- Cmart/Drake/PTW/CRQ/WINS/MOPS - Liaise with PC or clients for application and approval to be able to provide to the field teams. - Review and understand construction drawings and designs to effectively complete site build.- Assist Implementation Manager to co-ordinate all site activities with relevant parties to ensure timely and efficient site completion and client satisfaction. - Offer advice and knowledge to teams in terms of internal and external installation standards and practices. - Support IM to ensure appropriate and timely organisation of plant, materials, and human resources.- Be the facilitator between the office support staff and field staff in resolving on site issues.- Assist to identify, correct, record, and close out defects / NCRs.- Accurate analysis of engineering designs and design clarifications. - Attention to detail, and accuracy in all completed project documentation. - Coordinate and ensure submission of hand over documentation upon site completion. - Assist the project team in providing accurate BOM and material orders as per given design.- Support to IM if required in relation to job 3rd party costs, tools/equipment hire or procurement and advice on variation works. - Attend any client meetings relating to new or revised build practices and work instructions. - Assist and support build teams by sharing experience and knowledge to mentor teams and individuals to achieve FTR (First time right) and on-time completion of build.- Assist IMs with pre-build site surveys and feasibility reports, including assessment of sub-contractor and plant requirements.- Ensure reporting requirements, including daily progress reports are adhered to.- Liaise with client’s and property managers/owners for site access and be able to support and provide required documentations.- Assess on site situations and ensure work practices are done safely in accordance with the clients and company’s HSE policies.

- Installing and maintaining WCDMA/LTE/4G/NBN/5G technologies for Telstra network.- Installation of BBH (Baseband Hotel) racks with BB6630, BB5216, and Router R6675.- Installation of Radio Base Stations, Terminating Hybriflex Cables & Coaxial feeder cables/tails, earthing, cable trays, diplexers, combiners.- Call off the bill of materials (BOM) - Installation of DC Power rack systems (Eltek & Vertiv SP33) including rectifiers, batteries and load testing.- Integration/Commissioning Radio Base Stations into client networks. PIM, VSWR and Sweep Testing- Troubleshooting, replacing defective equipment, fault finding and clearing site investigation, and monitoring project development- Installation of microwave indoor unit and outdoor unit and commissioning.- Technical installs, testing, commissioning of base station sites- Call testing of sites and uploading of all as built paperwork for site completion- Installation of Optic Fibre, including testing and maintenance for major carrier clients.

- Domestic, industrial and commercial wiring- Camera installation- Data cabling-Switchboard Upgrade-Solar

- Network monitoring and analysis using network tools and SolarWinds- Telemetry Design- Traffic shaping using Allot- Allot server data collection for customers- Configuration of routers and switches. - Roaming Configuration and creation of APN- Solving DNS and email issue- Adding routes and policies on checkpoint firewall- Signal and data trace on numbers.- Installation of cache servers (google & facebook)- Conduct IREG/roaming test for GPRS, 3G and 4G- SGSN roaming configuration for partners- Prepare network performance and ad-hoc reports- Technically support the following servers and network element:1. Serving GPRS Support Node (SGSN)2. Gateway GPRS Support Node (GGSN)3. MPBN (Smart edge routers)4. Routers and switches (cisco)5. Checkpoint firewall O&M also networking monitoring6. MPX Optimizer and load balancer O&M plus monitoring for traffic7. Blackberry support

-Installation of ZTE Radio Base Station for GSM/UMTS & LTE system (2G, 3G & 4G)-Installation and Commissioning / De-commissioning of Ericsson 2G, 3G (Node B) Radio Base Station and prepare commissioning report.-Manage RBS installation for 2G,3G, 4G and 4G+.-Carry out RBS Swap outs (hot/cold) for 2G and 3G radios.-Installation of DC power cabinet (Eltek Rack & Wavecom cabinet)-Link cut over from old transmission to a new one.-Worked with following Ericsson (Indoor / Outdoor) Radio Base Station •RBS 6000, 3116, 3206, 2216, 2116, 2206, 2202, 2111.-Installation and commissioning of following Transmission Links (SDH/PDH) both indoor/outdoor.•Harris stratex – Eclipse Edge link•Aviat links - MPLS•Mini links•Nokia DMR•Traffic nodes•Alvarion and RED - MPLS-Rigging Works for antenna, feeder, fiber and microwave wave transmission carried out on the -Following Type of Towers, Triangular Mast, Monopole, Triangular Lattice, Square Lattice and also Roof Tops-Installation of Andrews microwave antenna (dimension from 0.3 – 2.4 meters), Also the grid pack antenna. Working on the inter island microwave links.-Installation of Cisco router, configuration and attend fault.-Worked with LDF5-50, LDF6-50 feeder cables.-Attend base station and transmission faults. -Installation of boosters and repeater. -Attending of customer complaints regarding network and flash net issue. -Generator maintenance, servicing and fuel fill up.-Carry out sweep test with bird analyzer on the feeder system.-Installation of second carrier for Node B(3206, 3116).-Fiber installation – Single mode and Multimode-Fiber patching to 4G radio-Supervising of contractors for maintenance work such as air con servicing, BTS structural repair.-Carry out site surveys for new sites, site acquisition and make the material list required for deployment. -Arrangement of materials to be taken for outer island installation by “barge” or helicopter

-Load dispatch and monitoring using SCADA software-Attending electrical breakdown in the power station.-Carry out generator protection test. -Carry out battery testing for wet cell-Repair and maintenance of electrical equipment’s and machines. -Single phase and three phase wiring, calibration of meters and wiring of control panels. -Motor servicing-Record accurate readings and maintain record of engine performance, control instruments and meters, periodically as per set procedure. -Record fuel and oil consumption. -Ensure generators sets are ready for start-up/standby as per received instruction. Assist lead operators in reading/recording electricity generation and load dispatch on specified shift.-Ensure lubricating agent, fuel and cooling water tanks are at prescribed operational levels at start and during the end of each shift. Carry out cleaning of lubricating oil centrifuge.-Check operation of the plant auxiliary equipment, tank level and record required parameters.-Record fuel and oil consumption.

-Attending electrical breakdown in the power station.-Carry out generator protection test. -Carry out battery testing for wet cell-Repair and maintenance of electrical equipment’s and machines. -Single phase and three phase wiring, calibration of meters and wiring of control panels. -Motor servicing-Local area networking and PABX WIRING. -Record accurate readings and maintain record of engine performance, control instruments and meters, periodically as per set procedure. -Record fuel and oil consumption. -Ensure generators sets are ready for start-up/standby as per received instruction. Assist lead operators in reading/recording electricity generation and load dispatch on specified shift.

-Attending electrical breakdown in the power station.-Carry out generator protection test. -Carry out battery testing for wet cell-Repair and maintenance of electrical equipment’s and machines. -Single phase and three phase wiring, calibration of meters and wiring of control panels. -Motor servicing-Local area networking and PABX WIRING. -Record accurate readings and maintain record of engine performance, control instruments and meters, periodically as per set procedure. -Record fuel and oil consumption. -Ensure generators sets are ready for start-up/standby as per received instruction. Assist lead operators in reading/recording electricity generation and load dispatch on specified shift.

-Repair and calibration of Radio telephone – Tait Products (T199, T499, T500and T2000 Series), and Philips FM92, and FM1680-Repair and calibration of High frequency radio transceivers, low capacity radio links, interface cards, and switch mode rectifiers.-Radio Telephone installation in the vehicle and reprogramming of the Trunk Radio system.

-Repair and service of TV, VCR, Radio, and electrical appliance.-Installation of outdoor TV antenna.

-Repairing and servicing of TV, monitor, printer, and uninterrupted power supply (UPS). -Carry out cabling for LAN