Awdhesh Kumar Email & Phone Number

Pune, Maharashtra, India

India

Dubai, United Arab Emirates

Project: Separation And Compressor Centre (CSC) At South, Hassi Messaoud (Client SONATRACH): USD 1.2 Billion. (June. 2017 to till date) Position: Process Deputy LeadActivities: The key responsibilities of the position are: ITB Review, consistency and concurrency check with ITB documents. Design Basis, Design Criteria, Safeguarding, Flare & Blowdown Philosophy, Hydraulics, Vessel Sizing, Utility Summary, Development of Mass and Energy Balances (Pipesim and HYSYS), P&IDs, PFD, Equipment sizing, Hydraulic calculations, Control Philosophy, Cause & Effect, Specification of instrumentation and control systems and the preparation of data sheets, Chemical Injection Package, Pig launcher / receiver Datasheet, Collection Tanks, Pipeline P&IDs, PFD etc..Review of engineering design packages and deliverables and ensure & update & awareness to subordinate about the technical aspects. Revaluate & check the operations to improve the plant capacity with techno-economically.Conduct and Participate in various meetings, both with Customer and Internal meetings with Process Coordinators and Project Manager to review, check the accuracy and validity of process Data, vendor’s Package datasheets, specifications and calculations for eparator, TV/IA/PA Compressor Packages, Heater Package, Waste / Effluent water/ Produced / Raw water Treatment Package, Domestic waste water treatment package, Dew Point Control System, Flare Package, Chemical Injection package etc), Basic & Detail Engineering Scope of activities for a process unit. Prepare Scope of Work (SOW), Schedule and Estimation of Man-hour.

Project: KOC-GC-31 (Gathering Centre) (Approx. USD 850 million) Position: Process Dy. LeadType of Project: Detail Engineering (Oil and Gas-Onshore) (FEED-AMEC Foster wheeler) (Oil and Gas-Onshore)Project: RUMAITHA-SHANAYEL PHASE III DEVELOPMENT (ADCO PROJECT) North East Bab (NEB) Fileds (Approx. USD 550 million) Position: Principal Process EngineerType of Project: Detail Engineering (Oil and Gas-Onshore), (FEED-Technip) (Oil and Gas-Onshore)Project: AL DABB’IYA ASR GAS DEVELOPMENT (ADCO PROJECT) North East Bab (NEB) Fileds Position: Principal Process EngineerType of Project: Proposal Engineering (Oil and Gas-Onshore), (FEED-Technip) (Oil and Gas-Onshore / Offshore)Wells and Clusters (Oil Production Wells, Water alternating Gas (WAG) injection wells, Water Injection (WI) Separators, Desalters, Tank Vapour Gas Compressor Packages, Instrument and Plant Air compressor package, Tanks, Heater Package, Effluent water treatment package, Brackish water, potable water Treatment Package, HP and LP Flare Package, Chemical Injection package, Auto sampler, Pipelines and transportation network system, Transient / Dynamic and Surge Analysis, Other Utilities. (Corrosive system 2-6 Mole % H2S). Wells, Effluent water treatment package, potable water Treatment Package, MPFM, Pipelines and transportation network system, Pig launcher and receivers, Pressure reducing skid (max. Corrosive system 3.2 Mole % H2S and CO2 10 mole %).

Gurgaon, India

Project: AEGEAN REFINEY PROJECT (STAR), TURKEY.Position: Process Area Lead- NHT/KHT Units (At Present: SEOUL-KOREA)Activities: The key responsibilities of the position are: ITB Review, consistency and concurrency check with ITB documents & Early Work Activities (Line & Hydraulics Sizing, IFR PFD & P&ID’s formation, Datasheets formation etc).Project: Rabigh Phase-II Petrochemicals Project, Rabigh, Saudi ArabiaPosition: Area Process Lead- Metathesis & Co-ordination for MMA & MTBE Units.Activities: The key responsibilities of the position are: Feed verification, consistency and concurrency check with the interconnecting units, Development of Equipment and instrument datasheets along with auxiliary and utility systems presents in the unit. Generate PFD, MSD, P&ID, based on ITB, Line & Equipment List, Hydraulics calculation for Pumps and lines, Vendor Print Check & 30% Model Review for MMA, MTBE & Metathesis Unit.

Gurgaon, India

Project: RAPP 7 & 8, BARC, India Nuclear Project for NPCIL & BARCPosition: Lead (Process, Utility)Activities: The key responsibilities of the position are: Lead for utility area (Service water & utility service water) to do the line sizing & hydraulics with Excel sheets & Pipenet Software.

Gurgaon, India

• Experience in the development of Mass and Energy Balances, P&IDs, equipment sizing, hydraulic calculations, Control Philosophy, Operating Manual, Cause & Effect, specification of instrumentation and control systems and the preparation of data sheets.• Heat Exchanger design with HTRI, HTFS, CAS. • Relief design case development and relief device sizing. • Experience in HAZOP & 3D Model Review.• Good understanding of Process Systems, safety and environment.• Conduct and Participate in various meetings, both with Customer and Internal meetings with Process Coordinators and Project Manager to review, check the accuracy and validity of process Data, finalize the Basic & Detail Engineering Scope of activities for a process unit.

Pune Area, India

Responsible for Preparation of Proposal & Man Hours Calculation, Hysys, VimG, Mimic Simulation, Material & Heat Balance, Heat exchanger design, Pumps hydraulic calculations, P&ID, PFD & MSD Study, Preparation of “Cause and effect/Trip logic diagram”, Control Philosophy & High level operating manual Study, Formation of DFS & Control Narrative of the plants, DCS Graphics Process Simulation, FAT, SAT & Instructor Manual formation, Startup & Shutdown Sequence, Created vendor and equipment database for various offshore & Onshore equipments.

Pune Area, India

Heat exchanger design: selection of type of exchanger (HTRI), decide the fluid to be passed for shell/tube side, Tube geometry, tube passes, shell passes, baffle arrangement, baffle cut adjustment, vibration check, Utilizing the available pressure drop for maximizing the heat transfer coefficient. Heat exchanger design: Selection & Design of exchanger’s Plate Type (CAS), Block Type (HTRI), utilizing the available pressure drop for maximizing the heat transfer coefficient based on the Techno economy, datasheets, offer & order formation for Heat Exchangers.Columns & bellows component documents preparation, , Columns specification review, system (HCl Synthesis unit), datasheets & offer for their clients for Oil & Gas & corrosive media fluids like (HCl, H2SO4, Phosphoric acid, acetic acid, ECH, VCM, H2S, caustic soda, chlorides, amines, fatty acid, HF, anhydrides etc.).Project up gradation, presentation & Technical discussion with clients, Interdisciplinary Co-ordination, Arrange Project Inputs, Preparation of Project reports, carrying out Interdisciplinary checks, Preparation of Minutes of Meeting & Progress reports. Pumps hydraulics: NPSH requirement, shut-off pressure, detailed pressure drop for whole circuitVessel sizing: Demister factor, entrainment allowance, L/D For vessel, inlet/outlet nozzle size calculation, type of head & residence time fixing, Heat & Mass balance, FEED Verification.Conduct and Participate in various meeting, both with customer and internal meeting with Process Coordinators and Project manager to review, check the accuracy and validity of process data, finalize the Engineering design and scope of activities for a process unit.

Mumbai, India

Worked as Executive Engineer, Work involved Production and Quality & Process contro.

Master'S Degree (2005-2007), Material Science And Technology, 9

Activities and Societies: Renewable Energy: Solid oxide Fuel Cell at Central Glass and Ceramic Research Institute (CGCRI)-Kolkata.

B.E., Chemical