Craig Maddison Email & Phone Number
@siemens.com
LinkedIn matched
Who is Craig Maddison? Overview
A concise factual answer block for searchers comparing this professional profile.
Craig Maddison is listed as Gas Turbine Field Service Engineer at Holland-Controls B.V., a with 23 employees, based in Telford, England, United Kingdom. AeroLeads shows a work email signal at siemens.com and a matched LinkedIn profile for Craig Maddison.
Craig Maddison previously worked as AGT Controls and Mechanical Field Service Engineer at Siemens Energy and Gas Turbine Controls, Field Service Technician at Turbine Efficiency Group. Craig Maddison holds Higher National Certificate Hnc, Instrumentation And Control from Teesside University.
Email format at Holland-Controls B.V.
This section adds company-level context without repeating Craig Maddison's masked contact details.
AeroLeads found 1 current-domain work email signal for Craig Maddison. Compare company email patterns before reaching out.
About Craig Maddison
An industrious and highly experienced, Mechanical and EC&I engineer, with over 18 year’s experience in gas turbine, mechanical, electrical, hydraulic and control systems. Royal Air Force trained, with proven organisational skills, developed in complex and demanding engineering environments. Ability to prioritise and achieve objectives under harsh operational conditions, whilst ensuring professional standards are maintained. Extensive experience in the commissioning, overseeing and modification of complex installations, including subsequent on site staff training, in system operation and maintenance.
Listed skills include Military, Defense, Security Clearance, Military Experience, and 20 others.
Craig Maddison's current company
Company context helps verify the profile and gives searchers a useful next step.
Craig Maddison work experience
A career timeline built from the work history available for this profile.
Agt Controls And Mechanical Field Service Engineer
Installation, Commissioning and Fault Diagnosis of the Siemens AGT Range, A-20 and A-35. (Formerly Rolls Royce Avon and RB211).Installation, Commissioning and Fault Diagnosis of the Siemens SGT Range. SGT 100,200,300,400.Rapid mobilisation to site, both offshore and on land, to diagnose and rectify package shutdowns.Control System upgrade, retrofit and commissioning. (Mk2 Rustronic, Allen Bradley, S7, PCS7, FT125 and FT210)Cold and Hot Loop checking of… Show more Installation, Commissioning and Fault Diagnosis of the Siemens AGT Range, A-20 and A-35. (Formerly Rolls Royce Avon and RB211).Installation, Commissioning and Fault Diagnosis of the Siemens SGT Range. SGT 100,200,300,400.Rapid mobilisation to site, both offshore and on land, to diagnose and rectify package shutdowns.Control System upgrade, retrofit and commissioning. (Mk2 Rustronic, Allen Bradley, S7, PCS7, FT125 and FT210)Cold and Hot Loop checking of instrumentation. Installation and Commissioning of associated systems. (VSD, Pumps, Hydraulics, Motors, Actuators).Detailed borescope inspection of core engine and associated rotating equipment. Loading and configuration of Mk2, Allen Bradley, S7, PCS7, Det-tronics, Bently Nevada and Wonderware software. Gas Turbine and Gas compressor performance criteria monitoring and analysis.Carrying out of OEM defined service packages.Fuel Valve upgrade, installation and calibration.MJI 10,11,18,19COMPEX EX 01-04SBT 01Medium Risk Confined Space TrainedBOSIET and MIST Show less
Gas Turbine Controls, Field Service Technician
Installation, Commissioning and Fault Diagnosis of the Siemens SGT100-300 range (Mechanical / EC&I)Siemen’s Industrial Gas Turbines servicing for Power Generation and Mechanical Drive (Gas Compressor and Water Injection) applications.Rapid mobilisation to site, both offshore and on land, to diagnose and rectify package shutdowns.Control System upgrade, retrofit and commissioning.Cold and Hot Loop checking of instrumentation. Installation and Commissioning… Show more Installation, Commissioning and Fault Diagnosis of the Siemens SGT100-300 range (Mechanical / EC&I)Siemen’s Industrial Gas Turbines servicing for Power Generation and Mechanical Drive (Gas Compressor and Water Injection) applications.Rapid mobilisation to site, both offshore and on land, to diagnose and rectify package shutdowns.Control System upgrade, retrofit and commissioning.Cold and Hot Loop checking of instrumentation. Installation and Commissioning of associated systems. (VSD, Pumps, Hydraulics, Motors, Actuators). Test and Calibration of new and reconditioned parts.Remote Monitoring of customer sites, combined with early failure detection measures.Performing of vibration analysis and trim balance procedures. Detailed borescope inspection of core engine and associated rotating equipment. Loading and configuration of Allen Bradley Control Logix, Rustronic Mk2, Bently Nevada and Siemens S7 PLC software. Mapping and configuration of DLE, multilight and conventional fuel systems, for reliable ignition and safe continuous running throughout the operating range. Show less
Mechanical And Propulsion Aircraft Technician
Mechanical Aircraft Technician on FGR2 and Tmk3 Typhoon AircraftRectification and engineering operator on the Typhoon FGR4 and TMk3 aircraft.Qualified to work on armed aircraft and contributed to manning the UKs Quick Reaction Alert (Interception and Air Defence).Undertook the fault diagnosis of the aircraft hydraulic, mechanical, propulsion, fuel and structural systems and carried out subsequent component changes and testing.Qualified for the running of the… Show more Mechanical Aircraft Technician on FGR2 and Tmk3 Typhoon AircraftRectification and engineering operator on the Typhoon FGR4 and TMk3 aircraft.Qualified to work on armed aircraft and contributed to manning the UKs Quick Reaction Alert (Interception and Air Defence).Undertook the fault diagnosis of the aircraft hydraulic, mechanical, propulsion, fuel and structural systems and carried out subsequent component changes and testing.Qualified for the running of the aircrafts gas turbine engines (Dry Range and Reheat), secondary power systems and hydraulics for functional testing and fault analysis.Engine health monitoring, digital engine control and data set analysis qualified. Provided support to front line squadrons in structural repair and fault diagnosis.Provided specialist assistance to industry personnel in the development of improved procedures, rectification of factory build issues and in depth fault diagnosis.Proficient in use of aircraft documentation, both electronic and paper based.Conducted data analysis of aircraft Engine and Structural Health Monitoring system, to build profiles on aircraft faults. Show less
Visiting Aircraft Co-Ordinator
Visiting Aircraft Co-ordinator for multinational fixed and rotary wing aircraft.Ground handling of fixed and rotary wing aircraft; UK, Allied and International Forces.Liaison to Senior Management on engineering issues of visiting nations and aided in tooling procurement and technical assistance to foreign aircraft. Emergency Response Team member, for all aircraft incidents.
Flight Test Technician
Flight Test Technician and Aircraft ground runner on Harrier GR9/T12 aircraft.Undertook flight line servicing and ground handling, for the initial and subsequent flight testing of aircraft, post deep strip maintenance. Investigated and fault diagnosed post flight test issues, to facilitate the delivery of aircraft on schedule to the front line.Provided specialist debriefing and liaised with industry Field Service representatives.Qualified high and low power… Show more Flight Test Technician and Aircraft ground runner on Harrier GR9/T12 aircraft.Undertook flight line servicing and ground handling, for the initial and subsequent flight testing of aircraft, post deep strip maintenance. Investigated and fault diagnosed post flight test issues, to facilitate the delivery of aircraft on schedule to the front line.Provided specialist debriefing and liaised with industry Field Service representatives.Qualified high and low power engine operator.Undertook the implementation of Technical Instructions and Service Engineered Modifications under strict time constraints, including subsequent reports on issues and improvements.Management of engineering publications, ensuring adherence to correct amendment state. Show less
Mechanical And Propulsion Aircraft Technician
Aircraft Propulsion and Mechanical Technician on Merlin Mk3 and Mk3a helicopters.Rectification and engineering operator on the Merlin Mk3 helicopter.Ground handling and flight servicing.Four operational tours of Iraq, at main operating bases and isolated posts.Conducted aircrew debriefing to aid in fault diagnosis of Propulsion and Mechanical systems. Qualified in RTM 322 gas turbine deep strip and specialist borescope inspection. Qualified in… Show more Aircraft Propulsion and Mechanical Technician on Merlin Mk3 and Mk3a helicopters.Rectification and engineering operator on the Merlin Mk3 helicopter.Ground handling and flight servicing.Four operational tours of Iraq, at main operating bases and isolated posts.Conducted aircrew debriefing to aid in fault diagnosis of Propulsion and Mechanical systems. Qualified in RTM 322 gas turbine deep strip and specialist borescope inspection. Qualified in Non Destructive Inspection techniques on both engine and airframe components.Undertook the building of comprehensive spares packages in liaison with logistics personnel for UK and overseas deployments.Aircraft recovery team activities to facilitate the return of deployed aircraft to the UK.Assessment of battle damage and implementation of the subsequent expedient repair techniques. Show less
Colleagues at Holland-Controls B.V.
Other employees you can reach at holland-controls.com. View company contacts for 23 employees →
Mathew Lockwood
Colleague at Holland-Controls B.V.Greater Sheffield Area, United Kingdom
View →
BG
Bas G.
Colleague at Holland-Controls B.V.Greater Enschede Area, Netherlands
View →
EM
Eltun Mirzazade
Colleague at Holland-Controls B.V.Azerbaijan
View →
CS
Chris Scholte Lubberink
Colleague at Holland-Controls B.V.Hengelo, Overijssel, Netherlands
View →
WV
Wim Van Der Geest
Colleague at Holland-Controls B.V.Hengelo, Overijssel, Netherlands
View →
JM
James Melling
Colleague at Holland-Controls B.V.United Kingdom
View →
JB
Janine Brummer
Colleague at Holland-Controls B.V.Greater Enschede Area, Netherlands
View →
TE
Terente Eugen
Colleague at Holland-Controls B.V.Contact Info, United States
View →
AO
Alan Oldfield
Colleague at Holland-Controls B.V.Buxton, England, United Kingdom
View →
RW
Ruben Werker
Colleague at Holland-Controls B.V.Netherlands
View →
Craig Maddison education
Higher National Certificate Hnc, Instrumentation And Control
Advanced Modern Apprenticeship, Engineering
City And Guilds,, Level 3 Nvq In Aircraft/Component Maintenance, 2007., Pass
Btec Onc, Aeronautical Engineering, Merit
Education record
Frequently asked questions about Craig Maddison
Quick answers generated from the profile data available on this page.
What company does Craig Maddison work for?
Craig Maddison works for Holland-Controls B.V..
What is Craig Maddison's role at Holland-Controls B.V.?
Craig Maddison is listed as Gas Turbine Field Service Engineer at Holland-Controls B.V..
What is Craig Maddison's email address?
AeroLeads has found 1 work email signal at @siemens.com for Craig Maddison at Holland-Controls B.V..
Where is Craig Maddison based?
Craig Maddison is based in Telford, England, United Kingdom while working with Holland-Controls B.V..
What companies has Craig Maddison worked for?
Craig Maddison has worked for Holland-Controls B.V., Siemens Energy, Turbine Efficiency Group, Royal Air Force (Raf), and Royal Air Force.
Who are Craig Maddison's colleagues at Holland-Controls B.V.?
Craig Maddison's colleagues at Holland-Controls B.V. include Mathew Lockwood, Bas G., Eltun Mirzazade, Chris Scholte Lubberink, and Wim Van Der Geest.
How can I contact Craig Maddison?
You can use AeroLeads to view verified contact signals for Craig Maddison at Holland-Controls B.V., including work email, phone, and LinkedIn data when available.
What schools did Craig Maddison attend?
Craig Maddison holds Higher National Certificate Hnc, Instrumentation And Control from Teesside University.
What skills is Craig Maddison known for?
Craig Maddison is listed with skills including Military, Defense, Security Clearance, Military Experience, Operational Planning, Ministry Of Defence, Mod, and Aircraft.
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trialCheck these profiles if this is not the Craig Maddison you were looking for.
View similar profiles