Caio Fellipe Lopes Email & Phone Number

Maricá, Rj, Br

Egito, Cairo, Alexandria

- Valaris DS-12 - 6th generation drillship in Egypt - Drillship under operational contract with BP;- Performing corrective, preventive and predictive maintenance on drilling / top side equipment on the drillship;- Monitoring, identification and resolution of failures in mechanical, hydraulic and pneumatic components;- Seadrill West Gemini - 6th generation drillship in Angola - DrillShip under operational contract with Total Energies;- Supporting rig mechanical team on predictive, preventive and corrective inspections;- Participation on upgrade process on topside systems, with installation of finger boards with Salunda sensor;- Also cooperating on maintenance plan, materials preparation, department organization and work order in general;- Familiarized with duties on Maximo (maintenance management system) keeping register of PM´s completed and other actions.

Las Palmas, Ilhas Canárias, Espanha

- Valaris DS-12 Commissioning project - 6th gen drillship in Spain / Las Palmas to Egpty (Temporary Hitch 12/2023 to 01/2024);- Valaris DS-8 Reactivation and commissioning project - 6th gen drillship in Spain / Las Palmas shipyard (07/2023 to 12/2023);- Valaris DS-17 Reactivation and commissioning project - 7th gen drillship in Spain / Las Palmas shipyard (12/2022 – 07/2023);- Covering the position of mechanic supervisor during his absence 2023, assigned on leadership duties such as team coordination, documents, reports, expertise on using Valaris Now (maintenance management system) for work orders and additional procedures, follow up on department responsibilities on the project, contact with vendors, quotation, material requisition, etc;- Procedures of overhaul, testing and condition assessment on top side equipment;- Strong knowledge in: NOV TDX 1250 top drive, TDS 8 top drive, Mud pumps NOV 14P-220, Drawwork Main and Aux, Elevators BX4, BX5, BX7, Agitators Brandt 25RG, 30RG, 40RG, NOV hydraulic cathead, Hydra racker IV-ER, Hydratong ARN-200, Pipe Handling Catwalk Hull 2559s, Riser Handling Catwalk Hull 2559s, Rotary Support Table NOV RST755, Pneumatic Fingerboard;- Preparation for acceptance tests, navigation to Brazil and pre-ops procedures for start-up of contract on DS-17 and DS-08.

Espanha

- Joined West Jupiter (7th generation drillship) for Reactivation Project;- Intermittent contract, supporting rig mechanical team on predictive, preventive and corrective inspections;- Involved in overhaul process for hydraulic troubleshooting on drilling equipment such as Top Drive (TDX-1250, HPS-1000), DrawWorks (SSGD 1250/1000), Finger Board, Torque Master, Mud Pumps (14-P-220), Shale Shakers, Winches, ManRiders, dryer, mud centrifuges, augers and other components;- Overhaul and Condition assessment in all equipment;- Participated on various upgrades on NOV topside systems;- Installation of new equipment and parts replacement as well;- Disassembly and assembly, tests and preparation for new drilling campaign;- Also cooperating on maintenance plan, materials preparation and work order to overhead cranes;- Familiarized with duties on Maximo (maintenance management system) keeping register of PM ́s completed and other actions.

Romênia

→ Responsible for the Maintenance and Repair processes of Gas and Diesel engines, turbines and propulsion systems. Also performing activities such as:- Maintenance and repair of Cartepillar, Wartsila, Rolls Royce and ABB AZIPOD engines.- Carrying out Mobilization and Demobilization of Materials (House Keeping) necessary for operations.- Implementation of Equipment Mobilization and Demobilization as: Electrical panels, Truster, motors, Mobilization of Strandjacks in the Pipe Deck, Mobilization of anchors and supports installed together to the Strandjacks, Mobilization of Hightork for the Trunsters and Movement of two motors as well as the whole mechanical part of the Trunster.- Operations and Maintenance, such as: Removal of screws for the installation of the dome (Removed 39 Bolts with the size of the socket 46 and with the installation of plug after this operation) | Trunster Tensioning Operation (38 tons Submerged | 42 tons Suspended and power 4300 HP model ABB Azipod azimuthable) | Testing pressure and tightness (1 bar pressure) | Use of torque meter (torque from 300 to 690 Newtons) to drain the internal pressure of the Trunster and make the oil bleed with water and air | Carrying out Welding, Grinding, Material Inspection and Cargo Handling Processes to meet operations.- International activity in different countries, living with multicultural teams and different nationalities.Main Units of Performance: Transocean GSF Development Driller II e GSP Deep Driller II (Ultra-Deepwater Semi-Submersible) | Main Client: GPS Holding SA.

- Responsible for the maintenance of all equipment of pipelay operations on board PLSV vessel Sapura Rubi and Sapura Diamond;- In charge of leading and supervising the mechanical and hydraulic team, ensuring efficiency and safety;- Solid knowledge on 650T Huisman Tiltable Lay system, electro-hydraulic and control systems;- Initiatives to optimize maintenance, repair, upgrade and modification of hydraulic equipment;- Checking spare parts, consumables, ensuring the necessary for the vessel to operate without downtime;- Shipyard experience, involved on Sapura Rubi and Sapura Diamante drydock, in the supervision of the replacement of hydraulic hoses, stress zones NDT inspection, and performing cargo test on tensioners, moonpool equipment, service crane and others (following global standards).Maintenance and hydraulic troubleshooting on drilling equipment such as Top Drive (TDX-1250, HPS-1000), DrawWorks (SSGD1250/1000), Finger Board, Torque Master, Mud Pumps (14-P-220), Shale Shakers, Winches, ManRiders, etc; Maintenance on dryer, mud centrifuges and augers;-Inspections, maintenance plan, materials preparation and work order to overhead cranes; Predictive, preventive and corrective inspections.

→ Responsible for the processes of Inspection, Repair and Maintenance of Equipment and Surfaces through Industrial Painting processes performing activities such as: Repairing and Painting, Painting Parts, Treatment and Painting, Paint Preparation.- Carrying out painting processes in Surfaces such as: Flanges, Pipes and Support Processes, using equipment such as: nozzle, sander, chipper, steel brush and manual sandpaper.- Responsible for cleaning surfaces by brushing, sanding or removing old paint from damaged parts with scrapers, solvents and air jets to dispose of waste. - Grinding and retouching faults and splices using suitable material to correct defects and facilitate ink adhesion;Operations in vessels: Petrobras Umbilical Cord Coils | Main Clients: Petrobras and Baker Huges.

Baker Hughes

→ Responsible for the processes of Inspection, Repair and Maintenance of Equipment and Surfaces through Industrial Painting processes performing activities such as: Repairing and Painting, Painting Parts, Treatment and Painting, Paint Preparation.- Carrying out painting processes in Surfaces such as: Flanges, Pipes and Support Processes, using equipment such as: nozzle, sander, chipper, steel brush and manual sandpaper.- Responsible for cleaning surfaces by brushing, sanding or removing old paint from damaged parts with scrapers, solvents and air jets to dispose of waste. - Grinding and retouching faults and splices using suitable material to correct defects and facilitate ink adhesion;Operations in vessels: Petrobras Umbilical Cord Coils | Main Clients: Petrobras and Baker Huges.

Barra Da Tijuca

→ Responsible for Patrimonial Surveillance routines at the Olympic Park (Barra da Tijuca - Rio de Janeiro), where the Olympic Games took place at the service of Aglo Autoridade de Governança.

→ Diversified work at the Company, focusing on Maintenance and Operation of Equipment and Machines processes, monitoring the performance of engines, lubricating and maintaining engines and other mechanical equipment in perfect condition. Also carrying out activities such as:- Responsible for Preventive, Predictive and Corrective Maintenance in Engines (Wartsilla and Cartepillar) and Machines, performing Supply processes | Temperature, pressure and volume control in machines | Verification and recording of lubricating oil level readings in Machinery and Equipment, completing whenever necessary | Lubrication of moving parts, such as: gears, shafts and bearings in motors and auxiliary equipment; | Leak Monitoring and Notification | Responsible for routine maintenance and minor repairs to engine room equipment as per guidance and procedures | Equipment Technical Manuals | Responsible for Cleaning accessories and repairing equipment | Machines | Maintenance of BOP Connector Actuators | Disassembly and assembly of subsea valve actuators, assembly of diverter handling tool, replacement of Risers seals. | Maintenance and cleaning of filters | Execution of oil receiving, transfer and pumping maneuvers, among others.- Support to Tool and Parts Inventory Control processes | Control input and output of spare materials in the engine room.- Carrying out 5S practices, responsible for keeping the engine room and associated workshop clean, tidy and free of hazards. | - Experience with cargo handling and painting processes and equipment maintenance.

- Responsible for carrying out maintenance on Cranes and manual equipment, deck machinery, tubular products, handling equipment and other equipment and tools for the drilling deck. In addition to being directly responsible for the Deck Cleaning and Organization processes. Support to Cargo Handling Processes (Backload and Offload), assisting the Crane in the Cargo processes, unloading of supply vessels and transferring people from boats and helicopters. - Responsible for assisting Subsea in the maintenance and tests of the B.O.P, hydraulic lines, shock kill booster valves, Riser's according to operational checklist and always checking the pressure and dynamics indexes of the equipment. - Domain in Operations and Maintenance of Cargo Handling and Cranes equipment, serving 6th, 4th and 3rd generation units. Main Unit of Operation: SS-50| Main Client: Petrobras.

→ Responsável pelos processos de Inspeção, Reparo e Manutenção de Equipamentos e Superfícies através de processos de Pintura Industrial realizando atividades, tais como: Reparação e Pintura, Pintura de Peças, Tratamento e Pintura, Preparação de Tintas.- Realização de processos de pintura em Superfícies tais como: Flanges, Tubulações e Processos Suporte, utilizando equipamentos tais como: agulheiro, lixadeira, picador, escova de aço e lixa manual.- Responsável em Limpar as superfícies escovando-as, lixando-as ou retirando a pintura velha das partes danificadas com raspadeiras, solventes e jatos de ar, para eliminar resíduos. - Lixar e retoca falhas e emendas utilizando material apropriado para corrigir defeitos e facilitar a aderência da tinta;

Atuação pela empresa Lotus Reparos Navais alocado no Estaleiro Renavi→ Responsável pelos processos de Inspeção, Reparo e Manutenção de Equipamentos e Superfícies através de processos de Pintura Industrial realizando atividades, tais como: Reparação e Pintura, Pintura de Peças, Tratamento e Pintura, Preparação de Tintas.- Realização de processos de pintura em Superfícies tais como: Flanges, Tubulações e Processos Suporte, utilizando equipamentos tais como: agulheiro, lixadeira, picador, escova de aço e lixa manual.- Responsável em Limpar as superfícies escovando-as, lixando-as ou retirando a pintura velha das partes danificadas com raspadeiras, solventes e jatos de ar, para eliminar resíduos. - Lixar e retoca falhas e emendas utilizando material apropriado para corrigir defeitos e facilitar a aderência da tinta;- Realização de Acesso por cordas quando necessário para o desenvolvimento das atividades.Principais unidades de Atuação: Estaleiros Maritimos e Industriais | Principal Cliente: Estaleiro Renave.

→ Responsável pelos processos de Inspeção, Reparo e Manutenção de Equipamentos e Superfícies através de processos de Pintura Industrial realizando atividades, tais como: Reparação e Pintura, Pintura de Peças, Tratamento e Pintura, Preparação de Tintas.- Realização de processos de pintura em Superfícies tais como: Flanges, Tubulações e Processos Suporte, utilizando equipamentos tais como: agulheiro, lixadeira, picador, escova de aço e lixa manual.- Responsável em Limpar as superfícies escovando-as, lixando-as ou retirando a pintura velha das partes danificadas com raspadeiras, solventes e jatos de ar, para eliminar resíduos. - Lixar e retoca falhas e emendas utilizando material apropriado para corrigir defeitos e facilitar a aderência da tinta;- Realização de Acesso por cordas quando necessário para o desenvolvimento das atividades.

→ Atuação direta em contato com o cliente Petrobras, realizando processos de liberação de Obras junto ao Cliente | Processamento de Planejamento e Logística de Materiais e Pessoal para o desenvolvimento das Obras de Contenção da Pedreira da Petrobras – Localizada em Madureira RJ | Processamento de Compras de Materiais e Gestão de Estoque para o atendimento das Obras | Suporte ao RH na Contratação de Pessoal e Gestão das equipes para atendimento dos requisitos contratuais, conforme demandas do cliente.Principal Cliente: Petrobras

Technical Education, Industrial Mechanics

Technical Education, Industrial Mechanics