Please complete the CAPTCHA to continue
@woodward.com
✓
2 phones found area 586
✓
LinkedIn matched
A concise factual answer block for searchers comparing this professional profile.
David Doak is listed as Senior Mechanical Systems Engineer at Woodward Governor, based in Sterling Heights, Michigan, United States. AeroLeads shows a work email signal at woodward.com, phone signal with area code 586, and a matched LinkedIn profile for David Doak.
David Doak previously worked as SENIOR MECHANICAL ENGINEER at Bae Systems Gsd and Principle MEch Engr at Self Employed. David Doak holds Mba??, Global Business Strategy, It, Ops Research, Telecom from The University Of Texas At Dallas - School Of Management.
This section adds company-level context without repeating David Doak's masked contact details.
AeroLeads found 2 current-domain work email signals for David Doak. Compare company email patterns before reaching out.
Defense, Aerospace, NASA, and various government agency Program Management, Project Engineering, Systems Engineering, Requirements Analysis, Modeling and Simulation, all phases(start-to-delivery to customer including on-site integration and test in customer's platform) of electromechanical, electronics, RF, Radar, EO-IR, systems and subsystems for armored combat vehicles, UAV's, older vehicle up-armoring, airborne fixed wing and rotary wing platforms, satellites, naval surface ships and submarines. Skilled at leading teams, performing conceptual and detailed FEA, CFD, thermal, modal, safety, modeling and simulation, MTBF, FMECA analyses and detailed trade studies. Adept at using Earned Value systems for cost and schedule control, WBS generation, proposal writing, Systems requirements allocation and traceabilitySpecialties: Program/Prolect Management, Systems engineering(per DOD-5000.2), requirements analysis and traceability, trade studies, WBS, CIDS, PIDS generation via DOORS, CAE, CFD, FEA, , 3-D solid modeling, IPT member, Interface control drawings technical budget of requirements such as power and weight to various system elements and cost&schedule adherence. SW tools include Pro/Engineer, UG-NX4, SolidWorks, ANSYS WB 12/ANSYS 12, NASTRAN, Various CFD codes, Patran FEAMAP, MS OFFICE, PROJECT MathCAD and more
Listed skills include Finite Element Analysis, Computatinal Fluid Mechanical, Electro Mechanical Packaging, Solidworks, and 35 others.
Company context helps verify the profile and gives searchers a useful next step.
A career timeline built from the work history available for this profile.
Fort Collins, Co, Us
Electro-mechanical packagingexecuting ANSYS WB Random Vibration and Thermal Analysis, and Environmental Lab Shake and Bake Testing of control systems for engines for aerospace, ground vehicle and shipboard platforms
Executed requirements analysis, space claim studies, Stress, vibration, shock, thermal-fluid analysis of liquid cooled radar, sensor and other electronics subsystems for FCS FMRV turret mounted equipment. Developed coolant distribution piping network preliminary design and analysis-parallel flow distribution network. Size, weight, routing analysis and tracking for these key requirements. Utilized PRO/E Wildfire 3.0, IntraLink 3.3/3.4, ANSYS 11.0, SINDA/FLUENT and other thermal-fluid analysis tools, MS Office, VISIO and Outlook.; Participated in several IPT's and Working Groups including thermal architecture IPT, FMRV IPT, ECS, interface with requirements IPT.Implemented trade study for software codes for performing piping stress and thermal-fluid analysis
East Aurora, Ny, Us
FEA analysis on control systems for FCS program, Airbus & Boeing commercial aircraft control systems and Air Force strike fighter platforms
Us
Performed electronics Packaging, System and subsystem level ANSYS modal and Stress analysis, thermal using ANSYS and BetaSoft generated reports and design review packages, provided B&P support for Block II, Inct 1 Servo MC Systems for the FCS program.Analyzed structural and thermal integrity of military and commercial (A350, A400, 787) Aerospace Servo Applications.Performed trouble shooting on qual. test units for vibration and thermal failure. Originated and implemented corrective action.Executed trade studies for composites utilization, lightening strike mitigation and engineering process development
Us
Developed 3-D Solid models for Vibration, Shock, Stress and Thermal Analysis(toolset included PRO/E, ANSYS and NASTRAN). Generated PowerPoint Presentations for NASA Goddard reviews on the HST and STIS upgrades and other NASA Goddard Programs.Received and incorporated feedback from Shuttle Crews, creating major improvements in tools used to install SS cargo bay equipment
Developed gamma ray & neutron detectors/portals (Advanced Spectrographic Portals (ASP's)) and handheld detection devices.Executed Mechanical Engineering, Advanced Electronics Packaging and ANSYS analysis from a Systems Engineering focus. Coordinated the efforts of three subcontractors: Raytheon, Thermo-Electron and Canberra RF, EO-IR and Sensor systems. Performed Subject Matter Expert level design/FEA analysis activities for mechanical parts and components, physical interface of components, EMI/RFI, tolerance analysis and systems integration studies.IPT interface for current and developing technical issues related to mechanical. Provided representation at DHS-DNDO status meetings.
Us
Started in St. Hts GDLS Thermal and propulsion group asigned to the FCS common chassive, MGV andC2V Powertrain, Propulsion and NBC functionsTransferred to WTC Woodbridge, VA Jan 2005 to work FCS Systems Requirements Engineering areas-suspension system, embedded training, modeling and simulation
Us
Started as a Contractor and Went Direct in Jan 2005)Developed Conceptual and trade studies as IPT member on the FCS (Future Combat System) manned ground vehicles (C2V, RSV and MGV), mission modules, subsystems, LAV-25 turret upgrades & variants & other armored combat vehicle systems & proposals.Implemented subsystem (as an IPT member) development and requirements analysis, allocation and UML modeling (Propulsion, Suspension, ECS, NBC and Water Gen, Fire Suppression) including: space claims, weight allocation/tracking, power requirements/ heat dissipation tracking, NBC duct sizing/routing, airflow requirements, routing and cost account planning.Performed stress analysis on shipboard systems, electronic enclosures, tested vehicle mounted military mechanical systems for HMMWV and other platforms using PRO/E, ANSYS/ANSYS Workbench, MathCAD, SIMULINK, COSMOS and ADAMS/DADS, and CFD codesPerformed system design and analysis trade studies for selecting one of three competing engine configurations (Gas-electric, Dual Turbines and all gasoline engines. Front to back concepts analysis new approach designs based on weight and environmental requirements. Successful completion was determined during a presentation to senior management and customers. Final reports written, approved and vaulted analysis utilizing FLOWTRAN and involved in fan size selection for circuit card cooling.
Columbus, Ohio, Us
Mainly Columbus HQ with Some time at the Aberdeen facility writing proposals for US Army's Aberdeen Proving Grounds activitiesColumbus role was in Mechanical system group on military and defense projects
Columbus, Ohio, Us
Performed stress analysis on shipboard systems and electronic enclosures and tested vehicle mounted military mechanical systems for HMMWV and other platforms using PRO/E, ADAMS SolidWorks/COSMOS and ANSYS.Performed airflow analysis utilizing FLOWTRAN and involved in fan size selection for circuit card cooling.Flow analysis performed on electronic enclosures using FLOWTRAN, SINDA/FLUENT, ANSYS and PRO/E.
Bethesda, Md, Us
Direct)Provided technical expertise for design, analysis and test and proposal preparation of AEGIS Radar System variants and subassemblies for Cruiser Conversion and Frigate Class Littoral and Deepwater applicationsWaveguide component liquid cooling system design, analysis & component selection, CIDS generation, requirements analysis, vendor internal manufacturing interface, piping system design and analysis. RF component analysis, power management, waveguide mtg. palette development, cabinet design, system thermal design and analysis. Lead level contributions to COTS insertion and the refresh of AEGIS electronics suites, electronic enclosure design, analysis & test for AEGIS Baseline VII Phase IC Program. Reviewed specification requirements versus system performance. Analyzed system and subassembly level components using ANSYS for vibration, shock stress and noise per MIL-STD-167, MIL-S-901D, MIL-STD-740-1, -2.
Direct)Performed new Product Development for wireless Base stations, transmitter/receiver, VME Modules, NEMA-4 enclosure design and procurement, EMI (Faraday Cage development) Design, Thermal-fluid system analysis, Zone 4 NEBS environmental conditions. SDRC, ANSYS, MS OFFICECustomer focused concept-to-mass production telecommunications product development (Blue tooth modules, RF, Power modules)Responsible for new hardware design and transition to high volume manufacturing. Familiar with EIA, UL, NEBS Standards. Solved technical, cost, schedule, value and supply chain management issues
Direct) Achieved delivery of three complex systems from proposal through qual. Test, DVT and LRIP 4-6 months ahead of schedule.Provided hands-on SME level skill-based leadership for the requirements analysis, allocation to subsystems, technical, schedule and cost performance on all Programs. Lead the Mechanical Systems Engineering Design, Development, Analysis, prototyping, Documentation, R&M, Production interface and Marketing Support functions. Selected ANSYS, SINDA and PRO/E as the groups tool set.
Direct)Hands-on leadership of the Mechanical Engineering Design and Analysis Group including the functions of technical, schedule, and budget performance for the CEC shipboard, Aerospace radio/modems, IRAD, COMSEC and other RF programs.Key products included military and commercial satellite systems, Shipboard tactical communication systems, COMSEC radio/modems, Cellular base station antennas, shipboard liquid cooled antennas, microwave systems design, CCA layout and system packaging details. Utilized PRO/E, ANSYS, PRO/Mechanica MS-Office and other tools to achieve optimal designs.
EW-ECM, jammers etc
Direct)Successfully led and performed Mechanical Engineering Design, Analysis, Test and Documentation Activities for Electronic Warfare and RF, Radar & Communication jamming systems including UHF/VHF military vehicle mounted tactical ground jammers and associated antenna systems, EA-6B/EF-111 mounted jammers, handheld DF systems, LAMPS RWR systems and cell-phone jammer IRAD. Led and executed start to finish system requirements analysis, generated CIDS, wrote and managed cost accounts as CAM using earned-value systems, ensure CPI/SPI met goals, generated concepts , functional partitioning, trade studies, detailed design, tolerance and producibility analysis, generated and presented SRR, PDR and CDR materials, thermal, vibration, shock, control systems design, analysis and testing to customer design verification requirements. (Toolset including ANSYS, SINDA, ALGOR, 3-D solid modeling tools). Worked with Manufacturing and QA to develop work instructions (MI's), help develop and troubleshooting LRIP and CRMR units. Provided strong technical, design documentation, schedule, cost, customer relationship, and MRP and supply chain management functions.
Lier, Be
Senior Mechanical engineer for power system, EO-IR and Missile Launcher products and a Group Head by 1991 officed on W. Kingsley and 5th street garland, tx
Direct) Successfully developed (proposal to delivery) several military EO-IR, night vision and power conversion products for Aerospace (F-16, A-12, F/A-18, Missile/Launcher, & other platforms), Armored Combat Vehicles, Individual war fighter (NV-EO-IR sights & targeting apps.) and Shipboard applications including VLS, SSN-21, BSY-II. Packaged electro-optical systems, CCA's(with thermal planes and flow through SMT modules in VME/SEM-E) performed mechanical design, tolerance analysis, G.D.&T., wrote B&P, estimated NRE&RE and tracked same with earned value system. Executed thermal analyses and tests, vibration & shock design, analysis and verification testing, carried out trouble shooting activities and systems integration at customer site. (Toolset included ANSYS, SINDA, CV-CAD System.
Taught Physics, Engineering and Math and helped develop computer-based instructional courses.
Dallas, Tx, Us
Direct) Designed and developed EO-IR, RF and Optical Systems encompassing electronics packaging, thermal, vibration, shock analysis, pressure vessel open/closed cycle cryogenic HgCdTe cooling systems design & test for aerospace, missile and armored combat vehicle based FLIR systems. Designed castings, extrusions, plastic parts, supported B&P and carried out system level thermal and vibration testing.
Dallas, Tx, Us
Worked in Missile and Ordnance Division in 1979 and transferred from Lewisville to North Build to radar and flir systems and to business developent iat forest lane on drivers viwers for tracked and wheeled armored combat vehicles
Quick answers generated from the profile data available on this page.
David Doak works for Woodward Governor.
David Doak is listed as Senior Mechanical Systems Engineer at Woodward Governor.
AeroLeads has found 2 work email signals at @woodward.com for David Doak at Woodward Governor.
AeroLeads has found 2 phone signal(s) with area code 586 for David Doak at Woodward Governor.
David Doak is based in Sterling Heights, Michigan, United States while working with Woodward Governor.
David Doak has worked for Woodward Governor, Bae Systems Gsd, Self Employed, Moog, and Swales Aerospace.
You can use AeroLeads to view verified contact signals for David Doak at Woodward Governor, including work email, phone, and LinkedIn data when available.
David Doak holds Mba??, Global Business Strategy, It, Ops Research, Telecom from The University Of Texas At Dallas - School Of Management.
David Doak is listed with skills including Finite Element Analysis, Computatinal Fluid Mechanical, Electro Mechanical Packaging, Solidworks, Cfd, Nastran, Microsoft Office, and Cae.
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trial Search contacts