AeroLeads people directory · profile
Daniel Boon Email & Phone Number
Vice President
at
GEV Group
1 work email found
@gevgroup.com
2 phones found area 790
LinkedIn matched
✓ Verified May 2026
4 data sources
Profile completeness 100%
Who is Daniel Boon? Overview
A concise factual answer block for searchers comparing this professional profile.
Quick answer
Daniel Boon is listed as Vice President at GEV Group, based in Austin, Texas, United States. AeroLeads shows a work email signal at gevgroup.com, phone signal with area code 790, and a matched LinkedIn profile for Daniel Boon.
Daniel Boon previously worked as General Manager at Gev Group and Senior Account Manager - Blade Repair and Substrate Protection at Gev Group. Daniel Boon studied at Waltham Toll Bar.
Company email context
Email format at GEV Group
This section adds company-level context without repeating Daniel Boon's masked contact details.
{first}.{last}@gevgroup.com
86% confidence
AeroLeads found 1 current-domain work email signal for Daniel Boon. Compare company email patterns before reaching out.
Profile bio
About Daniel Boon
www.gevwindpower.com / www.blade247.comThe General Manager of GEV Wind Power LLC responsible for the successful leadership and management of the US wind power organisation according to the strategic plan set by the GEV Group Management TeamAn exceptionally professional and experienced background in Blade Repair and Surface Coatings Repair enabling expert technical authority to all technicians, with detailed and technical support ensuring clients demands and quality requirements are met on time and to a higher standard than expected.Technical ExperienceBlade Repair - Siemens blade B, C and D•Leading/Trailing edge repairs and full rebuilds.•Structural repairs to internal webbing.•Full core material repairs and replacements•Full tip rebuilds.•Winglet replacement.•Basic to Advanced composite fibre repairs.•Lightening Protection System & Powercurve inspection & repairs•Blade bearing replacements.•Blade balance weight block installation and replacements.•Full documentation, NCR, Corrective action experienceCoatings Repair•Abrasive blasting using plastic & dry media such as Type V- Acrylic, Aluminium oxide & Garnet to: Steel/Titanium/Composite/Aluminium• Spray application of various 2 pack coatings such as Abrasion resistant, Erosion resistant and Heat resistant coatings: Polyurethane/Epoxy/Acid Etch Primers/Cellulose/Acrylic•Performing coating inspection testing•Creating and recording paint specification•Removal of coatings using mechanical and chemical techniques•Compiling inspection reports and test plansdaniel.boon@gevwindpower.com
Listed skills include Inspection, Wind Turbines, Rope Access, Turbines, and 39 others.
Current workplace
Daniel Boon's current company
Company context helps verify the profile and gives searchers a useful next step.
10 roles
Daniel Boon work experience
A career timeline built from the work history available for this profile.
Vice President
Current
Aug 2019 - Present
General Manager
Current- Develop an annual operational plan for the US wind power business
- Ensure that the operations of the organisation meets the expectations of its clients
- Oversee the efficient and effective day-to-day operation of the organisation
- Draft policies for the approval of the Management Team and prepare procedures to implement the organisational policies
- Oversee the planning, implementation and evaluation of the organisation's products, delivery and services
- Ensure that all products, delivery of maintenance and services offered by the organisation contributes to the organisation's mission
Nov 2016 - Present
Senior Account Manager - Blade Repair And Substrate Protection
- Global account manager for the following clients during wind turbine mechanical/electrical, rope access, blade repair and substrate protection activities:
- EON Energy Services - U.S.
- EON Climate and Renewables - Globally
- MHI Vestas - Europe
- Vestas - Globally
- Nordex/Acciona - Globally
May 2015 - Dec 2016
Rope Access/Blade Repair Manager
- Managing day to day rope access/blade repair & coating repair activities
- Creating Project Quality Plans, Inspection and Test Plans including coating repair procedures
- Technical support for rope access, blade technicians & coating technicians
- Final QA/QC for Rope Access Blade Repair and Coating Repairs
- Produce non-conformance & corrective action reports
- Ensuring all company H&S, quality & environmental procedures are followed
Aug 2014 - May 2015
Rope Access Wind Turbine Blade Technician And Siemens Spot On Metal Repair
- Inspection of wind turbine Blades, Hub, Nacelle and Towers, recording and reporting any damage including NCR procedures and completing blade reports
- Composite fibre repair of wind turbine blades and hubs including Blade B, C and D repairs: - Leading edge composite fibre repairs and full rebuilds.-Trailing edge composite fibre repairs and full rebuilds.-Structural.
- Raising and completing of blade repair related documentation
- Preparation and recoating of all protective coatings to specific DFT requirements using Epoxy and Polyurethane paint
- Supervision of all aspects of wind turbine painting and responsible for multi-agency and nationality personnel
- Daily tasks also include performing and recording Steel Temp, Air Temp, Dew Point, Humidity, Wet film and Dry Film Thickness tests.
Oct 2011 - May 2015
Rope Access Coatings Supervisor
- Writing and collating of all Rope Access Transition Piece coating repairs-Safety Method Statements-Risk Assessments-Rope Access Rescue-COSHH Assessments-Project Quality Plans-Coating Method Statements-Inspection & Test.
- Recruitment of IRATA technicians for project.
- Sourcing and organising all Rope Access equipment for project and compiling databases.
- Planning daily activities liaising with site and project management
- Creating permit requests, acceptance & closing of permits
- Supervision and coating inspection of 3 coat process coating repairs to Offshore Transition Piece IAW NORSOK M-501 Edition 6 standards inspection:-Cleanliness to Sa2.5-Salt testing-Dust particle testing-90v Holiday.
Jun 2014 - Apr 2015
Wind Turbine Painter
- Carrying out offshore inspection of protective coatings to all areas of offshore wind turbines including blades and internal hub.
- Offshore Preparation and recoating of all protective coatings to specific DFT requirements using Epoxy and Polyurethane paint
Jun 2011 - Sep 2011
Offshore Rope Access Painter/Blaster
- Rope Access paint surface preparation of substation frame work using Grit Blasting and Mechanical techniques achieving SA2.5 - ISO 8501-1
- Rope access Paint application 4 coat process using Airless spraying and brush application techniques achieving C5M - ISO 12944 with Epoxy and Polyurethane coatings
Sep 2011 - Oct 2011
Aircraft Paint Surface Finish Supervisor
- Carrying out Major, Minor and Primary servicing paint restoration to aircraft and associated aircraft components focusing predominantly on Typhoon carbon fibre GRP and lightweight metal alloy components.
- Maintaining, servicing and correct usage of various abrasive blasting equipment, blast cleaning to SA2.5, Abrasive blasting using plastic & dry media such as Type V- Acrylic, Aluminium oxide & Garnet.
- Performing Dust test and surface profile testing post blasting
- HVLP, Airless, Pressure pot & gravity fed spray application of coating to correct WFT and DFT requirements-Epoxy-Polyurethane-Cellulose-Acrylic-acid etch
- Performing climactic condition tests, WFT, DFT and holiday tests of coatings, Viscosity testing of paint products during mixing stage
- Composite carbon fibre, copper fibre and Honeycomb reinforced structure repairs to aircraft components
Apr 1999 - Jun 2011
1 education record
Daniel Boon education
-
Waltham Toll Bar
FAQ
Frequently asked questions about Daniel Boon
Quick answers generated from the profile data available on this page.
What company does Daniel Boon work for?
Daniel Boon works for GEV Group.
What is Daniel Boon's role at GEV Group?
Daniel Boon is listed as Vice President at GEV Group.
What is Daniel Boon's email address?
AeroLeads has found 1 work email signal at @gevgroup.com for Daniel Boon at GEV Group.
What is Daniel Boon's phone number?
AeroLeads has found 2 phone signal(s) with area code 790 for Daniel Boon at GEV Group.
Where is Daniel Boon based?
Daniel Boon is based in Austin, Texas, United States while working with GEV Group.
What companies has Daniel Boon worked for?
Daniel Boon has worked for Gev Group, Offshore Painting Services Ltd, Rbg, and Royal Air Force (Raf).
How can I contact Daniel Boon?
You can use AeroLeads to view verified contact signals for Daniel Boon at GEV Group, including work email, phone, and LinkedIn data when available.
What schools did Daniel Boon attend?
Daniel Boon studied at Waltham Toll Bar.
What skills is Daniel Boon known for?
Daniel Boon is listed with skills including Inspection, Wind Turbines, Rope Access, Turbines, Renewable Energy, Working At Height, Onshore, and Wind.
Find 750M verified contacts
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trial