Senior Lead Pvs Engineer
Current
Aug 2021 - Present
AeroLeads people directory · profile
Bert Wang, Pe Email & Phone Number
Lead Mechanical/Piping & Stress Engineer at Plant Process Equipment, Inc.
at
NASA Goddard Space Flight Center
1 work email found
@nasa.gov
LinkedIn matched
✓ Verified Jun 2026
4 data sources
Profile completeness 100%
Current company
Role
Lead Mechanical/Piping & Stress Engineer at Plant Process Equipment, Inc.
Location
Houston, Texas, United States
Who is Bert Wang, Pe? Overview
A concise factual answer block for searchers comparing this professional profile.
Quick answer
Bert Wang, Pe is listed as Lead Mechanical/Piping & Stress Engineer at Plant Process Equipment, Inc. at NASA Goddard Space Flight Center, based in Houston, Texas, United States. AeroLeads shows a work email signal at nasa.gov and a matched LinkedIn profile for Bert Wang, Pe.
Bert Wang, Pe previously worked as Senior Lead PVS Engineer at Nasa Goddard Space Flight Center and Senior System/Piping & Stress Engineer at Tesla. Bert Wang, Pe holds Bachelor’S Degree, Mechanical Engineering from Mcneese State University.
Company email context
Email format at NASA Goddard Space Flight Center
This section adds company-level context without repeating Bert Wang, Pe's masked contact details.
*@nasa.gov
68% confidence
AeroLeads found 1 current-domain work email signal for Bert Wang, Pe. Compare company email patterns before reaching out.
Profile bio
About Bert Wang, Pe
My experience with KBR, Inc. entailed being member of the piping mechanical group. I worked on new and revamp projects related to refinery & chemical and fertilizer industry. I analyzed conceptual plant layout at planning stage, and performed plant walk at completion. Experience includes piping stress analysis on power, LNG, ammonia, refining, bio-fuels, petrochemicals, fuel-transportation, pipeline, onshore exploration, and offshore topside facilities, etc. above and underground piping. I am experienced and skilled in Caesar II, Nozzle Pro, FE Pipe, PDS, PSUP, Smart Plant, PDMS, Navisworks, Microstation, AutoCAD, etc.• Coordination / Supervision / Interfacing with projects and various disciplines.• Prepare pipe support standards, critical line list, and job highlights for project use.• Perform wind and seismic calculation per design requirements using UBC, IBC, and ASCE code.• Feasibility study and stress review of critical piping.• Flexibility analysis of KBR PEQ includes close coupled PEQ and associated piping, propose pipe routings, make deliverables including design requirements, nozzle loads for vendor and DEC/DDC use.• Analysis of AIV, FIV, RV, PSV, slug flow, refractory, water jacket, and non-metallic piping systems. • Design or specify pipe supports including variables and constants, snubbers, struts, expansion joints, etc. Develop SP Items. Issue TREQs, review and evaluate vendor data. Respond to RFI from site or client.• Stress analysis of high temperature piping, cryogenic piping, and critical piping systems connected to turbines, pumps, compressors, exchangers, pressure vessels, columns, boilers, drums, reactors, heaters, air coolers, tanks, HRSG, PQE, SQE, TLE, reformers, furnaces, etc. per ASME B31.1, B31.3, B31.4, and B31.8. Various calculations per ASME Section VIII Div. 1, etc.• Qualify equipment nozzles using WRC 107, WRC 297, API, and NEMA, etc. • Conduct flange leakage checks and fatigue analysis.• Project control and MTO.
Listed skills include Epc, Engineering, Piping, Petrochemical, and 46 others.
Current workplace
Bert Wang, Pe's current company
Company context helps verify the profile and gives searchers a useful next step.
13 roles · 20 years
Bert Wang, Pe work experience
A career timeline built from the work history available for this profile.
Senior System/Piping & Stress Engineer
May 2021 - Aug 2021
Lead Mechanical/Piping & Stress Engineer
- Served as Lead and SME, responsible for static equipment design per ASME Section VIII Div. 1 & 2 code and API standards, piping material specification, piping stress analysis, pipe support design per ASME B31.3, etc.
- Performed code calculations of fixed equipment including pressure vessels, heat exchangers, furnace, boilers, heaters, and air coolers, etc. using Compress, PV Elite, CodeCalc, HTRI, Aspen EDR, etc. for equipment.
- Performed detailed equipment design 3-D modeling using Inventor, and FEA using Ansys, etc.
- Performed and checked pipe stress analysis, pipe material specification, and technical requisition of engineered pipe supports for plant design using CAESAR II, Nozzle Pro, FE-Pipe, Navisworks, etc.
- Approved and seal/stamped engineering deliverables.
Jan 2020 - Aug 2021
Engineering Supervisor
Zdjv (Usgc Ii Petrochemical Feed Project – Pe Units)
- Served as SME, responsible for supporting engineering office in Seoul, South Korea on technical clarification, design review, vendor prints, material requisition, field engineering, and trouble shooting.
- Apply engineering code, plant design rule, and industry practice.
- Approve and seal/stamp engineering deliverables.
Jan 2020 - Jun 2020
Senior Consulting Engineer
- Performed Piping Engineering for Houston Engineering Operations; backup for Baton Rouge and New Orleans Operations
- Served as SME and Lead Piping & Mechanical Engineer, responsible for engineering in compliance with codes and standards.
- Developed various specifications, standards, data sheets, guidelines, reports, and deliverables, etc.
- Interacted between offices, and interfaced with various disciplines. Performed and checked various calculations and engineering designs using CAESAR II, AutoPIPE, Nozzle Pro, FE-Pipe, Compress, etc., and provided.
- Performed technical and engineering requisition and vendor review, etc. Participated in Estimates and Proposals.
- Approved and seal/stamped engineering deliverables. Served as Lead for Project Execution.
May 2019 - Dec 2019
Senior Lead Piping & Pipeline Stress Engineer
Served as Lead and SME, responsible for working procedures and desktop manual for piping engineering. Develop Pipe Stress Specification, Pipe Support Standards, project guidelines, job highlights, and deliverables including stress reports, nozzle load tables, engineered pipe supports and specialty item data sheets, etc. Perform engineering and model.
Feb 2018 - Apr 2019
Project Engineer / Lead Piping Mechanical Engineer
- Perform review of commercial requirements and technical specifications for acceptance of PO and RFQ.
- Respond to bid documents, and raise RFI. Obtain and prepare vendor documents required for project submission.
- Coordinate between client, engineers, design group, production, and quality control, resolving issues and conflicts.
- Perform feasibility study, piping stress analysis, and stress review of Caesar II calculations for code compliance.
- Proposed pipe routings, verify the interference in 3-D Plant Model, and check 2-D drawings for all conformance.
- Specify and design pipe supports including hot & cold shoes, constant and variable spring supports, sway struts, snubbers, etc.
May 2016 - Dec 2017
Senior Piping Mechanical/Stress Engineer
- Career Highlights:
- CFCL1 & 2 Cold Shell Converter Addition Project – Gadepan, India (2015 - 2016)
- Dupont Lannate Unit - Safety Assessment, La Port Plant – La Port, Texas (2016)
- Marathon RDU Revamp Project – MPC Galveston Refinery – Texas City, Texas (2015 – 2016)
- ExxonMobil Exploration Chad Development Projects (2013 – 2016)
- Marshalltown Combined Cycle Power Generation Project – 600 MW Power Generation Plant – Marshalltown, Iowa (2015)
Jan 2013 - Feb 2016
Piping Stress Engineer
- Career Highlights:
- UFN III Ammonia / Urea BED TECH – Petrobras – Brazil (2010)
- Proman Gesellschaft für Projektmanagement mbH - CNC Replacement KAAP Converter Installation - Point Lisas, Trinidad & Tobago (2011 – 2012)
- CNC & N2K Ammonia Plants - Various Replacement Debottleneck, Stabilization and Upgrade Projects – Trinidad & Tobago (2012 – 2013)
- Chevron North America Exploration and Production Company – Big foot Project – Walker Ridge Block 29 ( 2012)
- NOVA Chemicals – NGL Cracker Revamp Project – Corunna, Canada (2011 – 2012)
Oct 2007 - Dec 2012
Project Engineer
- Prepare bids that includes cost estimating, scheduling, responding to bid documents.
- Perform stress analysis of piping, engineering and design of pipe supports, selection of spring hangers and constants, and inline and ancillary load relief components against isometrics, GA and steel structure drawings.
- Create and maintain project databases and websites for client and design group.
- Transmit engineering data and drawings through project net.
- Coordinate between client, client engineers, design group, and production, resolving issues and conflicts.
- Perform calculations as needed to determine steel requirements.
2006 - 2007
~1 yr
Design Engineer
- Designed and drafted of metal seated power ball valve according to ASME code using AutoCad
- Verified drawings for accuracy
- Provided manufacturing support
Jan 2003 - Apr 2005
Mechanical Engineer
- Designed and drafted pressure vessel components using engineering software, including AutoCad
- Performed engineering calculations using various computer languages and prepared quotations and drawings for manufacture per customer’s specifications
- Developed custom engineering design and drafting per ASME code and ANSI, ASME, MSS, API, ASTM, etc. standards
- Reviewed contract, and verified drawings for accuracy
- Troubleshot shop problems and provided manufacture support
Jul 1997 - Oct 2000
Plant Engineer
- Planned, designed, and coordinated the integration of machinery.
- Provided technical support for any system malfunctions.
- Procured equipments and supply parts, and established maintenance and service schedules
- Started the plant at a new location
- Coordinated, integrated and oversaw installation of equipments and machinery
- Performed tests according to specifications
Jul 1996 - Jul 1997
1 education record
Bert Wang, Pe education
-
Mcneese State University
FAQ
Frequently asked questions about Bert Wang, Pe
Quick answers generated from the profile data available on this page.
What company does Bert Wang, Pe work for?
Bert Wang, Pe works for NASA Goddard Space Flight Center.
What is Bert Wang, Pe's role at NASA Goddard Space Flight Center?
Bert Wang, Pe is listed as Lead Mechanical/Piping & Stress Engineer at Plant Process Equipment, Inc. at NASA Goddard Space Flight Center.
What is Bert Wang, Pe's email address?
AeroLeads has found 1 work email signal at @nasa.gov for Bert Wang, Pe at NASA Goddard Space Flight Center.
Where is Bert Wang, Pe based?
Bert Wang, Pe is based in Houston, Texas, United States while working with NASA Goddard Space Flight Center.
What companies has Bert Wang, Pe worked for?
Bert Wang, Pe has worked for Nasa Goddard Space Flight Center, Tesla, Plant Process Equipment, Inc., Zdjv (Usgc Ii Petrochemical Feed Project – Pe Units), and Brown & Root Industrial Services, Llc.
How can I contact Bert Wang, Pe?
You can use AeroLeads to view verified contact signals for Bert Wang, Pe at NASA Goddard Space Flight Center, including work email, phone, and LinkedIn data when available.
What schools did Bert Wang, Pe attend?
Bert Wang, Pe holds Bachelor’S Degree, Mechanical Engineering from Mcneese State University.
What skills is Bert Wang, Pe known for?
Bert Wang, Pe is listed with skills including Epc, Engineering, Piping, Petrochemical, Project Engineering, Autocad, Refinery, and Stress Analysis.
Find 750M verified contacts
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trial