• Manage and oversee project quality requirements and ensure compliance to project specs., stds, policies, regulation, codes.• Prepare, review and update a PQP and monitor its implementation by the project team.and ensure contractors are complying its reqts. on site.• Coordination of expediting fabrications of steel structures and spools (big / small bores) and other relevant processes.by the contractors at the fabrication and on site.• Managing the development and implementation of the IMS-QHSE reqts.• Supervise and ensure compliance of the project with the project inspection plans, specs., drawings, procedures, MS, RAs, ITP’s, documentations templates and relevant project deliverables.and quality record submittals.• Support and ensure the project team performs, monitoring of material inspections, testings, calibration of IMTE in compliance with specified project reqts..• Support and advise, follow up ITPs of subcontractors (relevant Power Plant systems).• Supervise WQT of welders with regards to the activities assigned. • Evaluates the qualifications / certificates of third party NDT service provider.• Supports the construction roles in the management and control of subcontractors.• Coordinate the relevant Tracking Systems for correct identification of materials. • Allocates Quality Control personnel to the various areas of site activities.• Supports and perform / participate to all the internal/external audits. • Supervise / monitoring of welding activities on site and consumbles controls, specifically to dissemillar materials.• Review and support the closure of NCR's, assist the project team in investigating root causes, recommend corrective and preventive actions and verify the required actions have been taken.• Conduct quality inductions; ensure that project team has received appropriate quality trainings and understands the project quality reqts..• Manage and develop corporate and project KPI’s and prepare project quality performances.

• Manage and oversee project quality to ensure compliance to stds, policies, regulation, codes, specs. and IMS-QMS requts.• Manage and review documented informations, drawings, technical reports/submittals to clients.• Prepare, review and update a PQP and monitor its implementation by the proj. team on site.• Managing the development and implementation of the IMS-QHSE reqts..• Monitor and ensure compliance of the proj. with the proj. specific plans, contract reqts., specs., drawings, procedures, MS, RAs, ITP’s, documentations templates and relevant project deliverables on site.• Ensure the proj. team performs work and material inspections, testings, calibration of IMTE in compliance with specified reqts. on project site.• Review and support the closure of NCR's, assist the proj. team in investigating root cause of NCR's, recommend corrective and preventive actions and verify the required actions have been taken..• Support and advise the proj. team on the preparation of MS, RAs, Procedures, Plans, ITP’s, and Material Submittals.• Conduct QHSE internal, project and second party audit (IMS).• Maintain effective communication with the client on all quality related matters.• Set, monitor and revise proj. quality objectives in line with the company quality objectives.• Prepare, review and advise on Lesson Learned/QHSE Incident Alerts.• Manage and develop corporate and project KPI’s and prepare proj. quality performances. • Perform technical evaluation for the Maincontractors Bidders.• Coordinate and communicate project quality reqts. and updates to all PMs and discipline heads.• Attend proj. review meetings and proj. quality meetings.• Organize and attend system mgt. reviews.• Conduct quality inductions; ensure that proj. team has received appropriate quality trainings and understands the proj. quality reqts.• Ensure that allocation of Quality staff assigned to various construction sections.• Ensure all QC Records are maintain, kept and organized.

SUMMARY Extensive experience of more than 33 years in QA / QC / Quality Management System / TQM environment to both Construction (Power Plant Project(Power Piping/Steel Structure)/Railway-Metro-Operations & Maintenance of Pumping Stations and Manufacturing set up -.Helical Welded Pipes /Sour Gas /Water Pipeline Projects / Automotive, Parts, Stamping/ Assembly). Strong management, leadership and leader development, and decision making skills. Developed training materials and trained people. Technically equipped in welding – WQT / PWHT, NDT - PT, UT, RT, MT Level II, welding inspection. Highly trained in jigs and fixtures technology and pressed metal (stamping) quality engineering. Gained 20 years working in automotive industry. Integrated Mgt. System (IMS) Lead Auditor (Quality. Environmental, Health & Safety).

• Manage and ensure effective implementation of the (IMS) integrated management system and policies across the project by working across with all the departments and personnel involved.• Manage and support project specific audit programs; carry out internal / external audits.• Prepare and review, and update project quality plan and monitor its implementation at site.• Supervise and monitor MEP activities by contractors for compliance to project quality and contract requirements at project site.• Review and support the closure of NCR's, assist the project team in investigating root cause of NCR's, recommend corrective and preventive actions and verify the required actions have been taken.• Prepare , organize and attend system management reviews.• Conduct quality inductions; ensure that project team has received appropriate quality training and understands the project quality requirements.• Support the effective supervision of QA/QC department staff assigned to various sections and project site.• Supports the Construction Managers in dealing with the client for all the relevant quality matters.• Conduct quality inductions; ensure that project team has received appropriate quality training and und erstands the project quality requirements.• Ensure all Quality Control of Records are maintain, kept and organized.• Organize and conduct Project Quality Meetings .• Supervise and ensure compliance of the project with the project inspection plans, specifications, drawings, procedures, method statements, risk assessment, ITP’s, documentations templates and relevant project deliverables and quality record submittals.• Support the project site in establishing of Method Statements and ITPs an relevant risk assessment.

Product compliance:• Ensure the project team performs work and material inspections in compliance with specified requirements.• Monitor compliance of the project with the project specific plans, contract requirements, specifications, drawings, MS, RAs, ITP’s etc.• Review and upport the closure of NCR's, .• Ensure the project team conducts testing as per the contractual reqts.; monitor the calibration of IMTE.• Quality Documents and Records Control:• Support and advise the project team on the preparation of MS, ITP’s and Material Submittals• Prepare, review and update a PQP and monitor its implementation by the project team. Manage and ensure effective implementation of the QMS and policies across the project • Manage project specific audit programs; carry out internal.external audits• Organize and attend system management reviews Quality reporting and communication: • Attend project review meetings and project quality meetings • Maintain effective communication with the client on all quality related matters • Collect quality KPI’s and prepare project quality report • Set, monitor and revise project quality objectives in line with the HLG quality objectives. • Prepare, review and advise on Lesson Learned/Quality Bulletins/Quality Incident Alerts• Deliver quality inductions; ensure that project team has received appropriate quality training and awareness.HLG Quality Strategy: • Ensure proper allocation of Quality staff at various workplaces.O&M OF PUMPING STATIONS (ASHGHAL-PWA) - PS70 (Catch#8) - PS34 (Catch#3) - PS SW4 (Catch#29) - (QA / QC Engineer Position/Functions) • Overall responsibility is to verify the implementation of the Quality Policy on the operation and maintenance of pumping Stations through the various activities at the plant site in order to ensure the project quality objectives and deliverables are met in the contractual / statutory requirements. • Prepare Corporate Monthly reports.

• QA/QC Manager report to Site Manager and have the responsibility and authority for coordinating quality issues to main contractor. • Ensuring that all relevant inspection and testing activities are executed in accordance with the ITPs. • Conduct inspection of relevant materials and eqpts.• Establish QMS of QA/QC operation reqts.• Control welding specs. as per standard reqts in WPS and its welding consumables. • Conduct training and WQT and monitor welders’ performances. • Control and monitor relevant process of power piping and supports according to required stds. and use. • Conduct line verification checking and clear punch list prior to execute pressure testing and air blowing activities. • Confirm and control NDT compliance of pressure packages prior to testing. • Confirm and control PWHT compliance of alloy and carbon materials for power piping. • Confirm paint specification(C/S), passivation and pickling (S/S) process are in compliance to stds. procedures and consumable materials reqts. Likewise, control of painting flow direction in accordance with the required medium, per line.as per P&ID. • Manage and control QA/QC operations, manpower and conduct training as necessary. • Conduct a weekly & monthly analysis for all defects reported in different inspection stages and issue NCRs where pre-set threshold limits are exceeded in order to help to investigate root causes & need CA/PA to eliminate these causes .• Coordinate the relevant Tracking Systems for correct identification of materials. • Monitor compliance of the project with the project specific plans, contract reqts, specifications, drawings, Method Statements, risk assessments, ITP’s etc.• Control and preparation of MITPS, WPS /WQR & PQR as per applicable specification. • Handling the preparation of QMS and ensure that Quality System is established, implemented and maintained in accordance with Saudi Aramco Standard and Procedures (SCHEDULE “Q”) - ISO 9001:2008 and API SPEC Q1:2007.

QA/QC Manager report to Site Manager and have the responsibility and authority for coordinating quality issues to main contractor. • Ensuring that all relevant inspection and testing activities are executed in accordance with the ITPs. • Conduct inspection of relevant materials and eqpts.• Establish QMS of QA/QC operation reqts.• Control welding specs. as per standard reqts in WPS and its welding consumables. • Conduct training and WQT and monitor welders’ performances. • Control and monitor relevant process of power piping and supports according to required stds. and use. • Conduct line verification checking and clear punch list prior to execute pressure testing and air blowing activities. • Confirm and control NDT compliance of pressure packages prior to testing. • Confirm and control PWHT compliance of alloy and carbon materials for power piping. • Confirm paint specification(C/S), passivation and pickling (S/S) process are in compliance to stds. procedures and consumable materials reqts. Likewise, control of painting flow direction in accordance with the required medium, per line.as per P&ID. • Manage and control QA/QC operations, manpower and conduct training as necessary. • Conduct a weekly & monthly analysis for all defects reported in different inspection stages and issue NCRs where pre-set threshold limits are exceeded in order to help to investigate root causes & need CA/PA to eliminate these causes .• Coordinate the relevant Tracking Systems for correct identification of materials. • Monitor compliance of the project with the project specific plans, contract reqts, specifications, drawings, Method Statements, risk assessments, ITP’s etc.• Control and preparation of MITPS, WPS /WQR & PQR as per applicable specification. • Handling the preparation of QMS and ensure that Quality System is established, implemented and maintained in accordance with Saudi Aramco Standard and Procedures (SCHEDULE “Q”) - ISO 9001:2008 and API SPEC Q1:2007.

• QA/QC Engineer report to QA/QC Manager and have the responsibility and authority for:• Coordinating & conducting schedule & unscheduled Internal Auditing for implementation of quality procedures in all departments and issue NCR, where required and investigate all NCRs causes.• Supervise process control inspectors & conduct a statistical analysis for the process• Control parameters data against pipes defects data to detect any processes abnormalities.• Conduct a weekly & monthly analysis for all defects reported in different inspection stages and issue NCRs where pre-set threshold limits are exceeded in order to help to investigate root causes & need CA/PA to eliminate these causes• Control and preparation of MITPS, WPS /WQR & PQR as per applicable specification.• Handling the preparation of QMS and ensure that Quality System is established, implemented and maintained in accordance with Saudi Aramco Standard and Procedures - (SCHEDULE “Q”) - ISO 9001:2008 and API SPEC Q1:2007.February 2010 – May 2010 Acting QA /QC Manager / MR • The QA /QC Acting Manager reports to the General Manager. He has been given the organizational freedom, responsibility and authority to ensure that requirements of ISO 9001:2008 and API SPECS.Q1:2007 and Saudi Aramco Standards and Procedures-(Schedule “Q”) are implemented and maintained.

• The Quality Engineering / Inspection Manager plans, directs, implements and coordinates and controls the overall activities of the department in order to achieve established targets. • The position maintains, manage and controls the QMS- Quality Assurance System. Ensure suppliers’ quality audits in process and products are executed regularly. • Analyzes, evaluates and implements recommended quality improvements, which includes parts warehousing and materials handling control activities, specification changes and inspection process standards. • The position serves as window between Manufacturing and Marketing Division and business counterpart abroad (NML Japan, Yulon Taiwan, Malaysia, Thailand, Indonesia, China, and Spain) for quality issues. • Cross Functional : Management Responsibilities ; Quality Engineering; Quality Inspection; Manufacturing Coordination and other Departments. POLLUTION CONTROL OFFICER The Pollution Control Officer (PCO) attends the requirements of the establishment, its installation of pollution control facilities including application, securing necessary pollution permits and renewal thereof. Responsible for any violations of PD 984 and its implementing rules and regulations committed by the establishment where the officer is employed.

• Conduct NDT (UT-RT-PT) and Visual and Dimensional inspection to spirally welded pipes, and Hot Rolled Coils.(HRC) respectively. • Responsible in calibration of Auto-line and Manual Ultrasonic Testing Machine. • Responsible for making quality feedback to Pipe Making Section. • Conduct inspection (outside/ inside) surfaces, make judgment of different spirally welded pipes and defects and its portions, according to inspection instruction procedure (AWS/API Standards).

QUALITY CONTROL METROLOGIST  The Quality Control Metrologist (Gauge Inspector) is responsible in maintenance, care and calibration of measurements and ancillary equipment to the degree necessary for support of the operation. The position provides support to the Engineering, Production and Inspection Departments in the resolution of various measurement and gauging processes.

The Quality Control Parts Inspector (Parts Inspector) is responsible for inspection, of raw materials, pre-inspection, in process inspection, and final inspection of production parts, sub-assemblies.Making daily inspection report.