Bobby Cadle Email and Phone Number
maryland, united states
Bobby Cadle's Location
Havelock, North Carolina, United States, United States
Bobby Cadle's Contact Details
Bobby Cadle work email
- Valid
- Valid
Bobby Cadle personal email
n/a
Bobby Cadle phone numbers
About Bobby Cadle
Currently employed by Naval Air Systems Command (NAVAIR) as the Foreign Military Sales (FMS) C-130 Deputy Avionics/Systems Engineering Program Manager for the Japan Maritime Self Defense Force (JMSDF).
Bobby Cadle's Current Company Details
Naval Air Systems Command
View
Electronics Engineer at Naval Air Systems Command
maryland, united states
- Employees:
- 6576
Bobby Cadle Work Experience Details
-
Electronics EngineerNaval Air Systems Command Nov 2010 - PresentCherry Point Marine Corps Air Station, NcForeign Military Sales (FMS) C-130 Deputy Avionics/Systems Engineering Program Manager, responding to daily fleet support questions and technical issues from the Japan Maritime Self-Defense Force (JMSDF). Researching technical issues and questions myself or delegating to appropriate Avionics, Structures, Mechanical, Propeller, or Sub-system engineers as I deem appropriate. Responding directly to the JMSDF Lieutenant Commander in a timely manner with accurate, yet succinct answers to technical questions and providing troubleshooting recommendations or resolution to technical issues. Representing the Fleet Support Team (FST) on telecoms with PMA-207 FMS Program Management giving status regarding assigned action items. Previously performed the duties as a C-130 Avionics Engineer primarily for FMS supporting Japan, Chile, and the Philippines, providing modification oversight and on-site troubleshooting. Provided updates to requirements, drawings, installation instructions, and wiring diagrams. FMS offered me the opportunity to take junior engineers into the field allowing them to gain experience and confidence with dealing not only with the technical issues at hand but with the pressures encountered when having to resolve technical issues that have resulted in a stop work situation and program management scrutiny. Provided on-site (UK) support for the modification of the Blue Angels “Fat Albert” C-130 support aircraft. Provided publication and wiring diagram updates for Fat Albert. Avionics engineer on the Avionics Obsolescence Upgrade (AOU) glass cockpit upgrade program. Served as Point-of-Entry (POE) engineer for AOU by answering data calls from the fleet and program management, writing, reviewing and approving technical manual updates, dispersing work assignments and managing assignments in WMS.
-
System EngineerUnited Space Alliance Apr 2007 - Nov 2010Kennedy Space Center, FlResponsible for maintenance and modification of electrical cables, connectors, junctions, maintenance of electrical boxes and crew panels, and overall processing of the interconnect system of the Space Shuttle fleet. Performed complex tasks which contained major hazards involving the Space Shuttle electrical systems. Responsible for assessing the flight readiness of Space Shuttle electrical hardware.Researched and assessed Space Shuttle vehicle electrical system anomalies, prepared documentation for problem resolution, vehicle refurbishment, and implemented system modifications. Provided technical support for system testing, and vehicle operations including modifications, inspection, troubleshooting, and mentoring of junior engineers. Performed risk assessments on lost and missing hardware within the Space Shuttle vehicles assessing the impact of the loose hardware on the vehicle’s electrical system while in the ascent and space environments.Analyzed, developed, and approved repair dispositions for nonconforming electrical hardware, avionics boxes, wiring, lighting, and displays and controls on the Space Shuttle vehicles.Performed system data trend analysis and review of all electrical discrepancies for a given vehicle flow. Prepared presentation of results for the NASA customer.Provided operational support and troubleshooting of cranes used for the hoisting of flight hardware to and from the payload bay of a Space Shuttle vehicle. Performed preventative maintenance testing and troubleshooting of Allen-Bradley Programmable Logic Controllers (PLC) and Ormec motion controllers using a laptop computer connected to the crane’s control system. Completed formal training courses provided by Allen-Bradley and Ormec.Acted as group lead for Space Shuttle Discovery electrical engineers distributing work assignments, supporting daily scheduling meetings, and reporting status to upper management. Signed off on completion of vehicle maintenance requirements. -
Liaison EngineerUnited Space Alliance Apr 2004 - Apr 2007Kennedy Space Center, FlProvided on-site engineering support for Space Shuttle vehicle processing activities as a Liaison Engineer. Provided disposition for work authorizing documents, reviewed and approved real-time changes to system paper, and task floor support. Made on-the-fly changes to work instructions on the floor to eliminate errors and ensure proper buy-offs are identified, etc. Solved complex technical problems in a team environment using knowledge of operational concepts and processes. Interfaced with multiple engineering teams, ground processing management, technicians, and NASA to identify operational impacts and priorities and to address floor level issues and work stoppages.Coordinated risk assessments between multiple systems for the lost, found, and missing hardware within the Space Shuttle vehicles. Performed trend analysis of these items and prepared presentations which I gave to the astronaut crew in a briefing prior to launch. Addressed the astronaut’s concerns for these items at the briefing.Responsible for the oversight and buy-off of the installation and removal of temporary work access platforms in and around the Space Shuttle vehicle.Spearheaded the replacement of a missing strap on galley water lines in the crew module during launch countdown, merely hours before launch, resulting in recognition from upper management.Coordinated the clean-up and damage assessment of a major post-flight hydraulic leak in the aft compartment of Space Shuttle Discovery.Maintained compliance to established standards to avoid audit findings in associated engineering documentation.Supported daily scheduling meetings attended by all system engineering groups and occasionally the astronaut crew.Developed and maintained department website using Dreamweaver providing a clearinghouse of information for quick access on the floor.
-
Software EngineerUnited Space Alliance Jun 1996 - Apr 2004Kennedy Space Center, FlTypical activities included application of systems analysis techniques and procedures to determine computer hardware, software, network, or system functional specifications, planning, and implementation; network and data base design, planning and administration; design, development, analysis, creation, testing or modification of computer systems or programs.Developed real-time checkout, control, and launch software in C++ in a Sun Solaris environment for Space Shuttle Radar Altimeter, 3-string GPS, Ku-Band Antenna, Radar Altimeter, and the deployable Air Data Probes as part of the COMM/NAV Integrated Product Team (IPT).Implemented real-time design patterns using Object-Oriented Design (OOD) methodologies, UML, Together, and ControlShell. Developed associated graphical displays and interfaces using SL-GMS. Created and presented Preliminary Design Reviews (PDR) and Code Design Reviews (CDR) and gathered requirements with functional specifications. Participated in design reviews with hardware system engineers.Modeled Space Shuttle Guidance, Navigation, and Control (GNC) hardware systems using the Shuttle Ground Operations Simulation (SGOS) language. Developed models from requirements gathered from hardware engineers and engineering drawings.Participated in launch countdown simulations in the Firing Room for the purpose of launch team training and evaluation. Prepared and executed failure scenarios as part of the simulation.Maintained legacy COMM/NAV checkout, control, and launch software using the Ground Operations Aerospace Language (GOAL). Maintained associated documentation such as Requirements, Specifications, and User Guides. Performed verification and validation of software changes.Developed internal processes, standards, and procedures documented to a Capability Maturity Model (CMM) Level III, institutionalized this documentation, and provided objective evidence of its use.
-
Quality Assurance EngineerUnited Space Alliance Oct 1988 - May 1996Kennedy Space Center, FlAnalyzed and inspected requirements, specifications, verification plans, and code for correctness and adherence to established standards for Space Shuttle checkout, control, and launch software. Coordinated and validated software problem reports. Coordinated and performed code inspections.Release processing and administration of PC-based displays used for Space Shuttle launch support in the Firing Room.Downloaded and processed flight software from Houston for loading on-board the Space Shuttle for on-orbit use.Developed and maintained a departmental website.
Bobby Cadle Skills
Systems Engineering
Avionics
Requirements Analysis
Engineering
Troubleshooting
Quality Assurance
Electrical
Aerospace
Aircraft
Configuration Management
Testing
Dod
Analysis
Security Clearance
Documentation
Aviation
Technical Writing
Spacecraft
Process Improvement
Process Engineering
Bobby Cadle Education Details
-
Webster UniversityComputer Science -
Electrical Engineering -
Computer Programming
Frequently Asked Questions about Bobby Cadle
What company does Bobby Cadle work for?
Bobby Cadle works for Naval Air Systems Command
What is Bobby Cadle's role at the current company?
Bobby Cadle's current role is Electronics Engineer at Naval Air Systems Command.
What is Bobby Cadle's email address?
Bobby Cadle's email address is bc****@****.rr.com
What is Bobby Cadle's direct phone number?
Bobby Cadle's direct phone number is +132169*****
What schools did Bobby Cadle attend?
Bobby Cadle attended Webster University, University Of Central Florida, Eastern Florida State College.
What skills is Bobby Cadle known for?
Bobby Cadle has skills like Systems Engineering, Avionics, Requirements Analysis, Engineering, Troubleshooting, Quality Assurance, Electrical, Aerospace, Aircraft, Configuration Management, Testing, Dod.
Free Chrome Extension
Find emails, phones & company data instantly
Find verified emails from LinkedIn profiles
Get direct phone numbers & mobile contacts
Access company data & employee information
Works directly on LinkedIn - no copy/paste needed
Aero Online
Your AI prospecting assistant
Select data to include:
Total price:
$0.00
0 records × $0.02 per record
Download 750 million emails and 100 million phone numbers
Access emails and phone numbers of over 750 million business users. Instantly download verified profiles using 20+ filters, including location, job title, company, function, and industry.
Start your free trial