Cad Designer
Current
May 2016 - Present
AeroLeads people directory · profile
Bruce Green Email & Phone Number
CAD Designer
at
3-Dimensional Services Group
2 work emails found
@urgentplastics.com
LinkedIn matched
✓ Verified May 2026
4 data sources
Profile completeness 100%
Current company
Role
CAD Designer
Location
Romulus, Michigan, United States
Company size
Who is Bruce Green? Overview
A concise factual answer block for searchers comparing this professional profile.
Quick answer
Bruce Green is listed as CAD Designer at 3-Dimensional Services Group, a company with 67 employees, based in Romulus, Michigan, United States. AeroLeads shows a work email signal at urgentplastics.com and a matched LinkedIn profile for Bruce Green.
Bruce Green previously worked as Senior Designer and Programmer at 3D Polymers and Programming Engineer & Designer at Trenton Forging. Bruce Green holds General Studies from Schoolcraft College.
Company email context
Email format at 3-Dimensional Services Group
This section adds company-level context without repeating Bruce Green's masked contact details.
{first_initial}{last}@urgentplastics.com
89% confidence
AeroLeads found 2 current-domain work email signals for Bruce Green. Compare company email patterns before reaching out.
Profile bio
About Bruce Green
Apply customer changes to 3d model of prototype and production tools Currently Delcam Powermill 2015 & PowerShape 2015 productsProgram cutter paths Delcam powermillSet-up and load tools and run programsModify programs at the machine as needed (G & M code)Design tools from cad data and design/build prototype and production toolingInstrumental in developing and implementing many power-mill enhancementsProficient with Faro Edge with Scanner and Cam2 Measure 10Coordinate the build of prototype and production tools Use of mastercam cad programmingSet-up and load tools and run programsModify programs at the machine as needed (G & M code)Train and oversee apprentices and upgradersDesign tools from cad data and design/build prototype toolingSpecialties: ADDITIONAL WORK EXPERIENCE:I also have 10 yrs in the processing side of molding running a 25 person crew to draw upon.
Listed skills include Injection Molding, Manufacturing Operations Management, Mastercam, Continuous Improvement, and 13 others.
Current workplace
Bruce Green's current company
Company context helps verify the profile and gives searchers a useful next step.
3-Dimensional Services Group
10 roles · 16 years
Bruce Green work experience
A career timeline built from the work history available for this profile.
Senior Designer And Programmer
3D Polymers
Oversee Design & Program of all aspects of Mold BuildingProficient with Faro Edge with Scanner and Cam2 Measure 10
Jul 2014 - May 2016
Programming Engineer & Designer
Trenton Forging
Engineering Manager @ Trenton Forging
Aug 2010 - Jul 2014
Manager
Trenton Forging
2010 - 2014
~4 yrs
Cam Programmer
Eagle Rotary Systems
Jul 2009 - Jul 2010
Cnc Programmer/Designer
Mar 2009 - Apr 2009
Cnc Programmer/Designer
Advance Mold
Apply customer changes to 3d model of prototype and production tools Currently using Mastercam V-9 and Delcam Powermill 8.0 & PowerShape 7350 productsProgram cutter paths using mastercam v9 and Delcam powermillSet-up and load tools and run programsModify programs at the machine as needed (G & M code)Design tools from cad data and design/build prototype and.
Sep 2003 - Dec 2008
Cnc Programmer/Designer
C & I Technology
Coordinate the build of prototype and production tools Use of mastercam cad programmingSet-up and load tools and run programsModify programs at the machine as needed (G & M code)Train and oversee apprentices and upgradersDesign tools from cad data and design/build prototype toolingUse of mastercam mill v-7, v-8
Sep 2002 - Sep 2003
Mold Maker
Dunn-Rite Ind.
Build production type / proto-type molds Set-up and load tools and run programsModify programs at the machine as needed (G & M code)Do repairs and engineering changes as neededUse of OKK cnc machine centers
Jan 2001 - Sep 2002
Mold Maker
Motor City Mold
Build production type / proto-type molds Do repairs and engineering changes as neededSet-up and load tools and run programsModify programs at the machine as needed (G & M code)Occasionally design tools from part print and design/build prototype toolingUse of fadel cnc machine centers with Gibbs visulizer and some g-code programmingUse of mastercam
Oct 2000 - Sep 2001
Team & coworkers
Colleagues at 3-Dimensional Services Group
Other employees you can reach at 3dimensional.com. View company contacts for 67 employees →
MD
Michael Downey
Colleague at 3-Dimensional Services Group
Columbiaville, Michigan, United States, United States
View →
JR
Jeremy Reynolds
Colleague at 3-Dimensional Services Group
Detroit Metropolitan Area, United States
View →
JR
Jeff Rebbe
Colleague at 3-Dimensional Services Group
Dryden, Michigan, United States, United States
View →
ED
Earl Daugherty
Colleague at 3-Dimensional Services Group
Greenwood, South Carolina, United States, United States
View →
SW
Shelly Williams
Colleague at 3-Dimensional Services Group
Davison, Michigan, United States, United States
View →
RF
Rose F.
Colleague at 3-Dimensional Services Group
Imlay City, Michigan, United States, United States
View →
DP
Drew Payne
Colleague at 3-Dimensional Services Group
Lapeer, Michigan, United States, United States
View →
CP
Cameron Pollock
Colleague at 3-Dimensional Services Group
Gladwin, Michigan, United States, United States
View →
ED
Eugene Dabbs
Colleague at 3-Dimensional Services Group
Detroit Metropolitan Area, United States
View →
BS
Brendan Sokol
Colleague at 3-Dimensional Services Group
St Clair Shores, Michigan, United States, United States
View →
Michael Downey
Colleague at 3-Dimensional Services Group
Columbiaville, Michigan, United States, United States
View →
JR
Jeremy Reynolds
Colleague at 3-Dimensional Services Group
Detroit Metropolitan Area, United States
View →
JR
Jeff Rebbe
Colleague at 3-Dimensional Services Group
Dryden, Michigan, United States, United States
View →
ED
Earl Daugherty
Colleague at 3-Dimensional Services Group
Greenwood, South Carolina, United States, United States
View →
SW
Shelly Williams
Colleague at 3-Dimensional Services Group
Davison, Michigan, United States, United States
View →
RF
Rose F.
Colleague at 3-Dimensional Services Group
Imlay City, Michigan, United States, United States
View →
DP
Drew Payne
Colleague at 3-Dimensional Services Group
Lapeer, Michigan, United States, United States
View →
CP
Cameron Pollock
Colleague at 3-Dimensional Services Group
Gladwin, Michigan, United States, United States
View →
ED
Eugene Dabbs
Colleague at 3-Dimensional Services Group
Detroit Metropolitan Area, United States
View →
BS
Brendan Sokol
Colleague at 3-Dimensional Services Group
St Clair Shores, Michigan, United States, United States
View →
2 education records
Bruce Green education
General Studies
General
Schoolcraft Cc
FAQ
Frequently asked questions about Bruce Green
Quick answers generated from the profile data available on this page.
What company does Bruce Green work for?
Bruce Green works for 3-Dimensional Services Group.
What is Bruce Green's role at 3-Dimensional Services Group?
Bruce Green is listed as CAD Designer at 3-Dimensional Services Group.
What is Bruce Green's email address?
AeroLeads has found 2 work email signals at @urgentplastics.com for Bruce Green at 3-Dimensional Services Group.
Where is Bruce Green based?
Bruce Green is based in Romulus, Michigan, United States while working with 3-Dimensional Services Group.
What companies has Bruce Green worked for?
Bruce Green has worked for 3-Dimensional Services Group, 3D Polymers, Trenton Forging, Eagle Rotary Systems, and Nyx Inc..
Who are Bruce Green's colleagues at 3-Dimensional Services Group?
Bruce Green's colleagues at 3-Dimensional Services Group include Michael Downey, Jeremy Reynolds, Jeff Rebbe, Earl Daugherty, and Shelly Williams.
How can I contact Bruce Green?
You can use AeroLeads to view verified contact signals for Bruce Green at 3-Dimensional Services Group, including work email, phone, and LinkedIn data when available.
What schools did Bruce Green attend?
Bruce Green holds General Studies from Schoolcraft College.
What skills is Bruce Green known for?
Bruce Green is listed with skills including Injection Molding, Manufacturing Operations Management, Mastercam, Continuous Improvement, Cad/Cam, Ppap, Lathe, and Molding.
Find 750M verified contacts
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trialPeople with similar names
Check these profiles if this is not the Bruce Green you were looking for.
View similar profiles
