Chad X. Slater, P.E. (Tx, Ok, La, Ga, Al, Fl) Email & Phone Number

Houston, Tx, Us

Houston, Texas, Us

Responsible for the overall day-to-day operation of the Firm.Develop business relationship with Architects, Project Managers, Residential Builders, Commercial Developers, etc.Responsible for Payroll, Marketing, and Employee Development.Develop and Deliver Commercial and Residential Mechanical, Electrical, and Plumbing (MEP) DesignResidential Solar DesignElectrical Load Flow StudiesSubstation Design

London, England, Gb

Heavy/Lower Olefins Unit Electrical Engineer• Provide maintenance and troubleshooting support for failure of electrical equipment (HV and MV motors, switchgear, MCC motor starters, VFDs/ASDs, UPS systems, batteries, automatic transfer systems, protection devices, transformers, generators, cathodic protection, capacitors etc.) • Perform load flow, short circuit, coordination, motor starting and arc flash via SKM for area• Provide and maintain protective relay settings ( GE Multilins, Protect 4/4A, SEL 351/750, Basler, etc.) • Maintain list of projects or improvement initiatives for area• Initiate and implement improvements in area• Provide input into routine and capital planning• Provide technical input for major projects coming into area• Facilitated electrical Turn Around work activities • Issue Turn Around (TA) report (what was found, improvements made, and recommendation)• Review and manage test and inspection records• Write failure reports (5 Why) for area with recommended preventative actions• Lead RCA for complex failures in area• Maintain equipment list and PM templates in SAP for area• Setup new PM’s and condition monitoring test for area• Manage red-line backlog for area• Lead safety meetings• Shell's Electrical EEDG’s and DEP’s, National Electric Code, applicable IEEE and industry standards, OSHA subpart S requirements, and applicable NFPA and API standards.• Reliability practices including RCA, PM optimization, application of condition monitoring technologies.

London, England, Gb

• Lead projects for the installation EV Charging stations for use and research on the campus.• Function as project engineering lead for capital projects pertaining to 300 kW Microgridend development, project execution, and closeout. • Provided Run and Maintain support of Microgrid; 2-300kW BESS, 300kW of PV Panels, 250kW generator w/ test load.• Worked with BESS manufactures to help resolve issues with thermal run away.• Prepare basis for design.• Conducted due diligence and integrity evaluations. • Identify project risk and develop contingency plans. • Deliver project within set criteria for HSSE, schedule, budget and functionality.• Developed Microgrid sequences to ensure optimal and efficient.

London, England, Gb

• Responsible for delivery of the capital projects portfolio within the Shell Deer Park Chemicals Site.• Function as project engineering leadership for project teams through project identification, front end development, project execution, and closeout. • Develop project premise.• Drive business case development.• Prepare basis for design.• Conduct due diligence and integrity evaluations. • Identify project risk and develop contingency plans. • Deliver project execution plans. • Deliver project within set criteria for HSSE, schedule, budget and functionality.

London, England, Gb

Logistics and Sulfur Recovery Unit Electrical Engineer• Provide maintenance and troubleshooting support for failure of electrical equipment (HV and MV motors, switchgear, MCC motor starters, VFDs/ASDs, UPS systems, batteries, automatic transfer systems, protection devices, transformers, generators, cathodic protection, capacitors etc.) • Perform load flow, short circuit, coordination, motor starting and arc flash via SKM for area• Provide and maintain protective relay settings ( GE Multilins, Protect 4/4A, SEL 351/750, Basler, etc.) • Maintain list of projects or improvement initiatives for area• Initiate and implement improvements in area• Provide input into routine and capital planning• Provide technical input for major projects coming into area• Facilitated electrical Turn Around work activities • Issue Turn Around (TA) report (what was found, improvements made, and recommendation)• Review and manage test and inspection records• Write failure reports (5 Why) for area with recommended preventative actions• Lead RCA for complex failures in area• Maintain equipment list and PM templates in SAP for area• Setup new PM’s and condition monitoring test for area• Manage red-line backlog for area• Lead safety meetings• Shell's Electrical EEDG’s and DEP’s, National Electric Code, applicable IEEE and industry standards, OSHA subpart S requirements, and applicable NFPA and API standards.• Reliability practices including RCA, PM optimization, application of condition monitoring technologies.

London, England, Gb

• Perform load flow, short circuit, coordination, motor starting and arc flash for area• Provide and maintain protective relay settings • Maintain list of projects or improvement initiatives for area• Initiate and implement improvements in area• Provide input into routine and capital planning• Provide technical input for major projects coming into area• Facilitated electrical Turn Around work activities • Issue Turn Around (TAR) report (what was found, improvements made, and recommendation)• Review and manage test and inspection records• Write failure reports for area with recommended preventative actions• Lead RCA for complex failures in area• Maintain equipment list and PM templates in SAP for area• Setup new PM’s and condition monitoring test for area• Manage red-line backlog for area• Lead safety meetings• BP Electrical ETP’s and STP’s, National Electric Code, applicable IEEE and industry standards, OSHA subpart S requirements, and applicable NFPA and API standards.• Reliability practices including RCA, PM optimization, application of condition monitoring technologies. Power system modeling using SKM for ( short circuit, load flow, device evaluation, motor starting voltage drop, coordination, arc flash).

London, England, Gb

• Maintain MAT reliability and availability goals. • Maintain all site wide reliability work processes. • Maintain maintenance expenditures within area of responsibility. • Participate in Capital Value Process for projects and TAR.• Champion I&E safety across the site.• Ensure mechanical integrity program (critical alarms and trips) is maintained.• Lead engineer for TAR I&E scope development and execution.• Provide recommendations on worklists and budget estimates.• Develop engineering work packages (job notes) with drawings, specifications, and instructions on repairs utilizing corporate and site technical practices.• Provide maintenance support for daily unit issues• Assist with Front End Loading of small capital projects that are within their capabilities and time limitations.• Support management of change and process hazard analysis in assigned area• Support and lead as necessary incident investigations for areas of responsibility• Conduct studies and tests for repetitive maintenance problems and recommend solutions• Provide input on creating preventive and predictive maintenance processes and ensure compliance with those processes.• Review specific I&E equipment maintenance history and recommend changes to the preventive and predictive maintenance process.• Utilize information from databases to improve I&E equipment reliability.• Maintain and update I&E documentation including drawings, datasheets, equipment files, etc• Provide timely technical support for all groups in manufacturing area including maintenance, asset, optimization and process control.

Houston, Texas, Us

• Managed and engineer projects for three phase major underground electrical facilities serving large commercial and industrial customers.• Review and analyze customer submitted site plans, structural drawings, one-line diagrams, schematics, and load analysis.• Provide cost analysis and project optimization initiatives to customers for efficient project design.• Inspect customer field construction activities for compliance with National Electric Safety Code (NESC) and project design specifications• Perform detailed electrical power system calculations, including cable pull, motor start, voltage drop, relay settings, and fault current analysis.• Analyze customer electric loads in order to size and request major underground equipment. • Coordinate projects involving multiple departments, operations crews and contractors. • Responsible for rehabilitation/preventative maintenance of failed equipment.

Dallas, Tx, Us

• Developed test procedures for TI TMS320 DSP's for characterization with industry standards.• Mastered debug & test on Megatest Polaris/Vega, Fusion & VLCLT testers.• Developed well-planned test programs for new DRAM/RDRAM/SLDRAM devices and productization work.• Initiated subsystem scripts to reduce pattern/testcase generation.• Prepared TI Proprietary documents for device specifications.• Accomplished 95% yield improvement from 62% through strategic debugging.• Mentored Co-ops/Interns within group.• Represented the company as a Business Partner for the Texas Scholars Program.• Instrumental in the discovery of DAA tactile cell fails of device design.• Performed DSP life testing/burn-in as well as supported quality initiatives.

Honors & Awards: Graduate Of The Goldman Sachs 10Ksb; Alumni Ambassador

Bs, Electrical Engineering