser pipes, conduit, fire rated cable, and fire alarm system and pipe support materials(wall plug, pipe hanger, Victaulic fittings, valves and sprinkler pump fittings)  Attending site walks on a regular basis with all SWC and civil contractors helps us stay informed about the upcoming timeline for finishing civil works, as well as where to install our equipment and where conduit and pipe penetration openings. Apply for a delivery permit and the necessary risk assessment documentation to deliver the materials to the location. Conducts site inspections, gathers data, and forwards information to the design team so that drawings can be prepared when installation activities progress and adjustments are made to the area specified in the drawing.. Oversee the workforce of subcontractors and use the safety toolbox every day at work. Be in charge of verifying subcontractors' claims as shown on the drawing, and make sure the work is completed before signing the claim. Participating in all site meetings with the Land Transport Authority Project Team regarding matters concerning the advancement and synchronization of the project.  Participating in site walks with the LTA Project Team to confirm ongoing installation and completion; submitting documentation and drawings for claim when progress is verified.  Preparing the System Test pack, Collect the appropriate drawings and attach, Collect the Datasheet, Collect the Factory test report, Attach the Installation Check list, Attach Function Check list.

• Service and maintenance of Fire Detection, EWIS Systems • Installation/replace of smoke detectors, Manual call point, Relay modules.• Level 1 and Level 2 service all Fire Projection Equipment’s.• Fault Finding and Troubleshooting the fire alarm field devices fault.• Servicing Smoke & Heat Detectors, Manual Call Point, Relay Module, Input/output module & Fire Alarm Panel Equipment’s• Servicing Fire smoke Door, Public address system Emergency warning Intercom system, Sprinkler controls valves, Fire hydrant and Sprinkler Pump system • Servicing Fire Extinguisher , FM200 suppression system, Fire hose reel system, Fire Extinguisher and Fire Blanket

Job Site: Sentosa Gateway Tunnel, CTE Tunnel, Woodsville Tunnel Authority Submission, Permit to Work Submission, Site Administration & Management Plan, Lead and manage a team of Supervisors and workers in Inspect & Servicing Fire Alarm & Fire Fighting System  Plan, Lead and manage a team of Supervisors and workers in Service & Maintenance if Fire Alarm System Smoke & Heat Detectors, Manual Call Point, Linear Heat Detection System Contact & Supervisory Module & Fire Alarm Panel Equipment’s.  Fire Alarm Product being service is TYCO, EST3 Fire alarm Panel & Equipment’s Linear Heat Detection servicing Product is AP Sensing. Servicing Fire Fighting System Hose reel, Deluge Water System, Sprinkler Pump System, and Foam Fire Suppression System, Inergen gas system. Inspection of Fire alarm & Fire Protection Devices & Equipment’s Done weekly, monthly & yearly testing of Fire Protection equipment’s. Report regularly on technical progress and monitor engineering schedule Provide Technical support to site supervisors and technicians. Timely respond to emergency calls in respect to facilities breakdown. Attend to Weekly & Monthly Site management Meeting with Land Transport Authority and Company meeting.

 Programming & Commissioning for A/A job of Siemens EP5, EP7 Fire & Gas Detection System  Additional & Alteration works with Existing Fire alarm Zones in the Building.  Permit to Work Submission for Commissioning works & Service. Coordination with Sub Contractor’s for Installation of New Fire Detection Devices Plan, Lead and manage a team of Supervisors and workers in Servicing & Commissioning of Fire Alarm System Devices of Smoke & Heat Detectors, Manual Call Point, Contact & Supervisory Module & Fire Alarm Panel Equipment’s. Carry out the Programming for Newly Installed Devices as per Customer requirement. Downloading the Fire Alarm Software for the Particular Sub Fire Detection Panel & Main Fire Alarm Panel. Carry out the Troubleshooting works for clearing the Fire Alarm Fault (OPEN LINE/SHORT LINE/GROUND FAULT/ DETECTOR’S FAULT etc.) Testing of Fire Detection Devices like Heat Detector’s, Smoke Detectors, Manual Call Point & Control Output / Monitoring Devices. When Testing the System Verify Exactly Fire Alarm Devices Address, Zones as Per Program assigned.  Plan & Carry out Site Acceptance Test, Attend Testing of Fire Alarm System by Registered Inspector of Fire & Safety in Singapore before hand over the Project. Submit the Testing & Commissioning reports.• Test pack Index Preparation• Collect the appropriate drawings and attach• Collect the Datasheet • Collect the Factory test report• Attach the Installation Check list & Attach Function Check list.

 Installation of Tyco MZX Fire alarm System, Fire Sprinkler System & PA System Authority Submission, Permit to Work Submission, Site Administration & Management Plan, Lead and manage a team of Supervisors and workers in implementing Fire Protection System Installation, Sprinkler Pipe, Valve, Pressure Gauge, Pump & Sprinkler Plan, Lead and manage a team of Supervisors and workers in implementing Fire Alarm System Installation Conduits, Wiring, Smoke & Heat Detectors, Manual Call Point, Contact & Supervisory Module & Fire Alarm Panel Equipment’s Plan, Lead and manage a team of Supervisors and workers in implementing Public Address System types of Wall & Ceiling mounted System. Inspection of Fire alarm & Fire Protection Devices & Equipment’s Cable continuity check carried out Loop Check carried out. Function check of Fire Alarm Logic Input / Output carried out Function check of Jockey Pump & Sprinkler Pump Cut in / Cut off & Pressure  Function check of Public Address System Assist and Report to Project Manager Supervision of work, Liaise with Sub contractors, Supervisors & Workers. Attend Site Coordination meeting & Safety Meeting with Owner, Main Contractors , Sub Contractors for overall Project operation Preparing the System Test pack• Test pack Index Preparation• Collect the appropriate drawings and attach• Collect the Datasheet • Collect the Factory test report• Attach the Installation Check list• Attach Function Check list. Installation Inspection with Client Punch List Track record Pre commissioning carried out ( PSSR walk, HAZOP) Final Dossier Documentation

Project Description: Installation of Fire alarm System (Tyco Minerva 8 Panel) & Installation of Sprinkler Pipe, Valve& Sprinkler, Pre Action System, Deluge Valve.Servicing, Troubleshooting & Maintenance Fire alarm System: (Tyco-Minerva8 Panel), Inert gas system (Notifier AFP 200) & Inert Gas System (Tyco – Minerva 80 Panel).Fire Protection System: Sprinkler Pump, Hose reel Pump, Pre action system, Fire Hydrant, Dry Riser.Client: SBS Transit (NEL Depot / NEL Mass Rapid Transit Station - Railway)Job Description: Installation of Tyco Minerva 8, 80 Fire alarm Panel Installation of Conduits & wiring as per requirement. Installation of Smoke Detectors, Heat Detector’s, Relay Module, Contact Module & Fire alarm devices.  Installation of Fire Panel Equipment’s & downloading the software.  Testing & Commissioning of Fire alarm. Servicing, Troubleshooting & Maintenance of Fire alarm system & Fire protection system as follows. Test an alarm sensors, such as Heat and smoke detectors, per manufacturer specifications. This requires knowing about the different sensors—and their testing requirements, failure modes, and re-installation requirements. Simulate inputs and test the Annunciations. This requires specific knowledge of the system under test. Set sensitivity. This requires an understanding of the particular system, the specific application, and fire detection theory. Coordinate with fire department to test the input to their system.Check the battery for corrosion and expiration date, then take appropriate action, if necessary. Testing Heat Detector’s, Smoke detectors, Manual call point & Testing Relay module, Supervisory module & Check Panel power supply & Batteries. Installation of Sprinkler Pipe, Pump, Valve, Sprinkler & Pre Action System. Fire Protection System Sprinkler Pump system, Hose reel pump system, Pre action system Flow switch test, Dry riser & Fire Extinguisher

Project Description: Installation of Fire alarm System (Edward System Technology 3 panel), Servicing, Troubleshooting & Maintenance of Fire Alarm System -Honey well XLS 1000 andEdward System Technology 3 panel.Client: SBS Transit (NEL Depot)-Sengkang, Changi Airport Terminal 2, Cluster A Changi.Job Description: Installation of EST 3 Fire alarm System Panel Installation of Conduits & wiring as per requirement Installation of Smoke Detectors, Heat Detector’s, Relay Module, Contact Module & Fire alarm devices.  Installation of Fire Panel & Downloading the software.  Testing & Commissioning of Fire alarm.  Servicing, Troubleshooting & Maintenance of Fire alarm system.Testing Heat & Smoke detector’s, Manual call point, Relay module, Supervisory module. Replace the devices when ensured that it’s faulty. Provide technical assistance and resolution when engineering problems are encountered Carry out testing and commissioning activity for system integration. Involving trouble shooting of the hardware. Taking care of safety work procedures and risk management.  Provide testing and Weekly, monthly servicing of Fire alarm system on various sites. Done monthly, weekly inspection and maintenance of fire alarm equipments. Preparation of documentation. To co-ordinate and maintain good relationship with our clients. Involve in trouble shooting & Preventive Maintenance workstations. Done weekly and monthly testing of fire alarm equipments. Prepare monthly status / progress report for submission to management  Liaison with local authorities where necessary Evaluate variation proposal for additional / variation work Prepare & control necessary documents Attend to Site management and Company meeting, Prepare the minutes of meeting.

Servicing, Troubleshooting & Maintenance Fire alarm System: Inert gas system (Notifier AFP 200) & Inert Gas System (Tyco – Minerva 80 Panel).Fire Protection System: Sprinkler Pump, Hose reel Pump, Pre action system, Fire Hydrant, Dry Riser. Provide testing of Fire alarm System Panel & Fire Protection System and Weekly, monthly servicing on various sites. Testing of Smoke, Heat Detector’s & Manual call point , While activation of input signal to Fire alarm panel check all output module working status like control Relay, Supervisory module. Done monthly, weekly inspection and maintenance of fire alarm equipment’s. Preparation of documentation. To co-ordinate and maintain good relationship with our clients. Involve in trouble shooting & Preventive Maintenance workstations. Provide support, technical advice in clearing the faults. Report regularly on technical progress and monitor engineering schedule Prepare and monitor responsibilities for all parties involved to ensure work progresses smoothly and completed within scope, schedule, and budget Prepare monthly status / progress report for submission to management