Please complete the CAPTCHA to continue
@nasa.gov
✓
LinkedIn matched
A concise factual answer block for searchers comparing this professional profile.
Caitlin Burth is listed as GNC Systems Engineer at NASA Wallops Flight Facility at NASA - National Aeronautics and Space Administration, a with 33448 employees, based in Wallops Island, Virginia, United States. AeroLeads shows a work email signal at nasa.gov and a matched LinkedIn profile for Caitlin Burth.
Caitlin Burth previously worked as Guidance, Navigation, & Control (GNC) Systems Engineer at Nasa - National Aeronautics And Space Administration and Technology Manager at Nasa - National Aeronautics And Space Administration. Caitlin Burth holds Bachelor’S Degree, Mechanical Engineering from Penn State University.
This section adds company-level context without repeating Caitlin Burth's masked contact details.
AeroLeads found 1 current-domain work email signal for Caitlin Burth. Compare company email patterns before reaching out.
Caitlin Burth is a GNC Systems Engineer at NASA Wallops Flight Facility at NASA - National Aeronautics and Space Administration.
Company context helps verify the profile and gives searchers a useful next step.
A career timeline built from the work history available for this profile.
Wallops Island, Virginia, United States
GNC engineer for sounding rocket and balloon sub-orbital payloads.Highlights include:• Redesigning and qualifying a new star tracker for sounding rocket missions • Designing a new star tracker for balloon missions that can be remotely focused while in flight• Operator of the Wallops Arc Second Pointer (WASP) system and coarse azimuth pointing systems
Wallops Island, Virginia, United States
Deputy Project Manager of Super Pressure Balloon (SPB) development and the SPB Instrumentation (SPBi) development team.Project manager of the following projects: • Balloon coarse azimuth pointing systems/rotators (Long Duration Balloon/legacy system and the 5.5K system)• Refurbishment of flown Advanced Collar Electronics Radio (ACER) units and the redesign and ground qualification of ACER 2.0• Developing a carbon fiber deployable solar array system for balloons
Wallops Island, Virginia, United States
Mechanical engineer for multiple sub-orbital platforms including: balloons, aircraft, sounding rockets, and smallsats/cubesats. Focus in design of structures, and have experience with analysis, manufacturing, assembly, environmental testing, and field experience. Highlights Include:• Designed a coarse azimuth pointing system specifically for 5.5K lb suspended scientific balloon payloads. Design is an approved U.S. Patent.• Collaborated with multidisciplinary engineers to create and evaluate feasibility of smallsat/cubesat mission proposals through the WFF Mission Planning Lab (MPL) & GSFC Mission Design Lab (MDL).• Supported multiple evolve the workforce groups throughout Goddard and Wallops. Through the Engineering Technology Directorate (ETD) Transformation Strategy Team for Workforce, I led a sub-team to create an Onboarding Orientation for new employees. I also supported planning and led a retreat for ETD early career (EC) employees in 2019 & 2020 and aided in creating an ETD EC Committee in 2021. As a member of WFF-GBLT Action Team #13, I led an early career retreat in 2021 for contractor and civil workforce to create an actionable list of next steps for senior leadership to reduce burnout and improve professional development opportunities.
Wallops Island, Virginia, United States
• Redesigned the Wallops Arc Second Pointer (WASP) using Autodesk Inventor Pro - Reduced mass by 29%, surpassing goal reduction of 15% - Performed FEA on the redesigned WASP structure using Abaqus & SolidWorks, ensured redesign had positive margins• Aided with education outreach program: Wallops Rocket Academy for Teachers and Students (WRATS)
Greenbelt, Md
• Redesigned the optical bench & the optical mounts for the internal far-infrared & near-infrared optics for the Balloon Experimental Twin Telescope for Infrared Interferometry (BETTII)• Invented a passive cooling system for a leach controller box• Constructed a clean room for assembly of the dewar & internal optical bench
• Designed and iterated upon an optical bench & optical mounts for the internal far-infrared optics for BETTII using SolidWorks• Created a solid body model of the detectors for the internal near-infrared optics using SolidWorks
Greenbelt, Md
• Conducted & documented failure/stress analysis on electrical components for the Global Precipitation Measurement (GPM) mission• Authored an instruction manual for operating the existing vibration table• Modeled vibration test fixtures using Solid Edge• Performed thermal vacuum tests on star tracker baffles for the Magnetospheric Multiscale Mission (MMS)
Greenbelt, Md
• Studied & validated a novel solar cycle prediction method for Dr. Joseph Fainberg & Dr. Vladimir Osherovich, in the Heliophysics department• Researched & wrote a paper evaluating the value of a manned mission to Mars
Other employees you can reach at nasa.gov. View company contacts for 33448 employees →
Mark Harmon
Colleague at Nasa - National Aeronautics And Space AdministrationManchester, Connecticut, United States
View →
RK
Ritva Keski-Kuha
Colleague at Nasa - National Aeronautics And Space AdministrationGreenbelt, Maryland, United States
View →
BW
Bruce Wernek
Colleague at Nasa - National Aeronautics And Space AdministrationLanham, Maryland, United States
View →
JK
John Keefe
Colleague at Nasa - National Aeronautics And Space AdministrationWashington, District Of Columbia, United States
View →
SA
Sergio Antoniolli
Colleague at Nasa - National Aeronautics And Space AdministrationArgentina
View →
RG
Robert Guthrie
Colleague at Nasa - National Aeronautics And Space AdministrationTitusville, Florida, United States
View →
AD
Angelia Davis
Colleague at Nasa - National Aeronautics And Space AdministrationWashington, District Of Columbia, United States
View →
JP
Jasmine Powell
Colleague at Nasa - National Aeronautics And Space AdministrationGreater Houston, United States
View →
JB
Jasmine Burton
Colleague at Nasa - National Aeronautics And Space AdministrationUnited States
View →
ED
Elaine Duncan
Colleague at Nasa - National Aeronautics And Space AdministrationHuntsville, Alabama, United States
View →
Activities and Societies: Schreyer Honors College
Researched, designed, developed prototypes, and conducted FEA and financial analysis for solutions to making Hawker Centres (cultural food.
Quick answers generated from the profile data available on this page.
Caitlin Burth works for NASA - National Aeronautics and Space Administration.
Caitlin Burth is listed as GNC Systems Engineer at NASA Wallops Flight Facility at NASA - National Aeronautics and Space Administration.
AeroLeads has found 1 work email signal at @nasa.gov for Caitlin Burth at NASA - National Aeronautics and Space Administration.
Caitlin Burth is based in Wallops Island, Virginia, United States while working with NASA - National Aeronautics and Space Administration.
Caitlin Burth has worked for Nasa - National Aeronautics And Space Administration and Nasa Goddard Space Flight Center.
Caitlin Burth's colleagues at NASA - National Aeronautics and Space Administration include Mark Harmon, Ritva Keski-Kuha, Bruce Wernek, John Keefe, and Sergio Antoniolli.
You can use AeroLeads to view verified contact signals for Caitlin Burth at NASA - National Aeronautics and Space Administration, including work email, phone, and LinkedIn data when available.
Caitlin Burth holds Bachelor’S Degree, Mechanical Engineering from Penn State University.
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trial Search contacts