Daniel P. Couture, P.Eng., Dfe, Fec Email and Phone Number
Daniel P. Couture, P.Eng., Dfe, Fec work email
- Valid
- Valid
- Valid
Daniel P. Couture, P.Eng., Dfe, Fec personal email
Daniel is Principal of the Metallurgical and Mechanical Engineering Group at Arcon Engineering Consultants Ltd,, working since 2003 with a client base from the legal profession and the insurance sector. He was qualified as an expert witness before the Ontario Superior Court in Metallurgical and Mechanical Systems; Oil Supply Equipment; Collision Reconstruction; and Human Factors. He was appointed Vice President of the National Academy of Forensic Engineers (NAFE) in January 2024, after being elected Director at Large in January 2020 and serving three consecutive terms. , Daniel became a Senior Member of the Academy in 2021. He is a Diplomate Forensic Engineer (DFE) certified by the Council on Engineering and Scientific Specialty Boards.Peer-Reviewed Publications:+ Forensic Engineering Investigation of a High-Voltage Transmission Line Anchor Shackle Failure - Journal of the National Academy of Forensic Engineers, 39(1) https://doi.org/10.51501/jotnafe.v39i1.65+ Forensic Engineering Investigation of the Catastrophic Breakdown of a Diesel Engine in an Emergency Generator Set. Journal of the National Academy of Forensic Engineers, 37(1). https://doi.org/10.51501/jotnafe.v37i1.99+ Forensic Engineering Investigation of a Furnace Oil Supply Line Fitting Leak NAFE Journal 2019; 36(1): 1-11) https://doi.org/10.51501/jotnafe.v36i1.136+ Forensic Engineering Investigation of a Fatal Farm Tractor Incident NAFE Journal 2018; 35(2): 13-22 https://doi.org/10.51501/jotnafe.v35i12.58+ Forensic Engineering Analysis of Traffic Signal Timing and Speeds Prior to Collision by Rule-Based Triage of Indirect Video NAFE Journal 2017; 34(1): 1-25 https://doi.org/10.51501/jotnafe.v34i1.39+ Forensic Engineering Analysis of an Apartment Freezing Sequence Using Heat Flow Equations - NAFE Journal 2023; 39 (2). https://doi.org/10.51501/jotnafe.v39i2.135.Peer-Reviewed Technical Presentations:+ Using Experimental Design Techniques in the Field - NAFE Conference, Daytona Beach, January 2024 + Forensic Engineering Investigation of a Self-Unloading Boom Collapse on a Great Lakes Freighter with Shawn Jay, P.Eng. - NAFE Conference Technical Seminar, Colorado, July 2019 + Using Novel Ultrasonic Technique to Determine Fitness for Service of FRP Equipment, with Case studies, with Geoff Clarkson, P.Eng. - NAFE Conference, Buffalo, July 2018
Arcon Forensic Engineers
View- Website:
- arconforensics.com
- Employees:
- 13
-
Principal Mechanical And Metallurgical Forensic EngineerArcon Forensic Engineers May 2003 - PresentRichmond Hill, On, Canada Area+ responsible for receiving mandates, assigning resources, pursuing investigations, developing conclusions from evidence using scientific methods and engineering principles, and writing technical reports for clients in the insurance and legal services industries.+ Principal, Metallurgical and Mechanical Group+ qualified as an expert witness before the Ontario Superior Court.+ redesignated as a Consulting Engineer in 2016+ Board Certified Diplomate in Forensic Engineering by the National Academy of Forensic Engineers, DFE
-
Vice PresidentNational Academy Of Forensic Engineers - Nafe Jan 2024 - PresentUnited States And CanadaAppointed to Vice President for 2024 after being first elected by the Academy to represent Fellows, Senior Members, Members, and Associate Members at the Board, for the 2020 session, and wrapping up in December 2023. -
VolunteerAstm Commitee E58 Forensic Engineering 2004 - 2020
-
Membre Et BénévoleClub Canadien De Toronto 1996 - 2018
-
Member, Professional Engineers Awards Organizing CommitteeOntario Society Of Professional Engineers 2002 - 2016
-
Volunteer Press OfficerBarrie Rugby Football Club 1997 - 2005
-
Manager, Production & Inventory ControlAsa Alloys Jun 2000 - Mar 2003+ responsible for annual, semi-annual and perpetual inventory control, reconciliation and valuation for 5000 tonne holdings of stainless and specialty steels in bar and rolled product form, with 7500 SKU`s.+ continued Canada-wide customer technical coverage, including failure analysis, and material choice solution suggestions in stainless steel and specialty metals.+ represented the owner on the new headquarters and master warehouse building project (65,000 sq. ft., $5M), coordinating and defining flexible requirements with the general contractor on-site, and vetting project completion documents with the consulting engineer, delivering on-time and under budget constraints.+ installed and commissioned 3000 tonne capacity Kasto Unicompact Honeycomb 7600 automated storage and dispensing system, including training of operating personnel.+ administered eleven direct reports in quality control, systems, transportation, credit and accounts receivable.+ liaison with overseas suppliers to defend technical integrity of products.+ responsible for ISO 9002-1994 standard compliance and maintenance through three audit cycles.+ reviewed major creditworthiness decisions and collection strategy with the Credit Manager.
-
Technical DirectorAsa Alloys Inc Jun 1996 - May 2000+ provided bilingual metallurgical and technical assistance to 5500 customers on a Canada-wide basis. for the largest independently-owned specialty metal distribution and service centre.+ supervised technical training programmes and competence testing for new employees.+ outside sales responsibility highlighted by growing a territory from $1M to $1.5M per annum in two years under highly competitive market conditions.
-
PrincipalThe Improvement Strategist Sep 1992 - May 1996+ won the contract for, designed and delivered a 60-hour Hazardous Wastes course for 30 adult students at St. Lawrence College, Kingston, which was hailed as best course in the program.+ upgraded knowledge of manufacturing experimental design techniques and methods, at the postgraduate level (with first class standing), with emphasis on process improvement.+ critiqued business plans for earning potential and risk with a participative venture capitalist.+ performed process improvement work in manufacturing, PEO Certificate of Authorization 1513084+ composed convincing business plans for small and medium-sized enterprises (SME's). + developed and co-produced a cost management video for the Ontario Ministry of Municipal Affairs as a founding member of Partners for Public Improvement, PfPI, a private consortium working with municipal governments.
-
Co OwnerPfpi 1992 - 1995
-
Research AssociateQueen'S University Plant Physiology Group Feb 1991 - Sep 1992+ employed computer and data acquisition board technology in a design for an open flow gas exchange system, used to study the biochemistry of nitrogen fixation in legume rhizomes.
-
MetallurgistCn Rail Technical Research Centre Dec 1989 - Jan 1991+ used SEM and image analysis during metallurgical failure investigations in a railway context, on steel, cast iron and aluminum components.
-
On-Site Technical AdvisorBiological Expedition To Tuvinskaya And Hakasskaya, Ussr Jul 1989 - Nov 1989+ executed Siberian expedition logistics plan with minimal external support.
-
Chief MetallurgistAlcan Lapointe Works Dec 1987 - Dec 1988+ improved continuous-casting aluminium alloy rod mill quality of product through innovative application of knowledge to casting belt metallurgy and process control instrumentation. + increased production levels from 50,000 to 63,000 tonnes per annum.+ responded rapidly to customer complaints of both technical and non-technical nature.+ through extensive workplace usage at a high technical level, improved French fluency.+ exchanged technical information with a Japanese multinational under a liaison program.+ budgeted for department overhead and formulated research plan expenditures.
-
Supervisor, Technical Resources GroupAlcan, Saint-Maurice Works Apr 1985 - Nov 1987+ supervised technologists and engineers in both quality assurance and research laboratories.+ composed and promoted Requests for Funds Allocation.+ oversaw a complex environmental dossier and ensured site compliance to laws.+ set up CSA Z299 quality programmes for wire-drawing, cable-making and casting installations.+ trouble-shot drawbenches, stranders, twisters, orthotically wound welding spoolers, and extruders during plant start-up phases.+ proposed design improvements to an innovative cable-twisting machine’s parameters to increase efficiency.
-
Research AssistantQueen'S University Mar 1983 - Apr 1985+ performed research into High Density Polyethylene deformation to solve a natural gas pipeline failure dilemma, leading to a Master’s Degree. -
Technical Service RepresentativeDupont Canada Fibres Group Aug 1980 - Mar 1983+ enforced product standards and specifications at manufacturing sites.+ assisted with implementation of market penetration plan for aramid fibres in the tire industry.+ learned about synthetic fibre production and technology of engineered rubber composites, including training on spinning machinery, weaving systems, moulded rubber products, and extruded polymers.+ presented technical seminars and marketing briefs to large groups of co-workers and clients.
Daniel P. Couture, P.Eng., Dfe, Fec Skills
Daniel P. Couture, P.Eng., Dfe, Fec Education Details
-
Metallurgical Engineering
-
Materials Science And Engineering -
Base Borden Collegiate InstituteOntario Scholar 1976 -
St. Patrick'S High School, Arvida, QcGeneral Matriculation
Frequently Asked Questions about Daniel P. Couture, P.Eng., Dfe, Fec
What company does Daniel P. Couture, P.Eng., Dfe, Fec work for?
Daniel P. Couture, P.Eng., Dfe, Fec works for Arcon Forensic Engineers
What is Daniel P. Couture, P.Eng., Dfe, Fec's role at the current company?
Daniel P. Couture, P.Eng., Dfe, Fec's current role is Consulting Forensic Engineer at Arcon Engineering Consultants Ltd - Vice President at National Academy of Forensic Engineers (NAFE).
What is Daniel P. Couture, P.Eng., Dfe, Fec's email address?
Daniel P. Couture, P.Eng., Dfe, Fec's email address is co****@****tico.ca
What schools did Daniel P. Couture, P.Eng., Dfe, Fec attend?
Daniel P. Couture, P.Eng., Dfe, Fec attended Queen's University, Western University, Base Borden Collegiate Institute, St. Patrick's High School, Arvida, Qc.
What skills is Daniel P. Couture, P.Eng., Dfe, Fec known for?
Daniel P. Couture, P.Eng., Dfe, Fec has skills like Engineering, Materials, Manufacturing, Failure Analysis, Metallurgy, Program Management, Steel, Process Improvement, Testing, Training, Budgets, Business Process Improvement.
Who are Daniel P. Couture, P.Eng., Dfe, Fec's colleagues?
Daniel P. Couture, P.Eng., Dfe, Fec's colleagues are Adam King, Stephen Hawken, Ram Haddad, Iaai-Cfi®(V)🔥, Dfe, P.e., P.eng..
Free Chrome Extension
Find emails, phones & company data instantly
Aero Online
Your AI prospecting assistant
Select data to include:
0 records × $0.02 per record
Download 750 million emails and 100 million phone numbers
Access emails and phone numbers of over 750 million business users. Instantly download verified profiles using 20+ filters, including location, job title, company, function, and industry.
Start your free trial