Dan Mccutcheon Email & Phone Number

Point Of Rocks, Md, Us

Point Of Rocks, Md, Us

Livermore, California, Us

Project Manager for the installation of specialty process systems (i.e., fluids and gases) for construction projects serving the pharmaceutical and semiconductor industries. Oversees and directs all aspects of the construction schedule from planning, installation, commissioning, and close-out activities.

United States, Us

Construction Manager for the Mechanical, Electrical, and Plumbing (MEP) scope of work for the Concourse A/B Connector and Baggage Handling System (BHS) project at the Baltimore/Washington International (BWI) Thurgood Marshall Airport. This project consisted of a Construction Manager At-Risk (CMAR) Guaranteed Maximum Price (GMP) contract of approximately $400 million. Responsible for execution of the prime contract including technical and managerial leadership. Lead for communication and coordination with the Maryland Aviation Authority (MAA), architect / engineer, and subcontractors. Managed project schedule, submittals, requests for information, applications for payment, and change orders. Oversaw and directed Building Information Modeling (BIM), quality control, and commissioning activities.

Reston, Virginia, Us

Engineering support for a test facility expansion at Arnold Engineering Development Complex (AEDC), Arnold Air Force Base, Tennessee. Aided both construction and design engineering.  Construction duties included assistance with preconstruction activities, construction procedure development, construction quantities and schedule development, planning / logistics, and constructability reviews.  Design engineering duties included responsibility for the mechanical design for real property which consisted of potable water, sanitary water, fire protection, and HVAC systems.

Winchester, Virginia, Us

Project Manager for medium to large-scale commercial construction projects in Virginia. Established and managed all aspects of the construction process from planning through delivery. Oversaw and directed all preconstruction, construction, commissioning, and close-out activities. Developed construction budget and schedule and ensured adherence to all contractual requirements. Principal roles and responsibilities included:- Responsible for execution of the prime contract for construction including the technical and managerial leadership. Lead for communication and coordination with the client, architect / engineer, subcontractors, and local government authorities.- Supervised project superintendents, project coordinator, foreman, and subcontractors for compliance with project safety, quality, schedule, and budget.- Managed project schedule, submittals, requests for information, applications for payment, change orders, and permits.PROJECT EXPERIENCE:• Mondelez Global, Richmond Bakery Expansion, Richmond, VA Guaranteed Maximum Price (GMP) cost plus contract for a design-build project of a $17 million, 69,040 square-foot production facility expansion in Richmond, VA. • City of Richmond, River City Middle School, Richmond, VA Construction Manager At-Risk (CMAR) GMP contract for construction of a $55 million, 290,000 square-foot new two-story middle school in Richmond, VA.• Loudoun County Public Schools, Lightridge High School, Aldie, VA Fixed Price contract for construction of a $111 million, 282,064 square-foot new two-story high school in Aldie, VA.

MECHANICAL GROUP SUPERVISOR:Group supervisor of the mechanical discipline for the Wylfa Newydd Nuclear Power project. This is a new build consisting of two Advanced Boiling Water Reactor (ABWR) units to be located in Wales, UK. The scope of the project includes several Balance of Plant (BOP) systems and structures.- Assigns work for eleven (11) engineers. - Manages deliverables in accordance with scope, budget, and schedule. - Responsible for technical oversight which includes review and approval of calculations, drawings, and design documents. - Involved daily with joint venture (JV) and client interface on status, to resolve design issues, and development of the design.EARLY PROJECT DEVELOPMENT:First mechanical representative on project. Led the development of mechanical scope, budget, and schedule for the entire project.- Demonstrated company capabilities and gained trust with our JV partners. This resulted in obtaining more scope for the project.- Worked with JV partners to establish common design practices and approaches.- Developed the mechanical staffing plan.- Contract management.TURBINE ASSESSMENT:Involved with the technical and commercial assessments for selection of the steam turbine for the project.

SENIOR NUCLEAR ENGINEER:Senior engineer on design change packages for the Southern Nuclear Company (SNC) operating nuclear power plants (Edwin I. Hatch Nuclear Plant, Joseph M. Farley Nuclear Plant, and Alvin W. Vogtle Electric Generating Plant). - Developed budget and schedule for design change packages, including preparation of the contract work orders- Determined design approach and scope of major plant modifications through studies, analyses, and walkdowns- Continued role as technical subject matter for dry spent fuel storageEXPERIENCE:- Preparation of specification for refueling machine replacement at Alvin W. Vogtle Electric Generating Plant. This included involvement with vendor and equipment selection.- Led the flooding re-evaluation for all SNC plants (e.g., probable maximum flooding and probable maximum precipitation analyses). This included coordination with technical staff (hydrology), the client, and with the NRC.- Led and also prepared calculations for emergency action levels (EAL) for all SNC plants based upon revised NEI guidance. These calculations set the established limits for notification to the NRC and/or public in regards to either a liquid or gaseous release from an accident.- Performed studies for the replacement of the control room HVAC equipment, turbine building chillers, and water treatment system at Joseph M. Farley Nuclear Plant.- Lead mechanical / nuclear engineer for the Alvin W. Vogtle Electric Generating Plant large ISFSI expansion project.- Involved in radiation monitor replacement for all SNC plants.

MECHANICAL / NUCLEAR GROUP SUPERVISOR:Group supervisor of the mechanical / nuclear discipline for Alvin W. Vogtle Electric Generating Plant Units 1 and 2 for Southern Nuclear Company (SNC). - Assigned work for five (5) engineers performing design change packages. - Managed deliverables in accordance with scope, budget, and schedule. - Responsible for technical oversight which included review and approval of calculations, drawings, and design documents. - Involved daily with client interface on deliverable status, to resolve design issues, and development of new work.PROJECT LEAD:Project lead for the Vogtle Electric Generating Plant (VEGP) Units 1 and 2 Independent Spent Fuel Storage Installation (ISFSI) project. This project consisted of all changes to the plant and site to accommodate processing and storage of dry spent fuel in concrete casks. This included oversight for all disciplines on all associated design change packages in regards to scope, budget, and schedule.- Technical subject matter expert for 10 CFR 72 or dry spent fuel storage, including licensing through 10 CFR 72.48 screening / evaluations.- Led the safety analyses for the ISFSI installation on site. This included fire / explosion hazards and radiological release / dose to public hazards.NEAR-TERM TASK FORCE TEAM MEMBER:Selected and participated as a team member for the flooding walkdowns and evaluations for VEGP Units 1 & 2 to support NRC Near-Term Task Force (NTTF) Recommendation 2.1 and 2.3 as a result of the Fukushima-Daiichi nuclear accident.

MECHANICAL LEAD RESPONSIBLE ENGINEER:Led multi-discipline design change packages for modifications to Southern Nuclear Company (SNC) operating nuclear power plants (Edwin I. Hatch Nuclear Plant, Joseph M. Farley Nuclear Plant, and Alvin W. Vogtle Electric Generating Plant). - Performed industry operating experience reviews- Applied industry codes and standards (ASME B&PV Code Section III)- Reviewed plant licensing basis' and performed applicability determinations and 10 CFR 50.59 screenings / evaluationsSYSTEM DESIGN EXPERIENCE:Involved in system design, equipment selection, and/or calculations for:- HVAC- Fluid hydraulics and pumps- Fire protection- Radioactive waste disposal / treatment and dry spent fuel storage- Overhead material handling equipment

Gillingham, United Kingdom, Gb

LEAD PRODUCT ENGINEER: Lead engineer for an innovative mechanical drive technology for automotive HVAC. New product is used on a small car global platform consisting of over a million produced a year for five years encompassing approximately $8 million for current awarded business. Technology also proposed for future pursuits and business.

Fishers, Ny, Us

Assisted in BETA development and validation of new robotic overhead material handling equipment.

Bergen, New York, Us

Created and applied testing for design validation to ASTM, NEMA, IP, UL and CSA specifications.

Us

Directed a half million dollar a year cost reduction project for container refrigeration products used in the inter-modal shipping industry. Project consisted of relocation and elimination of components with an emphasis on a new design using alternate materials.

Port Washington, New York, Us

Originated equipment for a manufacturing process and implemented new designs to existing equipment while concentrating on lean.

Chantilly, Va, Us

Conducted and supervised field inspections of major structural construction with regards to the project drawings, specifications, geotechnical reports and submittals. These include:- Foundations - Concrete - Steel- Soil - Asphalt

Bachelor Of Science - Bs, Mechanical Engineering

General Studies