Responsible for the design and optimization of new and existing compressors and large pumps. Ensuring all new company owned & contract rotating equipment is designed, procured & contracted within a timely manner and installations are accomplished within Chevron guidelines as well as meeting industry standards. Large portions of the job focuses on optimizing existing rotating equipment as well as reliability, efficiency, and maintenance practices to improve their operation. Act as the liaison between compression & pump vendors and our operations and facilities engineer groups on all rotating equipment related projects. Strong experience with performance modeling of high-speed reciprocating and rotary screw compressors in an upstream environment. Working knowledge of natural gas reciprocating engines and associated failure modes. Strong knowledge of Chevron and industry standards pertinent to the design of compression and centrifugal & positive displacement pumps. Knowledge of onshore oil and gas gathering and primary processing facilities. Demonstrated ability to communicate complex technical issues across a broad range of audiences, from O&M to senior leadership.

FE Unconventional Development (FEUD) - Standard Facilities upstream facility project execution and design support for MCBU Factory designed Centralized Tank Batteries, Compressor Stations and Saltwater Disposal Facilities.Roles & Responsibilities:• Planning and execution of 10+ upstream facilities projects over the course of 2019/2020. Effectively managed project cost, schedules and budgets totaling AFE responsibility to date of $35MM with additional $25MM responsibility for the rest of 2020 and going into the start of 2021.• Working knowledge of fundamental design and operation criteria for onshore equipment (i.e., piping, vessels, tanks, pumps, compressors, etc.)• Serving as Rotating Equipment SME, specializing in the control set points within each facility type “cause and effect”, as well as, sizing verifications for non-standard equipment.o Led Condensate Transfer Pump initiative, identifying gaps in current design & control philosophy. Initiated Global PMOC improving projects moving forward. Also resulted in capturing $500M in annual operation savings (currently trucking condensate) across Midland Basin, working with P&E and Process Optimization team to realize.o Leading current standard design “cause & effect” refresh for remaining projects moving into 2021. • Led 3D model reviews with Midland Basin operations teams to ensure stakeholder buy-in during multiple expansion projects.• Working understanding and application of upstream onshore industry standards, applicable Chevron CES and construction standards.• Demonstrated ability to frame, plan, define, track and manage facilities projects. Creation of Basis of Design documentation. Developed and reviewed AFC construction drawings & construction work packages (including technical, vendor packages, and location requirements).o Support of commissioning and final handover.• Working knowledge of Process Safety, Operational Excellence and project related MSW activities.

Focus towards supporting Facilities and Projects, Drilling & Completions Quality Assurance, as well as, implementing QA work processes to assure the quality of engineered equipment and materials for facilities and capital projects.Roles & Responsibilities:• Served as the OCTG SME, providing support to a set of BUs’ consisting of Chevron Nigeria, Australia BU (Gorgon Stage 2) and Tengiz (TCO). Led efforts to improve customer (Chevron BUs’) understanding of Quality Assurance processes.o A key stakeholder in the development of latest revisions of Chevron Engineering Standard DCM-SU-5272-A.• Quality Assurance oversight of D&C Casing & Tubing (OCTG) totaling $193 MM. Value creation established from equipment inspection in manufacturers' shops, ensuring compliance with Company Engineering Standards (CES), expediting to ensure on-time deliveries, and assistance in forming and improving supplier relationships. • ISO 9001:2015 Lead Auditor certification. Led multiple supplier qualification audit teams, periodic supplier audits, and / or quality incident investigations. Participated in supplier improvement initiatives.• QA SME critical feedback to BU’s for engineering deliverables and supplier documentation for compliance with QA requirements, clarity and completeness, incorporation of Chevron Engineering Standards, industry best practices, and NDE and testing processes required to ensure the quality of the resulting product. • Developed quality assurance plans and inspection assignment packages ensuring that suppliers’ products met all Chevron purchase order requirements (i.e. CES Requirements). • Led cross-functional Pre-Inspection Meetings (PIMs) when merited by equipment complexity or criticality setting clear expectations for Chevron suppliers and inspection teams.• Identified, selected, and managed qualified, local third-party inspectors in the execution of inspection assignments. Led inspection agency and inspector improvement initiatives.

• Serve as the single point of contact for a set of operating assets that require QA services. Lead efforts to improve customer understanding of QA processes; promote the use of QA services at the right time and in the right amount during the project or facility life cycle. • Encourage the identification and selection of suppliers who can provide high-quality products to Chevron. Lead supplier qualification audit teams, periodic supplier audits, and / or quality incident investigations. Participate in supplier improvement initiatives.• Interface with company subject matter experts to proactively resolve issues.• Review engineering deliverables and supplier documentation for compliance with QA requirements, clarity and completeness, incorporation of Chevron Engineering Standards, industry best practices, and NDE and testing processes required to ensure the quality of the resulting product.• Develop quality assurance plans and inspection assignment packages to provide assurance that suppliers’ products meet all Chevron purchase order requirements. Supervise / review the work product of others who develop these deliverables.• Plan and chair Pre-Inspection Meetings (PIMs) when merited by equipment complexity or criticality.• Identify, select, and manage qualified, local third-party inspectors in the execution of inspection assignments. Participate in inspection agency and inspector improvement initiatives.• Review inspection reports and associated data generated during production. Assist in the resolution of deviation requests, non-conformances, and other quality-related issues.• Lead the evaluation of suppliers and inspectors at the conclusion of each order, recording Lessons Learned for future orders and assignments.• Participate in initiatives to develop and / or improve QA work processes and increase QA competency and organizational capability throughout Chevron.

Rotating Equipment Engineer: Project assignments involved analyzing problematic (bad actors) along with critical rotating equipment in order to improve the MTBF. Key projects also included criticality rankings for asset strategies in rotating equipment.

Project Manager in 200+ commercial construction projects, majority ranging from $3MM-$5MM. Ultimately progressing to lead project manager, managing a cross-functional and multidisciplinary project team (5 direct reports), providing construction services for various clients in the domestic commercial real-estate business. Roles & Responsibilities:• Developed and reviewed procurement and construction specification packages (including technical, quality, and information requirements)• Led construction bid analyses and provided recommendations for materials/equipment selection. Interfaced and aligned with procurement personnel. • Reviewed and approved vendor submittals (drawings, calculations, etc.)• Developed and reviewed Inspection and Test Plans (ITPs) as part of equipment procurement specifications. Aligned and coordinated with third-party inspectors to execute inspection in accordance with the ITP during fabrication.• Led review / approval of Manufacturer data book submittals upon completion of equipment / material fabrication• Delivered input and built relationships through drafting team coordination. Delivered results for project drawing oversite deliverables.• Led internal 3D model reviews, and client milestone model reviews (30/60/90/100%)• Tracked, logged, and responded to fabrication and construction/installation Requests for Information (RFI’s)• Coordinated multi-disciplinary project efforts. Managed relationships and stakeholders both internally and with external client engineering / management personnel.

Project Consultant & Manager Structural Steel – Managed steel fabrication 0f Dubai Flower Center project $25MM at Dubai International Airport. My scope included project management, overseeing fabrication, as well as, managing complex relationships with several general contracting companies originating from various areas of the globe.Roles & Responsibilities:• Developed and reviewed steel procurement, fabrication and construction specification packages (including technical, quality, and information requirements).• Led fabrication and construction bid analyses. Provided recommendations for materials/equipment selection. Interfaced and aligned with procurement personnel. • Led internal 3D model reviews and client milestone model reviews.• Tracked, logged, and responded to fabrication and construction / installation Requests for Information (RFI’s).• Coordinated multi-disciplinary project efforts. Managed relationships and stakeholders both internally and with external client engineering / management personnel.

Project Manager within commercial flooring division. Gained experience on cross-functional and multidisciplinary project teams providing services for 50+ clients in the domestic commercial real-estate business. Roles & Responsibilities:• Developed and reviewed procurement and construction specification packages (including technical, quality, and information requirements)• Led construction bid analyses and provided recommendations for materials/equipment selection. Interfaced and aligned with procurement personnel. • Reviewed and approved vendor submittals (drawings, calculations, etc.)• Delivered input and built relationships through drafting team coordination. Delivered results for project drawing oversite deliverables.• Tracked, logged, and responded to fabrication and construction/installation Requests for Information (RFI’s)• Coordinated multi-disciplinary project efforts. Managed relationships and stakeholders both internally and with external client engineering / management personnel.

Iron Worker – Field Fabrication and Erection 60+ Commercial Steel BuildingsRoles & Responsibilities:• Delivering results through constructing/erecting structural iron for field projects as a individual contributor later growing capabilities and developing to a field foreman of ~ 10 direct reports at any given time. • Demonstrated strong ability to work safely in tough environments erecting structural, as well as, prefabricated steel buildings.