Brian Yang Email & Phone Number

Responsible for software and driver development, integration, and maintenance. (TDDI)- Continuing Synaptic application toolkit (DS6, etc...) and implementing additions and modifications.- Development and integration of the send and receive communication (MIPI) for Smart 8135 and Elec 7244 devices.- Assisting in the development of a new bridge board and communication code.- Debug SPI/I2C communication from the bridge device via LA to fix the problems.- Assisting and supporting China-AE engineers and other teams with tool issues and requirements.- Developing software to verify the behavior of flash download and command communication via FPGA.- Developing all new toolkit (GTS) for compatibility between the next-generation software architecture and firmware.- Support FW engineers to analyze Active-Pencil for Bluetooth measure signal via the Nordic toolkit (Sniffer).- Cross-team collaboration to analyze and debug bridge device and FPGA board.- Cross-team (System) collaboration to develop and debug a bridge device board.- C/C++, COM, C#, WPF, and Python

- Development and integration in RF Sub-1G Hz signal for debugging, analysis, and algorithm (Accelerometer, Gyro, FFT, Waterfall, and other...).- Development QT(Pyside2) + Python for cross-platform software programming.- Development XCode-Swift code for IOS APP programming (Bluetooth/LE, AWS, and functionality)- Develop embedded programming for raw data TRX part.- EEG/etc signal process and toolkit.- IoT communication programming and debug. (TI/CCS)

- Implement SiP software architecture toolkit for RD and MP.- Implement Realtek RTL8821CS (WIFI/BT/BLE) for RF Calibration and validation.- Implement Realtek RTL8763BFR (TWS BT/Audio) for RF control and validation.- FMCW radar (60/77GHz) survey, measure, and programming.- Nordic 52840 integrate and verification.- Peripheral interface driver programming.- Support and develop ASL1000 and LCR to remote control equipment programming.- ATE, Remote control Hontech(鴻勁) equipment (Auto Logic IC Test Handler) programming.- Survey equipment solution requests (RFEM, WLAN, NB-IoT, Sub6G, and mmWave).

- Implement WIFI RF MAC TRX via ARM M0/M3 by Keil C environment.- Develop windows programming toolkit (TRAFFIC) to support RF/HW/SW debug and analysis. - Implement firmware to FPGA to verify MAC/PHY for RF TRX signal. - Develop diagnostic / CLI command parse in firmware layer by AT commands. (M0/M3) - Implement WIFI/BLE RF Calibration (VCO/KVCO/RC/TSSI/IQ imbalance/PA non-linear/DCOC-Gain) / Validation RF.- Debug and trace source code (MAC) via Verdi toolkit (Synopsys) to simulation TRX signal in Linux. - RF drivers- Implement Python and TCL programming to control equipment, DUT, data analysis to Graph and stress test. * Multi-download script via Python * Remote control RF equipment via Python * R/W register data via Python and TCL * Cross-platform C/C++ (COM) via Python * Analysis capture data to XY line graph (IQ data) via python * Implement and development database via python to coding (SQLite) * Implement socket driver and JTAG communication programming by Python and TCL

Taiwan

MainResponsible for develop SRW control package to contol chipset (include Broadcom/Qualcomm/Atheros/Realtek/Ralink/TI/etc...) and develop customer/instrument application program.- Develop control chip for WIFI/BT/GPS/FM application program when customer have request.- Develop and integrate Anritsu instrument application program.- Develop windows program code for UI via MS-VC (include Telnet/SOCKET/ATL/MFC/C#).- Develop and measure WIFI (802.11a/b/g/n/ac and MIMO) / BT (BT/BLE) for auto program- Develop ATS application toolkit for production line and R&D/QA Lab.- Support customer requests for all kinds chips- Cooperation with UK/JP/USA engineer for how to develop control SRW chip program- Instrument design for SCPI command via Ethernet or GPIB cable.- Develop all SW architecture program and cooperation with JP site.- Understanding and develop of programming Calibration (Broadcom BF calibration and Qualcomm WCN36xx Calibration via Qualcomm internal functions (.NET) )- Understanding and develop of programming QCA (Qualcomm Atheros) AR600x family chips via QRCT/QLIB and QCA95xx/98xx/99xx for ART/NART and ART2 UI control- Develop Qualcomm chip for WCN36xx Close Loop Power Calibration (CLPC) and algorithm.- Develop Broadcom chip for BCM43xx Beam forming Calibration (BFCal) and verify- Create and develop Anritsu SW architecture via distributed COM for RD, QA and Production line.- Lead the coordination of major customized requirements needing cross-departmental cooperation.- Coordinate and assign jobs to team member including application / modules / develop chip set.- Handle all program and assign customer projects.

Taiwan

MainResponsible for production line application including RF calibration/test process/AT command interface, integrate debug/analysis/decode target trace/dump target image/etc for RD application and design RF tool to measure ETSI 34.121, 3GPP 34.122 spec application.- Design GSM/TDS-CDMA/WCDMA test item and calibration.- Modify ATL architecture COM server just like share port process.- Design stress test process in production line.- Design measure PA/Crystal (26MHz) test program.- Integrate debug trace, analysis protocol package, decode target trace and dump target image functions for TMT application.- Design target dump image function for console command.- Design measure power charge, uncharged time application.- Control instrument via GPIB command.- Co-work with RF team for debugging. Provide calibration, validation, troubleshoot and optimization.- Co-work with Driver team for defines L1, AT/Tiny command.- Lead the coordination of major customized requirements needing cross-departmental cooperation.- Handle all program and assign customer projects.

Taiwan

MainResponsible for production line application including RF calibration/test process/AT command interface, integrate debug/analysis/decode target trace/dump target image/etc for RD application and design RF tool to measure 3GPP,ETSI spec application.1. Design GSM/WCDMA test item and calibration. (Intel solution)2. Design Intel solution for Diag command program.3. Design Intel solution IFL and modem of communication program.4. Design program sequence and architecture.5. Co-Work with Driver, Protocol, RF team for debugging. Provide calibration, validation, troubleshoot and optimization.6. Handle and planning production line process.

Taiwan

MainResponsible for production line application including RF calibration/test process/AT command interface, integrate debug/analysis/decode target trace/dump target image/etc for RD application and design RF tool to measure 3GPP spec application.1. Design WCDMA test item and calibration. (Qualcomm solution)2. Design target dump image function for console command.3. Convert two map files after save to excel file.4. Search files memory application.5. Develop production line application.

Taiwan

MainResponsible for RD/Production line tool application including RF calibration/test process/AT, supportproduction line.1. Develop production line tool application.2. Develop Agilent TestExec SL, NI-LabView, NI TestStand tool application to design test environment.