Project: AF Pre-treatment Unit at the Production Complex of Orlen s.a. in Płock (Poland) Employer: Progetto 10 for KT - Kinetics Technology, Orlen• Execution of Detailed Engineering Design• Support activities and coordination including meeting with Client for documentation finalization• Piping and equipment arrangement study and development of 3D Model through SmartPlant3D (SP3D) software.• Follow-up of Owner/Licensor/KT comments• Vendor DWGs comments for vessel (nozzle orientation, supports, supports loads, platform design, …), machinery, packages, instrumentation dwgs, etc.• Piping MTO• PIDs comments• Revise documents according to Authorities/Contractor comments/notes/clarifications

Project: Brindisi - Installation of a new electric boiler systemEmployer: PROGETTO 10 S.c.r.l. (Rome, Italy) as API Engineering and Consulting for Enel Green PowerLocation: C.le Enel di Brindisi Sud Federico II• Multidisciplinary technical coordination and Design Plan Program execution and management.• Primary technical point of contact for the client.• Design, Development and issuance of whole documentation valid for construction for the connection of a new Electric Super-heated Steam Generator Station composed by Electric Steam Boiler with a total capacity of 6 t/h to be integrated in the existing power plant.• Surveillance of the technical documentation developed by the suppliers.• Isometric sketches extraction from 3D Model• Drawings for pipe’s supports• Drawings for structures/foundations/pits/buildings/etc.• Coordination with Construction dept.

Project: Papua LNG ProjectEmployer: Progetto 10 for Technip Energies directly at the headquarters in Rome• Major Piping Layout for Competitive front end engineering design (FEED) for the central process facility and well pads• Feasibility studies

Project: Termoli Thermoelectric Power PlantEmployer: PROGETTO 10 S.c.r.l. (Rome, Italy) for Metaenergia produzione S.r.l.Location: Termoli (CB) - Italy• Multidisciplinary technical coordination and Design Plan Program execution and management.• Primary technical point of contact for the client.• Design, Development and issuance of whole documentation valid for construction of a new: - Wastewater treatment system to be integrated in the existing power plant and related installation of new Submersible electric pumps and Externally Fed Rotary Drum Screen. - Firefighting system to be integrated in the existing power plant and related installation of a new fire water storage tank and a pumps package. - Connection line from the methane gas reduction unit to the engine room and predisposition for connection to the cylinder trailer.• Field surveys and tie-ins point identification.

Project: Brindisi - Installation of a new electric boiler systemEmployer: PROGETTO 10 S.c.r.l. (Rome, Italy) as API Engineering and Consulting, for Enel Global GenerationLocation: C.le Enel di Brindisi Sud Federico IIActivities:• Multidisciplinary technical coordination and Design Plan Program execution and management.• Primary technical point of contact for the client.• Field surveys and tie-ins point identification.• Design, Development and issuance of documentation for tender of a new Electric Super-heated Steam Generator Station composed by Electric Steam Boiler with a total capacity of 6 t/h to be integrated in the existing power plant.• Preparation of tender specifications (technical specifications, bill of quantities ed related attachments).• Collaboration for the technical alignment of the new electric boiler order.

Project: Luanda Refinery - Gasoline Production IncreaseEmployer: Progetto 10 for KT - Kinetics Technology, EniLocation: Luanda - AngolaActivities: • Development of Piping engineering activities for new Combined Cycle Plant, Deethanizer, LPG lines and Tank farm Projects.• Piping and equipment arrangement study and development of Piping 3D Model through SmartPlant3D (SP3D) software.• Daily interface and collaboration with client and other disciplines involved in the project.• Implementation of detail design modifications due to new revisions of P&ID, Piping classes and/or client's requirements.• Flow check• Development, managing and issuance of Isometric drawings and related bills of material sketch list.• Piping Plot Plants extraction and setting-up

Project: E.P.C. for the FAO pumping station Al Faw - Basrah, IraqEmployer: Progetto 10 for PEG - State Company for Oil Projects (SCOP), RuhrpumpenLocation: IraqActivities: Piping project coordinator for As built issuance• Direct interface with the client for the scope of work definition• Coordination with engineering and construction departments• Updating of As-Built changes of all pipelines of the project into 3D Model through AVEVA Everything3D (E3D) software.• Development and issuance of Isometric drawings and related bills of material in the final As-Built revision.

Project: Heating Station Facilities between PS#6 & MT for melut basin oil development project (downstream)Employer: Progetto 10 for PEG, APS Engineering Company, Petrodar Operating CompanyLocation: Republic of SudanActivities: • Study for the identification of a new by-pass to be installed upstream & downstream of the block valves BV25- and BV25-2 to allow te construction of an additional heating station without any shutdown.• Development of Piping Material Take Off (MTO) based on the piping and equipment arrangement study, in collaboration with the civil end electrical dpt., for the definition phase of the project.

Project: Abu Dhabi Polymers Company Limited - Petrochemicals ProjectEmployer: Progetto 10 for Technip Energies, NesteLocation: Ruwais - U.A.EActivities: Development of Piping Material Take Off (MTO) based on the piping and equipment arrangement study, for the definition phase of the project.

Project: Rotterdam Capacity Growth RDCG Project - RefineryEmployer: Progetto 10 for Technip Energies, NesteLocation: Rotterdam - HolandActivities: Development of Piping Material Take Off (MTO) based on the piping and equipment arrangement study, for the definition phase of the project.

Singapore Expansion Project - NExBTL• Piping design and feasibility studies of Hydrotrating system for BioLPG production using the software SmartPlant 3D.• Implementation of detail design modifications due to new revisions of P&ID, Piping classes, Piping/Instrument assembly standard and/or client's requirements.• Line list management and follow-up 3D model progress.• Interface and collaboration with stress analysis and support discipline.• Isometric drawing extraction with related bill of material sketch list.• Pipeline spooling.• Piping plants extraction and setting-up with relative sections and views divided by areas.

Mochovce, Slovakia - 880 MW Nuclear Power Plant Units 3&4 (directly on construction site) • Multidisciplinary technical coordination of technological subcontractor Enseco a.s. for Engineering Procurement and Construction of safety systems in the Nuclear Power Plant. • Primary technical point of contact for the consumer.• Liaison between the project manager and the technical disciplines involved in the project.• Conducting of quality control over the work done by the technical team.• Final validation of engineering documents submitted by the supplier and verified by the relevant supervisors and Head of Units.• Validation, upon PM request, of provided quotations for ‘’extra work orders’’ claimed by the contractor Enseco, technically and commercially in terms of hours to complete the engineering costs, and following participation in the commercial meetings with the supplier.• Cooperation in the development of Detail Design Modification (DDM) and related monitoring of its implementation in the design documentation.• Elaboration with the Senior PE of Purchase Technical Specification and Technical Variation for contract amendment.• Ensuring that all the identified Non Conformity and the Design Changes managed with the different tools (e.g. DDMs, EFDs) are implemented in the relevant documents to be Hand-Overed to the Commissioning for the execution of non-active testing (Cold Hydro, Hot Hydro, ...) after the Construction phase and the completion of individual tests.• Ensuring that the As Built documents are issued according to the defined rules and schedules to achieve the relevant milestones (Fuel Loading, ..) for the execution of Commissioning active testing and Hand-Over to Technical Operation.

Mochovce,Slovakia - 880 MW Nuclear Power Plant Units 3&4 (directly on construction site)• Management and resolution of EFD (Engineering Field Disposition) for completion of Units 3&4 of Nuclear Island and Auxiliary Building, submitted by Contractors or initiated by STO concerning modifications on approved Detail Design in order to solve the not constructability issues, due to collisions or external constraints, which can stop the erection. • Clash Resolution and feasibility's studies performed through site survey and implementation in the 3D Model ‘’Aveva PDMS’’ of pipes, supports and structures impacted by the EFDs, with Interfacing and coordination between Contractors, Engineering and Construction dpt..• Assessment and review of NCR (Non Conformity Report) through involvement and cooperation of various disciplines.• Cooperation in the development of Technical Specification for 3D Model management and follow-up its implementation after the design freezing of NI-U4.• Evaluation and estimation of ‘’extra work orders’’ claimed by Contractor Enseco for engineering hours to be assigned for the modification included on EFD. • Troubleshooting concerning ‘’Operation Finding’’ to allow the maintenance and dismantling of valve’s actuators and guarantee a safety escape routes in the Steam Generator’s room.• Verification and resolution of clearances and potential collisions between installed pipes, equipment and structures affected by Thermal Expansion and Seismic Interaction.• Resolution of discrepancies of installed plates and penetrations, handed over via the Geodetic Survey, not realized according to contractor's requirements.• Resolution of EFDs for Conventional Island U4, through 3D Model and Site Survey for issuing of official revision of Isometrics and Supports drawings to be modified.• Development of Layout drawing and Instructions for transportation and handling of I&C cabinets from Turbine hall to the Control Room in the Conventional Island of MO34.

Mochovce, Slovakia - 880 MW Nuclear Power Plant Unit 3 (directly on construction site)• Supervisor of documentation issued for construction (FCFC) by EPC contractors Škoda JS a.s., Enseco a.s. and Vuje a.s. for completion of Unit 3. • Cross Check between Civil Inputs and Isometric Drawings for the realization of whole the support’s Plates, Anchoring Points and Penetrations to be installed in the Nuclear Island Unit 3.• Interfacing with external suppliers and internal resources of the power plant. Resolution of clashes arose after design freezing through the 3D Model ‘’Aveva PDMS’’ for the nuclear island Unit 3.

Employer: PROGETTO 10 Scrl for INFRASTRUTTURE & GESTIONI SPALocation: Biomass power plant (20MW), Dittaino (Enna, Italy) • Piping and layout design, 3D Model activities with Bentley AutoPLANT, Drawer P&ID.

Employer: PROGETTO 10 Scrl for ENEL S.p.ALocation: Coal Power Plant (1980MW) Torrevaldaliga Nord, Civitavecchia (Rome, Italy)• Drawer for piping and supports and updating of as-built with 3D Model Bentley AutoPLANT.

Collaboration and supporting to the senior engineer and surveyor of technical office. AutoCad designer: layout, plants, sections, civil details, perspective drawing, structures, etc.. Contact management. Building design. Technical report. Drafting of projects for declaration of starting of erection activities (DIA). Achievement of building permits by the authorized institutions. Architectural design for new constructions. Design and release of certifications of water system, plumbing and sewerage systems. Complete drafting of documentation to the real estate registry office of buildings, splitting lands. Drafting of bill of quantities. Docfa. Measurements and surveys of buildings and lands by using theodolite station. Preliminary expert estimate for buildings restoration.