Dan Duggan Email & Phone Number

Dublin, IE

Dunboyne, County Meath, Ireland

• Project Manager overseeing the design, manufacture, and commissioning of bespoke and proprietary plastic welding equipment, with special emphasis on the medical, pharmaceutical, and automotive industries. Large complex.
• Relocated to the Republic of Ireland to take on position managing all projects within the Irish facility based just outside Dublin, necessitating a confident and… Show more Project Manager overseeing the design.
• Relocated to the Republic of Ireland to take on position managing all projects within the Irish facility based just outside Dublin, necessitating a confident and informed approach to integrating into a different.
• Sole Project Manager responsible for circa €6m annual portfolio, mainly covering Europe and the Americas and all associate time differences.
• Acted as main focal point for all departments, including sales, design, controls, manufacturing and technical; both within the local facility and other units globally.
• Direct customer contact for a wide range of projects, from small bread and butter orders up to large international multi-machine projects each worth in excess of €1m.

St Albans, England, United Kingdom

Marlow, Buckinghamshire, United Kingdom

• Project engineer in a company specialising in lifting equipment for the automotive, aerospace, construction, and other specialist industries.
• Cradle to grave project management. Producing quotes, site surveys, data packs, overseeing design buy off, manufacture, FATs, installation, SATs and invoice payments.
• Extremely commercially aware, from producing quotations to ensuring cash flow passed through finance.
• Managed a portfolio of upwards of 50 projects of differing sizes and… Show more Project engineer in a company specialising in lifting equipment for the automotive, aerospace, construction, and other specialist.
• Managed a portfolio of upwards of 50 projects of differing sizes and stage, with a total value exceeding £2 million at any one time.
• Overseen design teams to produce bespoke designs to highly complex challenges.

Consett

• Short term contract within the aerospace industry. Employed to upgrade the Standard Operation Procedures of a manufacturer of aerospace components.
• Rapidly engaged with person’s company-wide to collate vital information and produce results in a very short period of time.
• Redesigned the Standard Operation Procedure process to allow for full traceability, compliance and quality assurance requirements.
• Gained an understanding of the machining and general requirements utilised in… Show more Short term contract within the aerospace industry. Employed to upgrade the Standard Operation Procedures of a manufacturer of.
• Gained an understanding of the machining and general requirements utilised in the manufacture of stringers, struts, beams and other aircraft wing components for clients such as Airbus and Embraer.
• Worked tirelessly to garner information pertaining to the correct and safe methods for utilising very large machines such as 45 metre SNK milling machines and Mazak CNC.

Surbiton, Surrey

• Senior project management role within a small, highly specialised company providing industrial environmental dust extraction systems to the construction industry, to the correct ATEX standards.
• Demonstrated commitment by relocating from the North East of England to London, to work in a small, close knit team where the ability to work well with others was paramount..
• Worked away in various regions of the UK on site for extended periods of time to ensure that projects were completed… Show more Senior project management role within a small, highly specialised company providing.
• Worked away in various regions of the UK on site for extended periods of time to ensure that projects were completed to the satisfaction of the client.
• Provided industrial filtration systems to the biomass industry, mainly the Immingham and Liverpool port sites that take receipt of biomass destined to the Drax Power station. Both multi-million pound projects within.
• Overseen the expediting of suppliers, delivery to site, installation by subcontractors and all associated on site documentation such as RAMS etc.

Sunderland, United Kingdom

• Temporary contract to project manage design changes within a fast moving and demanding global automotive engineering company and the customer’s manufacturing facilities.
• Responsible for the interpretation and introduction of design changes, as specified by the offsite design department and by the client.
• Co-ordination of tasks across cross-functional teams, including design, production, purchasing and quality.
• In control of the design change with in two manufacturing sites… Show more Temporary contract to project manage design changes within a fast moving and demanding global automotive engineering company and the customer’s.
• In control of the design change with in two manufacturing sites and the introduction of those changes to Nissan Manufacturing.
• Following an extremely demanding time scale for introduction of changes to an unforgiving and demanding production facility where any delays are unacceptable. Show less

Newcastle Upon Tyne, United Kingdom

• Project management and design of high profile metal forming projects for key clients for the company’s future business portfolio.
• Designed new tooling, with accurate geometric tolerancing, for a highly specialised manufacturing process which only a small number of businesses, globally, are capable of undertaking.
• Engaged with providing a client facing relationship to the high standard the client, Rolls-Royce, would expect, to all the correct standards, including SABRe… Show more Project management and design of high profile.
• Engaged with providing a client facing relationship to the high standard the client, Rolls-Royce, would expect, to all the correct standards, including SABRe 2.
• Worked closely in conjunction with other departments within the company, especially production and sales to develop a manufacturing process for products for the nuclear and aerospace industries.
• Took a hands-on, can do attitude with any manufacturing that was required to ensure that any products were produced to a high standard and to increase communication between departments.

Sunderland, United Kingdom

• Performed as a Product Applications Engineer within a globally renowned pump manufacturing facility, enabling the introduction of new products, constant improvement of existing products and problem solving where.
• Accountable for the correct introduction of product variations and upgrades for a number of separate products and the related production lines, including all BOMs, routings, costings and transfer prices.
• Used SAP software to manage all aspects of the products… Show more Performed as a Product Applications Engineer within a globally renowned pump manufacturing facility, enabling the introduction of new products.
• Used SAP software to manage all aspects of the products, for which I was responsible, from an engineering and commercial point of view, including all levels of subassemblies.
• Dealt with a demanding sales force to provide timely and accurate product variants to meet with clients exacting standards.
• Designed new engineered commodities using high end CAE software, Catia for design, Enovia for product management and SAP for global access.

Newcastle Upon Tyne, United Kingdom

• Engaged within a world class research and development department managing various projects and over seeing specialist high capability technical teams.
• Responsible for the organisation of the entire department’s multi-million pound budget and expenditure, including reporting to executive levels in the UK and Paris.
• Specialised in the area of Arctic exploration and development. Involving the development and qualification of umbilicals to allow use in this highly demanding environment… Show more Engaged within a world class.
• Specialised in the area of Arctic exploration and development. Involving the development and qualification of umbilicals to allow use in this highly demanding environment. Environmental issues and cost reduction.
• Took ownership of the production of a blue sky prototype consisting of all the cutting edge technology currently under development.
• Carried out professional presentations to a trans-national seminar of global experts in a specialist field, overcoming any cultural and language barriers to successful transfer of information. Show less

North Shields

• Employed within a project department to design high specification modules for the oil industry and to manage the day to day running of client specific trading orders.
• Required to design manifold systems and associated pipework to client specifications and to the relevant NORSOC and API standards required.
• Use of AutoCAD Mechanical 3D to an exceptionally high standard to produce detailed drawings and schematics for in house and external use.
• Overseen the employ of third party… Show more Employed within a project department to design high specification modules for the oil industry and to manage the day to day running of client specific trading orders.
• Overseen the employ of third party certification of various client based projects to ensure the correct standards and requirements for clientele.
• Accountable for dealing with large numbers of trading orders of values up to several hundred thousand pounds to high profile clients such as DSME, Samsung, NOV as well as many others.

Washington

• Worked in a specialist company manufacturing industrial flue systems with in the commercial department co-ordinating the installation of bespoke flue systems.
• Responsible for production of accurate quotations for numerous high profile customers, often requiring rapid turn around.
• Carried out detailed site surveys to enable the collation of important data required to produce detailed system designs.
• Design specific flue systems with the customer’s requirements at the forefront… Show more Worked in a specialist company manufacturing industrial flue systems with in the commercial department co-ordinating the.
• Design specific flue systems with the customer’s requirements at the forefront of the proposal.
• Receive technical inquiries from members of the public, various technical bodies and engineering consultancies in need of specialist knowledge.

Gateshead

• Operated on a short notice contract to help eliminate several months backlog of architectural plans.
• Utilised ParaCAD design package and digitiser to convert drawings from incompatible systems.
• Calculated heat transfer equations with specialist in-house computer system.
• Was responsible for the training of staff to a high level of competency in the use of CAD systems.

North Shields

• Occupied within a small research and development team, in conjunction with an experienced design manager, improving the build quality and manufacturing process of advanced emergency pressure release equipment.
• Design of new parts, testing and analysis of products for market and certification, as well as dealing with external suppliers.
• Specific tasks included the implementation of a 3D CAD system; the introduction of an improved design to ATEX standards and collation of data to… Show more Occupied within a small research and development team, in.
• Specific tasks included the implementation of a 3D CAD system; the introduction of an improved design to ATEX standards and collation of data to ensure a new flagship product fulfilled design specifications.
• Gained extensive experience of Microsoft Office applications and a multitude of engineering design packages (Expert on AutoCAD, SolidWorks).
• Responsible for designing a new manufacturing system to extend the companies product range and technical capabilities. Show less

Bachelor Of Engineering (Beng), Computer Aided Engineering, Pass

Mechanical Engineering discipline, specialising in the use of modern engineering computer systems. (SolidWorks, ParaCAD, EdgeCAM.

Btec Ond, Mechanical & Manufacturing Engineering, Pass With Merits & Distinctions.

Distinctions in calculus, mathematics and design. Merits in science, manufacturing and environmental studies.

A-Levels, Maths, Physics, Design.

9 Gcse'S, Gcse'S