AeroLeads people directory · profile
Daniel Meyers, Gdtp Email & Phone Number
GD and T Trainer, Part-time (1099)
at
QC Training Services
1 work email found
@qctraininginc.com
LinkedIn matched
✓ Verified Jun 2026
4 data sources
Profile completeness 100%
Current company
Role
GD and T Trainer, Part-time (1099)
Location
Kokomo, Indiana, United States
Company size
Who is Daniel Meyers, Gdtp? Overview
A concise factual answer block for searchers comparing this professional profile.
Quick answer
Daniel Meyers, Gdtp is listed as GD and T Trainer, Part-time (1099) at QC Training Services, a company with 14 employees, based in Kokomo, Indiana, United States. AeroLeads shows a work email signal at qctraininginc.com and a matched LinkedIn profile for Daniel Meyers, Gdtp.
Daniel Meyers, Gdtp previously worked as GD&T Trainer, Part-time (1099) at Qc Training Services and Semi Retired at Grace Design & Tolerance Llc. Daniel Meyers, Gdtp holds Bass Performance from Berklee College Of Music.
Company email context
Email format at QC Training Services
This section adds company-level context without repeating Daniel Meyers, Gdtp's masked contact details.
*@qctraininginc.com
71% confidence
AeroLeads found 1 current-domain work email signal for Daniel Meyers, Gdtp. Compare company email patterns before reaching out.
Profile bio
About Daniel Meyers, Gdtp
Career Highlights: -ASME certified Senior GD&T Professional (#S-0126, S09-8348) specializing in tolerance (variation) analysis, GD&T training/mentoring/applications for nuclear reactor internals and automotive products-Helped build GD&T training program (Basic GD&T, Advanced GD&T and Tolerance Stacking) for Westinghouse University; achieved IACET certification for Basic course.-Member of John Maxwell Team for leadership training, mentoring, coaching & public speaking-Conducted 2D and 3D tolerance analysis on Westinghouse AP1000 nuclear reactor internals for 5 years and auto electronics products over 20 years-For Delphi, helped build 12-course GD&T/dimensional management training program, reaching over 2200 employees with fundamentals training-Chaired Delphi Corporate Dimensional Management Team for 12 years; member of Delphi Engineering Peer Review Board for 5 yearsSpecialties: Geometric Dimensioning & Tolerancing (MIL-STD-8C, USASI Y14.5-1966, ANSI Y14.5-1973, ANSI Y14.5M-1982, ASME Y14.5M-1994, ASME Y14.5-2009)-GD&T training & mentoring-2D & 3D Tolerance Analysis (VSA, VisVSA)-Dimensional Management process-Checker: mechanical drawings & design
Listed skills include Gd&T, Engineering, Mechanical Engineering, Geometric Dimensioning And Tolerancing, and 27 others.
Current workplace
Daniel Meyers, Gdtp's current company
Company context helps verify the profile and gives searchers a useful next step.
Qc Training Services
12 roles · 19 years
Daniel Meyers, Gdtp work experience
A career timeline built from the work history available for this profile.
Gd&T Trainer, Part-Time (1099)
Current
Oct 2020 - Present
Semi Retired
Current
Grace Design & Tolerance Llc
Re-entry into workforce
Mar 2020 - Present
Dimensional Engineering Mentor Specialist
Effective Training Inc., An Sae International Company
I've been training ETI "Fundamentals of GD&T" (1994 and 2009), 16, 20 & 24-hour courses, "Tolerance Stacks Using GD&T" and new 2009 "Critical Concepts of Tolerance Stacks" course. Also taught "Engineering Drawing Requirements", "Applications of GD&T", "Fundamentals of GD&T for Inspectors" and "ASME Y14.5M-1994 to Y14.5-2009 Comparison". I'm now helping.
Mar 2015 - Mar 2020
Dimensional Engineering Mentor Specialist
GD&T training content development; delivery of various ASME Y14.5 GD&T training classes.
Mar 2015 - Mar 2020
Sr Value Engineer, Gd&T Consultant, Tolerance Analyst
Conducted 2D & 3D tolerance analysis for reactor internals; Building & delivering GD&T training program for Westinghouse. Contract was terminated Feb. 27, 2015.
Feb 2012 - Feb 2015
Senior Designer/Documentation Checker
Worked here just long enough to meet some Defense Department budget cuts!
Nov 2011 - Feb 2012
President
Grace Design & Tolerance Llc
Tolerance analysis and GD&T consultation/checking
2007 - 2012
~5 yrs
Senior Project Manager
Navsea 04P
Under contract: Provided GD&T expertise for ship & submarine valve assemblies; created inspection charts to validate GD&T on older valve families; wrote process with illustrations for defining critical, major and minor characteristics on assemblies.
Nov 2010 - Jul 2011
Gd&T And Dimensional Management Mentor For Nuclear Reactor Internals
Westinghouse Energy Center
Under contract: Checked and analyzed Westinghouse internal reactor assemblies and reactor vessel parts. Performed 3D tolerance analysis on the reactor internal Guide Tube Assembly, the Guide Tube Checking Gauge Assembly and compared two generations of Fuel Spider Assemblies to ensure clearance through Guide Tubes.
Jun 2009 - Nov 2010
Senior Gd&T Professional
Delphi Electronics & Safety, Inc.
I started as a mechanical designer. Then I worked my way into tolerance analysis (using VSA, then VisVSA). I got my ASME GDTP certification in 1997, so I was the local GD&T expert too.
Aug 1990 - Feb 2009
Drafter, Designer, Checker, Customer Liaison
Various Contract Engineering Firms
* 1989-90 Tool designer: plastic injection molds on Autocad* 1987-89 Designed hydraulically-actuated electronic fuel injector for Caterpillar (for Navistar engines)* 1985-87 Under contract to Delco Electronics, designed radio steering wheel controls & HVAC parts* 1983-85 Under various contracts in Detroit: designed Chevy engine parts & checked ATM part.
Jan 1977 - Aug 1990
Team & coworkers
Colleagues at QC Training Services
Other employees you can reach at qctraininginc.com. View company contacts for 14 employees →
CG
Courtney Grismore
Colleague at Qc Training ServicesMcclelland, Iowa, United States, United States
View →
NS
Nehal Sheth
Colleague at Qc Training ServicesMaple Grove, Minnesota, United States, United States
View →
GD
Gordon Dace
Colleague at Qc Training ServicesSparta, Wisconsin, United States, United States
View →
LG
Laurie Grismore
Colleague at Qc Training ServicesOmaha Metropolitan Area, United States
View →
Courtney Grismore
Colleague at Qc Training ServicesMcclelland, Iowa, United States, United States
View →
NS
Nehal Sheth
Colleague at Qc Training ServicesMaple Grove, Minnesota, United States, United States
View →
GD
Gordon Dace
Colleague at Qc Training ServicesSparta, Wisconsin, United States, United States
View →
LG
Laurie Grismore
Colleague at Qc Training ServicesOmaha Metropolitan Area, United States
View →
3 education records
Daniel Meyers, Gdtp education
Bass Performance
Associate, General Education
Lincolnland Comm. College Springfield Il
Associates, General Education
Lincolnland Community College
FAQ
Frequently asked questions about Daniel Meyers, Gdtp
Quick answers generated from the profile data available on this page.
What company does Daniel Meyers, Gdtp work for?
Daniel Meyers, Gdtp works for QC Training Services.
What is Daniel Meyers, Gdtp's role at QC Training Services?
Daniel Meyers, Gdtp is listed as GD and T Trainer, Part-time (1099) at QC Training Services.
What is Daniel Meyers, Gdtp's email address?
AeroLeads has found 1 work email signal at @qctraininginc.com for Daniel Meyers, Gdtp at QC Training Services.
Where is Daniel Meyers, Gdtp based?
Daniel Meyers, Gdtp is based in Kokomo, Indiana, United States while working with QC Training Services.
What companies has Daniel Meyers, Gdtp worked for?
Daniel Meyers, Gdtp has worked for Qc Training Services, Grace Design & Tolerance Llc, Effective Training Inc., An Sae International Company, Sae International, and Westinghouse Electric Company.
Who are Daniel Meyers, Gdtp's colleagues at QC Training Services?
Daniel Meyers, Gdtp's colleagues at QC Training Services include Courtney Grismore, Nehal Sheth, Gordon Dace, and Laurie Grismore.
How can I contact Daniel Meyers, Gdtp?
You can use AeroLeads to view verified contact signals for Daniel Meyers, Gdtp at QC Training Services, including work email, phone, and LinkedIn data when available.
What schools did Daniel Meyers, Gdtp attend?
Daniel Meyers, Gdtp holds Bass Performance from Berklee College Of Music.
What skills is Daniel Meyers, Gdtp known for?
Daniel Meyers, Gdtp is listed with skills including Gd&T, Engineering, Mechanical Engineering, Geometric Dimensioning And Tolerancing, Cad, Sheet Metal, Unigraphics, and Fmea.
Find 750M verified contacts
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trial