Dan Dumitru Badea Email & Phone Number

Offshore Sabratha Eni- Mog

• Involved in operation and maintenance of the platform instrument equipment in field including PLC, DCS, F&G, ESD, HIPPS system.• Programming, testing and verifying all instruments at various plants investigating and remedying any anomalies.• Analyzing and improving process control structure to optimize the technological process on DCS and ESD system • Modifying and adjusting parameters to fine tune operations and investigating faults to minimize downtime and wastage on a wide… Show more • Involved in operation and maintenance of the platform instrument equipment in field including PLC, DCS, F&G, ESD, HIPPS system.• Programming, testing and verifying all instruments at various plants investigating and remedying any anomalies.• Analyzing and improving process control structure to optimize the technological process on DCS and ESD system • Modifying and adjusting parameters to fine tune operations and investigating faults to minimize downtime and wastage on a wide range of instrument equipment. • Follow-up & up-date the engineering drawings, P&ID, Control Charts Loop Drawings and Logic Drawing for all instruments• Follow daily the preventive maintenance work orders and corrective work order in MAXIMO system• Preparing daily PTW (cold, hot, override) including task risk composition, “tool-box” talks for instrument team.• Working with next instruments: Yokogawa, ABB, Rotork , Krohne, Fisher Rosemount, ,Emerson , Massoneilan ,Siemens, smart transmitters (level ,pressure, temperature, flow), DCS ( type ABB-TENORE) and for Fire & Gas detection system .Gas compressor Nuovo Pignone , Air compressors Ingersoll Rand, GTG- generators SIEMENS (TCM-system Mark II) Show less

Onshore Libya Total Mabruk Phase 4

• Involved in operation and maintenance of the plant instrument equipment in field including PLC, DCS and ESD system.• Designing and implementing intensive training programs for local personnel.• Programming, testing and verifying all instruments at various plants investigating and remedying any anomalies.• Analyzing and improving process control structure to optimize the technological process on DCS and field, • Modifying and adjusting parameters to fine tune operations and… Show more • Involved in operation and maintenance of the plant instrument equipment in field including PLC, DCS and ESD system.• Designing and implementing intensive training programs for local personnel.• Programming, testing and verifying all instruments at various plants investigating and remedying any anomalies.• Analyzing and improving process control structure to optimize the technological process on DCS and field, • Modifying and adjusting parameters to fine tune operations and investigating faults to minimize downtime and wastage on a wide range of instrument equipment. • Follow-up & up-date the engineering drawings, P&ID, Control Charts Loop Drawings and Logic Drawing for all instruments• Follow the preventive maintenance work orders and troubleshooting in GMS (Global management system).• Preparing the cold and hot PTW for instrument team.• Preparing the inhibition form for all safety devices during the intervention Show less

Mabruk Phase Iv Libya

Involved in operation and maintenance of the plant instrument equipment in field including PLC, DCS and ESD system.• Designing and implementing intensive training programs for local personnel.• Programming, testing and verifying all instruments at various plants investigating and remedying any anomalies.• Analyzing and improving process control structure to optimize the technological process on DCS and field, modifying and adjusting parameters to fine tune operations and… Show more Involved in operation and maintenance of the plant instrument equipment in field including PLC, DCS and ESD system.• Designing and implementing intensive training programs for local personnel.• Programming, testing and verifying all instruments at various plants investigating and remedying any anomalies.• Analyzing and improving process control structure to optimize the technological process on DCS and field, modifying and adjusting parameters to fine tune operations and investigating faults to minimize downtime and wastage on a wide range of equipment. • Preventive maintenance for all instrumentation part and recalibration all the devices.• Follow-up the engineering drawings, P&ID, Control Charts Loop Drawings and Logic Drawing for all instruments.• Tested and calibrate Fire & Gas system like gas detectors CH4, toxic gas detector H2S.flame detector, smoke detector, heat detector and aragonite system. Show less

Nigeria Oml58 Obagi

Contractor and Subcontractors coordination with regards of their daily activities (electric, instrumentation and telecom works); Monitor work progress in accordance with the submitted work schedule Attend meetings and advice Contractor and Subcontractors the priorities to be taken in consideration. Explain to Contractor and Subcontractors their responsibilities and Scope of Work that matters with his Extend of Work if conflicts arise Keep daily activity progress record and log… Show more Contractor and Subcontractors coordination with regards of their daily activities (electric, instrumentation and telecom works); Monitor work progress in accordance with the submitted work schedule Attend meetings and advice Contractor and Subcontractors the priorities to be taken in consideration. Explain to Contractor and Subcontractors their responsibilities and Scope of Work that matters with his Extend of Work if conflicts arise Keep daily activity progress record and log any problems that may exist for immediate actions Checking the Instrumentation deliverables prior to submission to ensure that all design requirements are met and fit for purpose. Responsible of the Design, Detail Engineering, construction and commissioning for Instrumentation & Control System. Responsible for all Engineering Specification of all instruments and control systems in full compliance to licensor(s). Contractor’s QA/QC supervising with regards of instrumentation and telecom works Prepare draft sketches if some modification work has to be done on site. Monitor Site Works of Contractor and Subcontractors to make sure about complying with Construction drawings, Quality and HSE requirements Show less

Libya Mabruk Phase Iv

• Commissioning and start up activities for the CPTL, activity consisted of loop checks as per DCS & ESD design and loop check folders management. Check the content of the pre-commissioning and commissioning dossiers carried-out by the Contractor. Follow-up of the Instrument and System functional test in line with commissioning procedures, in lines with the Company’s specifications, as well the Operational Test, performed by the Contractor. Compile and report all punch list… Show more • Commissioning and start up activities for the CPTL, activity consisted of loop checks as per DCS & ESD design and loop check folders management. Check the content of the pre-commissioning and commissioning dossiers carried-out by the Contractor. Follow-up of the Instrument and System functional test in line with commissioning procedures, in lines with the Company’s specifications, as well the Operational Test, performed by the Contractor. Compile and report all punch list. Calibration ,loop checking, commissioning of, solenoid valve, pressure, flow, level and temperature transmitters, controllers control valve, shutdown valves, blow-down valves. Show less

Nigeria Soku Lgsp De-Bottleneking

Commissioning and start up activists for the SHELL , activity consisted of loop check as per DCS & ESD design and loop check folders management. The object of loop testing is to prove that all components are full operational order and ready for start up. Calibration ,loop checking, commissioning of, solenoid valve, pressure, low, level and temperature transmitters,… Show more Commissioning and start up activists for the SHELL , activity consisted of loop check as per DCS & ESD design and loop check folders management. The object of loop testing is to prove that all components are full operational order and ready for start up. Calibration ,loop checking, commissioning of, solenoid valve, pressure, low, level and temperature transmitters, controllers control valve, shutdown valves, blow down valves. Calibration and testing of the field instruments with HART Communicator and Field bus type 375 Field Communicator Show less

Nigeria Yoho Oil Field -Offshore

Commissioning and start up activities for the Exxon Mobil, responsible for undertaking instruments inspections in line with P&ID, C&E and loop diagrams. The object of loop testing is to prove that all components are full operational order and ready for function test procedure.… Show more Commissioning and start up activities for the Exxon Mobil, responsible for undertaking instruments inspections in line with P&ID, C&E and loop diagrams. The object of loop testing is to prove that all components are full operational order and ready for function test procedure. Assisting the system engineering team to quickly diagnose and repair DCS and ESD fault for instrument tuning, calibration and reparation. Site inspection: non conformance reports and punch lists. Working with the vendor for GE gas turbine/ NUOVO PIGNONE. Familiarization & handle the system MARK V. Calibration, loop checking, commissioning of, solenoid valve, pressure, flow , level and temperature transmitters ,controllers, control valve, shutdown valves, blow down valves. Calibration and testing of the field instruments with HART communicator type 375 Field Communicator. Working with next instruments: Fisher Rosemount smart transmitters (level pressure, temperature, flow, and control valve), DCS Emerson (Delta V), Field bus system, Turbines (Allen Bradley), Siemens CP-35 Fire safety system and Ingersoll-Rand compressor Show less

Conpet -Romania

Involved in Romanian National Crude Oil Transport System Rehabilitation (implementation of SCADA Automation System in CONPET pumping stations). Attending to the following training’s: basic presentation of SCADA system, ABB transmitter ASD 800, ABB communicator STT 04, Smart Vision basic programming, Hart communicator 375, VEGA pulse radar, SAAB Tank Radar REX, Liehberr WIOM, Litronic-FSM, and ROTORK. Preparing of pre-commission loop test dossiers. Site inspections: punch… Show more Involved in Romanian National Crude Oil Transport System Rehabilitation (implementation of SCADA Automation System in CONPET pumping stations). Attending to the following training’s: basic presentation of SCADA system, ABB transmitter ASD 800, ABB communicator STT 04, Smart Vision basic programming, Hart communicator 375, VEGA pulse radar, SAAB Tank Radar REX, Liehberr WIOM, Litronic-FSM, and ROTORK. Preparing of pre-commission loop test dossiers. Site inspections: punch lists, non conformance reports. Calibration and testing of the field and control room instruments and marshalling cabinet termination. Loop tests, instrumentation testing (leakage detection, checking of electrical connections, instrument cable testing), cabinets checking, final approvals Show less

Romania-Ploiesti

Involved in pre-commissioning, commissioning, start-up, operation and maintenance of the refinery instrument equipment.Designing and implementing intensive training programs for personnel. Analyzing and improving process control structures to optimize the technological process. Implementing new equipment maintenance (programmable logic controllers,smart, transmitters , controllers, recorders: Foxboro , Yokogawa ,Masoneilan , Honeywell… Show more Involved in pre-commissioning, commissioning, start-up, operation and maintenance of the refinery instrument equipment.Designing and implementing intensive training programs for personnel. Analyzing and improving process control structures to optimize the technological process. Implementing new equipment maintenance (programmable logic controllers,smart, transmitters , controllers, recorders: Foxboro , Yokogawa ,Masoneilan , Honeywell , Norbro , Enraf, Mobrey Klockner-Moeller and other apparatus).Testing control process systems during normal operation condition Show less

Romania Ploiesti

Loop Check Activities. Configuring SMART Transmitters using Fisher Rosemount. Installing &Testing Smart Transmitters for Pressure, Differential Pressure, Flow, Level.Checking all the Interlock Sequence in the Power Plant .In charge with calibration, adjusting loops .Carry out procedures for shut-down, checking cause & effect- matrix, in accordance with P&ID, logic & loop diagrams. Performing shut-down and start-up tests for Shut-Down Valves controlled Watching up all settings made for… Show more Loop Check Activities. Configuring SMART Transmitters using Fisher Rosemount. Installing &Testing Smart Transmitters for Pressure, Differential Pressure, Flow, Level.Checking all the Interlock Sequence in the Power Plant .In charge with calibration, adjusting loops .Carry out procedures for shut-down, checking cause & effect- matrix, in accordance with P&ID, logic & loop diagrams. Performing shut-down and start-up tests for Shut-Down Valves controlled Watching up all settings made for the instruments on compressors (pressure switchers, levels, flows, temperatures) in accordance with the project requirements.Involved in the overhauling of all the gas analyzing systems, calibrating of transducers (YOKOGAWA, BAILEY, etc.). Concerned also with the overhauling of the ignition valves (gas and fuel oil), the igniters, burners photocells, etc. Executing control room work, checking of programming PLC’s, smart controllers.Ensuring Maintenance and Repair activities for conventional and digital instrumentation. Work experience with Fisher – Rosemount and Foxboro transmitters, Fisher, Masoneilan and Honeywell compressors with Det Tronics flame detectors. Performing the maintenance , calibration and installation of the instrumentation equipment (transmitters, recorders, controllers, control valves, shut-off valves, I/P converters, interlocking systems) for various plants: Atmospheric and Vacuum Distillation Unit, Catalytic Reforming Unit, Gases Fractionation, Hydrofining Units, Catalytic Cracking, gases Desulphurization.Reading wiring diagrams (P&ID), labels, maps, instruction manuals, tuning control loops, programming smart instrumentation.Verified and start-up interlocking systems. Show less