Carlos Ramos Email & Phone Number

Position: Instrument Specialist. (August 2023 – Present). Location: Calgary Office - Canada. Project consisting of: Thermal CSS-GEN3 Project• New 50 wells (Primrose PAD 93/71C/162)• Procurement and Engineering support• Instrumentation, Control System, Packages support, E-House, FAT's

Fort Mcmurray, Alberta, Canada

Position: Instrument Specialist. (April 2022 – July 2023). Location: Fort McMurray - Canada. Description: Horizon Oil Sands. Project consisting of: DRU-2 Furnace Project• Replacing existing 2 furnaces with new 8 furnaces• Construction and Pre-commissioning support• Coordination with DCS, SIS, BMS, FAS, O2 Analyzers, Endress & Hauser vendors

Fort Mcmurray, Alberta, Canada

Position: Instrument Specialist. (January 2021 – April 022). Location: Fort McMurray - Canada. Description: Horizon Oil Sands. Project consisting of: East Tank Farm Expansion Project• Construction and Pre-commissioning support• Coordination with DCS, SIS, FAS, Recovery Gas Compressor vendors.

Calgary, Alberta, Canadá

Position: Instrument Specialist. (January 2019 – January 2021). Location: Calgary - Canada. Description: Horizon Oil Sands. Project consisting of: OPPSD (Over Pressure Protection System) Project and Pressure Relief Valve re-validation Project• OPPSD (Over Pressure Protection System downstream calculation.* Pressure Relief Valve re-validation downstream calculation

Calgary Y Alrededores, Canadá

Position: Instrument Specialist. (January 2018 – December 2018). Location: Calgary - Canada. Description: Horizon Oil Sands. Project consisting of: New Paraffinic Dilbit (Diluted Bitumen) Project• Development of EDS in house.• Ensure the integration of the new plant to the existing one.• Interfaces with: existing Units, inter-disciplines, Contractors/Sub Contractors/Vendors• Engineering, Procurement, Construction and support for pre-commissioning and commissioning.

Fort Mcmurray, Alberta, Canada

Position: Specialist Instrument. (September 2017 – December 2017). Location: Horizon - Canada. Description:Horizon Oil Sands. Project consisting of: Reconstruction Substation and RIB Building 48-R-3. • Procurement, Expedition, Coordination with Vendors new DCS, SIS, BMS, VMS, FAS, CCS System and marshalling cabinets, FO patch panels.• Scope of Work: red mark ups drawing, procurement, FAT, SAT, construction, pre-commissioning and commissioning of new DCS, SIS, BMS, VMS, FAS, CCS cabinets.• Pre-commissioning and commissioning of 3200 loops (Units 41, 42, 43 and 48).

Fort Mcmurray, Alberta, Canada

Position: Instrument Specialist. (January 2017 – September 2017). Location: Horizon - Canada. Description: Horizon Oil Sands. Project consisting of: New Combined HydrotreaterIncrease production capacity of Horizon Oil Sands Upgrader from 180.000 BPD to 250.000 BPD.• Field Engineering, Procurement, Construction and support for pre-commissioning and commissioning.• Purchase of Instruments, and supporting Control Systems (DCS, ESD, BMS, VMS, CCC, WW, OVSP, FAS, PLCs).

Fort Mcmurray, Alberta, Canada

Position: Instrument Specialist. (September 2016 - December 2016). Location: Horizon - Canada. Description: Horizon Oil Sands. Project consisting: New Hydrogen Unit of 2,270 MT- Supporting pre-commissioning and commissioning.

Calgary - Canada

Position: Instrument Specialist. (June 2011 – August 2016). Location: Calgary/Horizon - Canada. Description: Horizon Oil Sands. Project consisting of: New Gasoil HydrotreaterIncrease production capacity of Horizon Oil Sands Upgrader from 110.000 BPD to 180.000 BPD.• Development of EPC in Snamprogetti Calgary Office.• Supervision and management of I&CS engineer’s staff.• Purchase of Instruments, Control Systems (DCS, ESD, BMS, VMS, FAS, CCS), and communication system.• Ensure the integration of the new plants to the existing ones.• Support to develop the Contract and Scope of Work and Project Execution Plan.• Interfaces with: existing Units, inter-disciplines, Contractors/Sub Contractors/Vendors• Engineering, Procurement, Construction and support for pre-commissioning and commissioning.

Al-Jubail – Kingdom Of Saudi Arabia

Position: Senior Instrument and Control System Engineer. (July 2009 – May 2011). Location: SABIC (Saudi Basic Industries Corporation). Plant: IBN RUSHD II Petrochemical Complex Industrial City. Department: E&PM (Engineering & Project Management). Project Cost: 1,4 Billions USD. Project consisting of: PTA DBN from 350 KTA to 700 KTA + new ETP 300 m3/h:• Development of ITB & TBE for PDP and FEED in Saudi Arabia Office.• Development of PDP & FEED in Korea Samsung Office.• Development of ITB & TBE for EPC in Houston Fluor Office.• Development of EPC in Taiwan CTCI Office.• Permanent assistance to review Engineer Deliverables to accomplish the most effective plant design.• Continuous evaluation of EPC’s in order to achieve optimal Opex and Capex.• Support to develop the Contract and Scope of Work, Project Execution Plan and Project Close Out.• Prepare the Technical & Commercial Analysis and review the Trend Alert and Change Orders• Interfaces with: existing Units, inter-disciplines, Contractors/Sub Contractors/Vendors• Support to develop the Scope of Work, Engineering, Procurement, cost control, construction, pre-commissioning and commissioning.

Calgary, Canada

Position: Senior Instrument and Control System Engineer. (July 2008 – Marsh 2009). Location: Calgary. Description: SUNCOR–Voyager–Coker Unit 200 KBPD. Project consisting of: • Development of Detail Engineering and responsible for instrumentation commodities, MRQs, MRPs, TBEs, review Vendor Drawings and Vendor Packages• Coordinate activities, meeting with engineering (other disciplines), procurement, planning, construction and vendors.• Responsible to check and follow the international and client standards.• Ensure QC procedures are adhered in engineering documents.

Calgary - Canada

Position: Senior Instrument and Control System Engineer. (July 2006 – July 2008). Location: Calgary. Description: Shell Optimization Waterton. Project consisting of:• Development of Detail Engineering.• Responsible for instrumentation commodities, MRQs, MRPs, TBEs, Vendor Drawings and Vendor Packages• Coordinate activities, meeting with engineering (other disciplines), procurement, planning, construction and vendors.• Responsible to check and follow the international and client standards.

Caracas - Venezuela

STATOIL / TOTAL / PDVSA (Joint Venture SINCOR). (May 2001 – July 2006). Location: Main Station Upgrade Project. Description: Expansion of existing facilities (Production Capacity was increased from 15 to 220 KBPD of Heavy Oil Production from 2001 in 2 years).(220k BPD of Extra Heavy Crude Oil + 100k BPD produced water). Project Cost: 8.5 Billions USD. Project consisting of:• Development of Basic and Detail Engineering, construction.• Clusters Expansion, new Clusters and Main Station Expansion. • Purchase of I&CS, Multiphase pump, new Power Houses, Air compressor packages, field instruments, PCCS and ESD Systems, communication system, optic fiber, CCTV.• Supervision and management of engineers staff.• Facilitating and participating in Process Hazard Assessments, and FAT, IFAT and SAT coordination.• Supervision, direction and implementation of Tie-ins during Clusters shutdown (mechanical/electrical/instrument and control system).• Interface with Operations, Maintenance, Engineering, Purchaser, Expeditor, Contract, Construction, project scopes and execution to ensure operational integrity of field facilities.• Provide supervision and direction to multiple engineering and construction projects.• Engineering, Procurement, cost control, construction management.• Working closely with outside engineering firms during the detailed engineering phase when was required.• Support to develop the Contract and Scope of Work, Project Execution Plan and Project Close Out.• Prepare the Technical & Commercial Analysis and review the Trend Alert and Change Orders• Interfaces with: existing Units, inter-disciplines, Contractors/Sub Contractors/VendorsSupport during maintenance turnaround and start up. Participate in multidisciplinary team to identify/increase equipment availability. Develop MOC's to support production. Failures analyses. Support operation and maintenance to meet production.• Managed by projects until $4 millions.

Caracas - Venezuela

VENCEMOS, Cemex Group. Position: Project Engineer and I&C Senior Engineer. (March 1995 – May. 2001). Location: Caracas, Puerto La Cruz, Guayana, Maracaibo, and Barquisimeto. Description: Expansion of existing Facilities (Production Capacity was increased from 3.2 to 4.3 MM MT of Clinker Production from 1995 in 3 years). Project consisting of:• Development of Conceptual, Basic and Detail Engineering, construction, pre-commissioning, commissioning, start up and hand over.• Plant expansion and optimization.• Purchase of I&C instruments and equipments, PLC Systems, DCS Systems.• Supervision and management of engineers and construction staff.• Facilitating and participating in FAT and SAT coordination.• Provide supervision and direction to multiple engineering and construction projects.• Interface with Operations, Maintenance, Engineering, Purchaser, Expeditor, Contract, Construction, project scopes and execution to ensure operational integrity of field facilities.• Engineering, Procurement, cost control, construction management.• Working closely with outside engineering firms during the detailed engineering phase when was required. • Support during maintenance turnaround and start up. Participate in multidisciplinary team to identify/increase equipment availability. Develop MOC's to support production. Failures analyses. Support operation and maintenance to meet production.• Managed by projects until $1.2 millions.• Responsible for complete project life cycles, including requirements determination, technical planning, scheduling, design, engineering, FAT, SAT, implementation, and post-implementation support.

Shell – JANTESA. Position: Instruments and Control System Lead (1994 – 1995). Location: Caracas. Description: Shell West Urdaneta (Offshore and Onshore Facilities (45.000 BPD). Project consisting of:• Development of Basic and Detail Engineering.• Supervision of 8 engineers and designers.• Responsible for control, safety, fire and gas detection system, instrument specifications, all offshore facilities, package units.

Houston - Us & Caracas - Venezuela

Bechtel (Houston) – JANTESA. Position: I&C Leader and Designer (1992 – 1994). Location: Houston. Description: PARC (SRU Unit, Sour Water Treatment and Utilities. PDVSA Ex-Maraven). Project consisting of:• Development of Basic and Detail Engineering.• Supervision of 3 engineers and designers.• Responsible for control, safety, fire and gas detection system, instrument specifications, routing, junction boxes, cables trays, cables, all offshore facilities, package units, cause effects, ESD logic, control philosophy, instrument index, Hazop, What if.

Refineria El Palito - Venezuela

PDVSA (Ex-Corpoven) – JANTESA. Position: I&C Construction Supervisor (1990 – 1992). Location: Puerto Cabello. Description: Process Optimization – Refinery El Palito. Project consisting of:• Development of Basic and Detail Engineering, and Construction.• Supervision of construction. Responsible for fabrication and installation of field instruments, analyzers, junction boxes, cable trays, cables and construction activities during plant shutdown.

Caracas - Venezuela

PDVSA (Ex-Maraven) – JANTESA. Position: I&C Engineer (1989 – 1990). Location: Caracas. Description: New Tail gas Compressor – Existing Sulfur Plant – Cardon PDVSA. Project consisting of:• Development of Basic and Detail Engineering. • Responsible for instrument specifications, routing, junction boxes, cables trays, cables.