Basil Eze Email & Phone Number

Port Harcourt, Rv, Ng

Nigeria

I worked on Obiafu 41, 42, 43, 44ST & 44ST02 wells in Nigeria for AGIP (ENI) Nigeria using Victus. • I performed all MPD operations at rig site from technical, operations, and safety standpoint • I monitored wells using complete secure drilling equipment, and performed fingerprinting prior to commencement. • I modified and generated piping and instrumentation diagrams (P&ID) for ongoing projects. • I partook in installation, operation and maintenance of equipment on location. • Assisted in Analyzing and resolving mechanical, electronic and IT based issues on location. • I undertook checks and inventory of all MPD related materials prior to and after every job. • I maintained, serviced, pressure tested, function tested, and troubleshoot all MPD equipment and instrumentations prior to mobilization for work. • I followed all applicable HSE policies at the project sites and at Weatherford Base as per standard procedure

Nigeria

•Interfaced, supervise and ensure compliance to SPDC standards on pipelines protection while carrying out drainage and road crossing across SPDC ROW by third party organization•Conducted periodic review of Pipeline/Flowline Integrity Management System (PIMS/FIMS) using quality data from field operations to ascertain the integrity and capacity of pipelines and flowlines and recommend possible repair or replacement•Conducted periodic Maximum Allowable Operating Pressure (MAOP) audit verification of Oil and Gas delivery lines to confirm trip settings (High and Low pump pressures) compliance at Oil and Gas production/flow stations•Carryout inspection of Ground bed Anode, Transformer Rectifier (TR), Junction Boxes, Sacrificial Anode, and Test Posts installations and connection to underground SPDC pipes (structures) for Cathodic Protection (CP) against corrosion•Conducted pipeline/flowline integrity checks using Cathodic Protection (CP) survey, on SPDC flowlines and pipelines•Conducted pipeline/flowline integrity checks using Long Range Ultra Sonic Technique (UT1 & UT2) for SPDC lines thickness verification and magnetic particle inspection•Carryout inspection of Routine and Intelligent Pigging (IP) operations of SPDC pipelines lines•Carryout inspection of Water sampling and chemical injection of SPDC delivery lines at manifolds and flow stations respectively•Conducted pre job reviews with third party contractors in the office and on work site covering Scope of job, Work method statement, As built Drawing review, Job hazard analyses (JHA), Personnel and equipment competency certification, prior to issuance of Permit to work (PTW)•Opening of Permit to work (PTW) at the commencement of job and closing same at the close of job on the site•Ensured total compliance to SPDC Life-Saving and Golden rules at the site and reported any unsafe act/condition using SPDC UA/UC channel.

Port Harcourt, Rivers, Nigeria

Experience in real time generation and monitoring of geological and engineering Data (Gas, WOB, ROP, SPP, Torque, RPM, Swab/Surge, Overpull, Pore Pressure, Depth, Pit volumes, Mud pump counter, etc) at the well site using relevant sensors and software, and submittingboth unedited real time( via wits ) and edited data to the client as at when due. • Assessment of drilling information for Overpressure predictions using drilling (ROP, WOB, DExponent, etc) and Geological data (Gas, cutting size / shape, shale Density, etc). • Interpret events and the conditions under which they occurred so as to propose possible solutions. • Monitor tasks in a safe, timely and accurate manner in order to assist in the efficient completion of exploration and development wells for oil and gas. • Provided needed information and Data to the Well site Geologist and the Drilling Supervisor (company man). • Troubleshoot, maintain and repair mud logging equipment and sensors to ensure smooth running of operations. • Hydrocarbon gas detection and evaluation using the necessary equipment and software. • Production of daily and final well reports with detailed master logs, gas logs, pressure logs, drilling parameters logs, and time based logs. • Well correlation and interpretation using mud logs, gas logs, LWD logs and MWD logs. • Supervise the sample catchers and mud loggers to ensure the quality of services delivered to the client. • QC of final well reports, Data and logs and timely submission of same to clients. • Ensure full crew participation in all HSE activities and report same to office. • Prepare and submit timely client appraisals and job tickets to office. • Ensure the availability of crew and coordinate crew changes on time with the office. • Maintain effective communication with the client, drilling crew and other service personnel. Also participate in daily and safety meetings in the field. • Perform and supervise rig-up and rig-down operations in both on/offshore.

Sub Sahara Africa

• Equipment/tools preparation in accordance with work instructions, and load out same to meet call-off dates 90% of the time.• Ability to rig-up and rig down of surface sensors, equipment and unit• Proper testing of all L/MWD tools and equipment before, during and after each job.• Ability to ensure that BHA’s are assembled as planned including correct make-up torques for different tool sizes, doping and handling.• Troubleshoot and address all operational problems that occur within an 12-hour shift to prevent or minimize service impact.• Acquisition of high quality Data for geo-steering, drilling optimization and formation evaluation using Directional Gamma, Triple-Combo and Penta-Combo-Directional, Gamma, Resistivity, Neutron, Density, Sonic, RSS and PP tools.• Provision of services like log generation and Quality Control (QC) of Data to client's satisfaction at all times. • Strict compliance to QHSE requirements at the well site and in the base.• Preparation of documentation reports including operations reports, end of well reports and formal client data delivery.• Technical consultation such as mud hydraulics, Bottom Hole Assembly (BHA) planning, pore pressure analyses, BHA dynamics, formation evaluation, the mud system and drilling tendencies.• Ability to relate well with Directional driller (DD) to ensure BHA compatibility and planned operating parameters are within specification and correct tool face references are applied as it relates to surveying.• Submission of accurate daily cost for services where required.• Ensure that all unit reports are kept up to date such as final well reports, shift & crew change hand over report, equipment failure report and any other reports as required by management leader• Ensured Service ticket is signed on time and Sent to base for revenue recognition. Also ensure entry of all field jobs in WPTS within 5 days after completion of each job.

Sub Saharan Africa

•Supervised Formation Evaluation contractors (Mud Logging Geologists, MWD Logging Engineers, Wireline Logging Engineers, Coring and Well Testing Personnel).•Supervised and facilitated Logistics concerning the formation evaluation contractors and their equipment.•Formation evaluation while drilling and completion of oil wells through mud logging operations.•Experience in real time generation and monitoring of geological and engineering data (gas, wob, rop, spp, torque, rpm, swab/surge, overpull, pore pressure, depth, pit volumes, mud pump counter, etc) at the well site using necessary softwares, and submitting both unedited real time( via wits ) and edited data to the client as at when due.•Assessment of drilling information for overpressure indications, using drilling (rop, wob, d-exponent, etc) and geological data (gas, cutting size / shape, shale densit, etc).•Monitor tasks in a safe, timely and accurate manner in order to assist in the efficient completion of exploration and development wells for oil and gas.•Assist and provide needed information and data to the Well site Geologist and the Drilling Supervisor (company man).•Production of daily and final well reports with detailed master logs, gas logs, pressure logs, drilling parameters logs, and time based logs.•Well correlation and interpretation using mud logs, gas logs, lwd logs and mwd logs.•Supervise the sample catchers and mud loggers to ensure the quality of services delivered to the client.•QC of final well reports and logs and timely submission of same to clients.•Ensure full crew participation in all HSE activities and report same to office.•Ensure the availability of crew and coordinate crew changes on time with the office.•Maintain effective communication with the client, mud logging crew, drilling crew and other service personnel. Also participate in daily and emergency meetings in the field.

Port Harcourt, Rivers, Nigeria

• Real time generation and monitoring of geological and engineering Data (Gas, WOB, ROP, SPP, Torque, RPM, Swab/Surge, Overpull, Pore Pressure, Depth, Pit volumes, Mud pump counter, etc) at the well site using relevant sensors and software • Analyzed drilled and core sample rocks for type, size, sorting, etc and interpret Formation based on the rock properties.• Supervised junior personnel to ensure the quality of services delivered to the client.• QC the sample packing manifest prior to delivery to client.• Troubleshoot, maintained and repair equipment and sensors.• Production of daily and final well reports with detailed master logs.• Lithology interpretation and correlation of logs using gas log, LWD and MWD logs.• Performed Cuttings Carbonate Calcimetry Analyses.• Hydrocarbon detection in samples using qualitative and quantitative fluorescence technique.• Participated in all HSE activities.