Ashish Chandra

Ashish Chandra Email and Phone Number

Subsea Engineer @ Woodside Energy
Perth, WA, AU
Ashish Chandra's Location
Perth, Western Australia, Australia, Australia
Ashish Chandra's Contact Details

Ashish Chandra personal email

About Ashish Chandra

19 years of overall industry experienceOffshore supervision of drilling, completions, workover, intervention and abandonment operationsPlan and execute permanent well abandonment from MODU and temporary well abandonment from LWI vesselXmas tree deployment on wire and on drill pipe, from planning to execution stagePlanning and execution of LWI and XT deployment job from LWI vesselPlanning and execution of XT and Flowbase deployment job from IMR vessel, SIMOPSInstallation, operations, interfaces and troubleshooting foro FMC Riserless LWI stack on Island Performer and TMT LWI stack on Sapura Constructoro FMC, OSS, BH and Aker IWOCS (intervention workover control system)o TFMC EHXT 2.0, EHXT and EVDT systems, BH, Vertical and Horizontal Xmas Tree systems, Aker Horizontal Tree system, OSS Horizontal Tree systemo FMC, OSS, BH and Aker Tubing Hanger and Tubing Hanger Running Toolso Halliburton, Elmar and FMC wireline TH crown plugs, TH isolation sleeve, TH bore protector, running/retrieval toolso Schlumberger Sentree 7 and Senturian systemo Expro Electrohydraulic< Fast Response and Direct Hydraulic Landing String systemso BH DMS-700, MS-700 and SG-5 wellhead systems, FMC UWD-15 wellhead systemsProduct knowledge of FMC Workover riser system (EDP/LPR)Design of Subsea Production System (SPS), Factory Acceptance Test (FAT), System Integration Test (SIT), Site Receival Test (SRT) Working knowledge of API 6A / ISO 10423, ISO 13628-1, API 17D / ISO 13628-4, ISO 13628 – 5, ISO 13628 – 7, API 17H / ISO 13628-8, API-5CT, Statoil and Woodside Engineering Standards Well engineering, casing design, drill string design and hydraulics, well control equipment and procedures. Hands on experience of working offshore on drilling rig as a trainee (Roustabout, Roughneck, Asst. Driller, Asst. Subsea, Asst. Toolpusher, maintenance and marine department). Project engineering and management, Pre-FEED and FEED work, EPC and service contract management. Safety leadership for offshore and onshore operations, HAZID, HAZOP, Risk Assessment. Excellent analytical, problem solving, numerical, communications and organization skills

Ashish Chandra's Current Company Details
Woodside Energy

Woodside Energy

View
Subsea Engineer
Perth, WA, AU
Website:
woodside.com.au
Employees:
5658
Ashish Chandra Work Experience Details
  • Woodside Energy
    Subsea Engineer
    Woodside Energy
    Perth, Wa, Au
  • Woodside Energy
    Subsea Supervisor
    Woodside Energy Jan 2024 - Present
    Perth, Western Australia, Australia
    Subsea supervisor on MODU Transocean Endurance for Stybarrow 10 wells Plug and Abandonment campaign.
  • Woodside Energy
    Subsea Engineer
    Woodside Energy Apr 2023 - Present
    Perth, Western Australia, Australia
    Subsea Engineer for one well Tidepole intervention campaign using LWI vessel Sapura Constructor.Subsea Engineer for Stybarrow 10 wells plug & abandonment campaign from Transocean Endurance semi submersible rig.
  • Woodside Energy
    Subsea Wells Supervisor
    Woodside Energy May 2022 - Apr 2023
    Perth, Western Australia, Australia
    Subsea wells supervisor for shallow water development, workover and abandonment campaigns from moored Semi-Submersible Rig Ocean Apex.- One Xena Phase 2 Development well- Four wells Balnaves Plug and Abandonment campaign - Two Woodside/BHP Pyrenees Phase 4 workover wells
  • Woodside Energy
    Subsea Engineer
    Woodside Energy Sep 2019 - May 2022
    Perth, Western Australia, Australia
    Subsea Supervisor and Subsea test tree package engineer for Echo Yodel abandonment, GWF-3 development and Xena Ph2 development campaigns on rig Ocean Apex.- Subsea Supervisor for completions and abandonment campaigns on Ocean Apex - Package lead for Subsea Test Tree System supplied by Expro Group- System integration testing for Subsea Test Tree systems- Focal point for Rig Safety case deliverables from Subsea engineering view point; Identification of safety critical equipment, scope of validation, input into rig safety case revision, performance standards - ALARP demonstration for Subsea Test Tree selection for Xena 2- Subsea Test Tree and THRT interface management- Subsea test tree interfaces with E-line and Slickline vendors for abandonment and completions campaigns- Package lead for Tension Lift Frame supplied by AME- Landing string management and interfaces with Tubing Running Services vendor
  • Woodside Energy
    Subsea Engineer
    Woodside Energy Sep 2017 - Sep 2019
    Perth, Australia
    Subsea Engineer for PLA07 MODU, LWI and IMR Scopes- Supervision of Subsea work scopes on Ocean Apex for upper completions and well unload operations- Project management of PLA07 Flowbase installation from IMR vessel, planning to execution- THOJ Jigging operations on Ocean Apex in Singapore Shipyard, planning to execution- Company rep for FAT of Expro Electrohydraulic Subsea Test Tree and Riser Control Module in UK- Preparation of Subsea Guidelines and Acceptance Criteria for MODU campaign tubing hanger deployment and Expro EH landing string operations- TFMC Tubing Hanger, running tools and spares mobilisation work scopes - Upper completion subsea scope risk assessment and bowties- Design and fabrication of new TH hang off plate using ICON- Rig interfaces and modifications for Expro EH system with Ocean Apex- Supervision of XT installation, LWI operations on vessel Sapura constructorSubsea Engineer for GWF-2 MODU and LWI Scopes, Sep 2017 - Sep 2018- Offshore Supervision on LWI Vessel Island Performer for GWF-2 EVDT installation and LWI operations- Offshore Supervision on Ocean Apex for upper completions and well unload operations- Responsible for TFMC Tubing Hangers, Expro Landing String, AME tension lift frame and ROV work scopes- Technical support in the office for Ocean Apex operations- Writing guidelines and acceptance criteria for upper completions tubing hanger deployment and landing string operations- Lessons learned and After Action reviews for Ocean Apex operations- Writing guidelines and acceptance criteria for LWI and XT deployment scope- Various stage gate Assurance plans tasks for LWI and XT deployment scope- Preparations and planning for LWI SIT, deck testing and vessel Island Performer campaign - Contingency planning for MODU and LWI work scope
  • Tek-Ocean Energy Services Pty Ltd
    Subsea Engineer
    Tek-Ocean Energy Services Pty Ltd Jan 2016 - May 2016
    Perth, Australia
    Woodside Persephone Tubing Hanger and Plugs Interface testingGE/Inpex Ichthys project Tubing Hanger FAT preparation workInpex Ichthys Tubing Hanger Site Receival Test and Pre-deployment TestsRefurbishment of Pluto annulus and POG Reelers and Umbilicals owned by WoodsideUnspooling of Schlumberger SSTT umbilical from reeler used in Shell PreludeRefurbishment of Tek-Ocean owned Hitech HPU unit for rentalPreparation of CTR, quotes and project completion/handover documentsKey Responsibilities as ExxonMobil Site Representative for Kipper Tuna Subsea equipment Site Receipt Test (SRT)Review and finalisation of the SRT ProcedurePreparation and planning of the test at Vendor’s facilitySupervise subsea contractor’s technicians during SRTDaily reporting of SRT progress to ExxonMobil managementTechnical support and troubleshooting during the SRT Final sign off and approval of the test procedure / report
  • Exxonmobil
    Subsea Engineer
    Exxonmobil Feb 2012 - Feb 2015
    Melbourne, Australia
    Lead of subsea engineering work within drilling and completion department for Jansz projectStewardship of the subsea services contract with GE Oil & Gas and ROV contract with OceaneeringManaging interfaces for GE Oil & Gas and Schlumberger SSTT equipment with rig Deepwater Frontier, interfaces for Xmas tree deployment from vessel Maersk NomadWriting Xmas tree deployment procedure, IWOCS deployment procedure, Tubing Hanger running and testing procedure, Crown plugs running and testing procedure, Xmas Tree suspension testing procedure, SSTT running and testing procedureSupervising IWOCS, Tubing Hanger, SSTT and upper completions operations on Deepwater FrontierSupervision for deployment of Xmas Trees and Flowline Support bases from installation vessel Maersk NomadSupervising EFAT, SIT, SRT, pre-mobilization and pre-deployment testsof Subsea Production System equipmentFacilitating Tree Run on Paper, Complete Well on Paper, Risk Assessments for Xmas Tree Deployment, Risk Assessment for use of simplified landing string for Upper Completion land and lock operationsProcedure planning and offshore supervision for intervention operations on Jansz wellsProcedure and planning for retrieval of Horizontal Xmas Tree for workover operations on the wellOnshore technical support for Subsea Wellhead, Casing Hanger installation operations during drilling phaseDesign, procurement and testing of simplified landing string for tubing hanger land and lock operationsEPC contract management, testing and implementation of ROV based system to perform offline DHPT readings through Xmas tree using vessel Maersk Nomad ROVPlanning of Subsea intervention well kill module deployment from rig Deepwater FrontierScreening of rigs Ocean America, Ocean Apex and Ocean Monarch for flowback of Jansz wells EPC contract management fo Jansz 4 pressure monitoring well subsea equipment. Planning for Jansz 4 executionMonitoring and optimization of Subsea work scope, budget and costing
  • Fmc Technologies, Malaysia
    Lead Aftermarket Engineer (Subsea)
    Fmc Technologies, Malaysia Sep 2010 - Feb 2012
    Kuala Lumpur, Malaysia
    Lead Aftermarket Engineer (Subsea) with FMC Technologies Malaysia Aftermarket Engineering groupLead Technical Installation Engineer for BP Lan Do Vietnam Subsea Gas Development ProjectResponsible for aftermarket deliverables of the project at various stage gates of the projectInputs in designing of X-mas tree and other Subsea equipment from installation and operations perspectiveOverall coordination of Rig Book preparation task and writing Completions System Manual for BP Lan Do ProjectInstallability review of BP Lan Do Tree and Completions. Identifying and raising rig related interfaces for BP Lan Do CompletionsTechnical support for Factory Acceptance Testing and Site Integration Testing Job for BP Lan Do Subsea EquipmentOffshore installation readiness review for the projectOnshore and offshore Engineering support for Subsea Completions Installation campaign for BP Lan Do
  • Ge Oil & Gas
    Subsea Engineer
    Ge Oil & Gas Sep 2008 - Sep 2010
    Stavanger Area, Norway
    Dedicated mainly to Statoil’s Snorre B oil field aftermarket services engineering team Technical support for subsea workover and completions (vertical dual bore Xmas trees and completion workover riser system) jobs in Statoil’s Snorre B fieldTechnical Support for maintenance, repair, refurbishment and modifications of the Snorre B Subsea EquipmentFEED study for design of new umbilical, subsea distribution unit and contingency system for Snorre B field - Define and coordinate third party work scope. Propose modified SDU design, create modified P&ID, revise design basis, new connection system. Contingency system – provide parameter for hydraulic and electrical analysis, review third party analysis. Final study reportPre-FEED study for modifying Subsea Systems for installation of gas lift in Snorre B field of Statoil - Propose options for gas lift installation with layout, mark-up drawings, schematics and additional equipment from platform to Xmas tree. Propose installation sequence, installation time, production downtime estimates for various options, weight impact on platform and cost and delivery estimates. Final study report and documentationPre-FEED study for modifying Subsea Systems to increase water injection at Snorre B field of Statoil - Feasibility analysis for installation of new templates, connection of raw seawater pump to existing injection wells, connection of new injection template to raw seawater pump, subsea manifolding of water and gas injection to reduce number of risers. Final study reportTroubleshoot excessive override torques in 6-3/8” rotary actuators for master and swab valvesRoot cause analysis and recommendations to troubleshoot Xmas tree VX cavity pressure build up issue in Snorre B field of StatoilGap analysis of Workover Riser System against latest ISO standard for Tordis Vigdis field of StatoilPreparation of documentation (MRB and MDR) for Workover Riser Handling System and Pressure Retaining Tree Cap System for Snorre B field
  • Reliance
    Subsea Engineer - Drilling And Completions
    Reliance Jul 2006 - Sep 2008
    Mumbai Area, India
    Subsea Engineer in Drilling and Completions department to support Xmas tree deployment and completion operations from deepwater drill ships Deepwater Frontier and Discoverer 534Managing interfaces of Xmas Tree, Subsea Test Tree, Upper Completion equipment, Reservoir monitoring System with drilling rigs Deepwater Frontier and D534Write technical procedures for Xmas tree running using drilling rig. Assist Sr. completions engineer to write program for running upper completions from the rigCoordinate landing string analysis work carried out by Aker Schedule and planning for pre-completion tasks to carry out modifications on the rig prior to the start of operationsSupervise Xmas tree deployment from the rig. Supervising completion operations on the rigMonitoring and optimization of completion operationsProvide support to the Drilling Superintendent for well completion operationsParticipate in daily completion operations and contractors meetingsWitness and certify pressure and function test of Xmas tree, Tubing Hanger and other Sub-sea equipment both onshore and offshoreSupervise functional testing and other relevant preparatory work at shore base prior to dispatch of trees and all related equipment & tools to the offshore rigCompliance with company regulatory standards and HSE system.Assist in preparation of end of Completion, lessons learned and non-conformance reportsIdentification of Hazard and safety controls during subsea installation operations and mitigation plansPreparation of end of well and Well Handover documentationPrimary point of contact for subsea services contract with Aker and landing string contract with SchlumbergerWitness factory acceptance testing of equipment at Contractor’s facility in Norway
  • Reliance
    Drilling Engineer
    Reliance Apr 2003 - Jun 2006
    Mumbai Area, India
    As a Drilling Engineer assisted the Drilling Superintendent in planning, design and program, coordinate and monitor the well construction activities in the KG-D6 block. During operations performed the job of a Well Site Drilling Engineer, rotating between the office and the rig sites. Also worked as a night drilling supervisor on the Drill Ship Discover 534 reporting to the drilling Superintendent.Prepare the drilling program, program amendments and other documents to support operation including time, depth and cost estimates, operational procedures, regulatory reports, end of well reports and management reports etcMonitor all phases of the drilling operations, well costs and time distribution for wellsWork closely with resource teams, geologists, production and service company personnel to ensure an efficient operationPrepare technical Scope of works for the tender documents; technical evaluation of bids for Drilling rig and all drilling related servicesMobilization / de mobilization of materials and servicesParticipating in daily operations meetings with Rig and the contractors and provide technical/logistic supportWork on drilling rigs to provide technical and operational assistance to the Drilling SupervisorPrepare the daily drilling report, operations forecast and daily well costPerform post-analyses for benchmarking and learningCompleted a 62 weeks training assignments with Transocean Inc. Safety & Induction - 1 week, Drilling practices course – 1 week, Well construction course – 1 week, BOP equipment seminar – 1 week, Roustabout - 4 weeks, Roughneck - 8 weeks, Derrickman and Pumpman - 8 weeks, Assistant Subsea Engineer - 6 weeks, Assistant Driller - 8 weeks, Maintenance – 3 weeks, Marine – 1 week

Ashish Chandra Skills

Subsea Engineering Completion Drilling Petroleum Completions Petroleum Engineering Gas Offshore Drilling Onshore Upstream Deepwater Drilling Engineering Project Planning Oil/gas Reservoir Management Workover Field Development Energy Well Testing Oilfield Engineering Reservoir Engineering Oil And Gas Project Engineering Project Management Onshore Operations

Ashish Chandra Education Details

Frequently Asked Questions about Ashish Chandra

What company does Ashish Chandra work for?

Ashish Chandra works for Woodside Energy

What is Ashish Chandra's role at the current company?

Ashish Chandra's current role is Subsea Engineer.

What is Ashish Chandra's email address?

Ashish Chandra's email address is as****@****ail.com

What schools did Ashish Chandra attend?

Ashish Chandra attended Robert Gordon University, Indian Institute Of Technology (Indian School Of Mines), Dhanbad.

What skills is Ashish Chandra known for?

Ashish Chandra has skills like Subsea Engineering, Completion, Drilling, Petroleum, Completions, Petroleum Engineering, Gas, Offshore Drilling, Onshore, Upstream, Deepwater, Drilling Engineering.

Who are Ashish Chandra's colleagues?

Ashish Chandra's colleagues are Ross Rechichi, Brian Bethell, Nia Cardian, Mana Simpson, Jason Jones, Troy Sumpton, Robert Nesbit.

Not the Ashish Chandra you were looking for?

Free Chrome Extension

Find emails, phones & company data instantly

Find verified emails from LinkedIn profiles
Get direct phone numbers & mobile contacts
Access company data & employee information
Works directly on LinkedIn - no copy/paste needed
Get Chrome Extension - Free

Aero Online

Your AI prospecting assistant

Download 750 million emails and 100 million phone numbers

Access emails and phone numbers of over 750 million business users. Instantly download verified profiles using 20+ filters, including location, job title, company, function, and industry.