Drilling Supervisor on the SeaJacks Kraken JULB for a rigless two well permanent P&A project on the Horne & Wren Platform in the Southern North Sea for Tullow Oil. This was performed utilising a Surge Vessel and Closed Tanks for a closed circulating system, Slickline for recovery of flow control devices, pressure/temperature surveys, tubing/casing punching/perforating, tubing severance, Coiled Tubing for deep and shallow cement plug placement, Claxton for 5 ½” tubing recovery and Claxton SABRE system for the 20” x 13 3/8” x 9 5/8” multi string conductor/casing recovery from below the mud line.

Workover and Completions Specialist based in the SonaHess office in the Gassi El Agreb (GEA) concession in Algeria. Performing the planning, equipment contracts, service contracts, workover cost analysis, pre-workover/well preparation programs and workover programs for a workover campaign due to commence in 2016. Also assisting with well integrity issues and the contract and planning for a well integrity/stabilization campaign.

Project Coordinator for a Coiled Tubing UBD Integrated Operation, which includes rig contractor, UBD provider, safety systems provider and camp services based in the Saudi Aramco Udhailiya Office and reporting to the Saudi Armco drilling superintendent. Duties include looking after the daily operations, logistics and HSE for two CT UBD Re-entry Rigs which are performing casing exits and multiple 3 5/8” open hole laterals which are drilled underbalanced in the Khuff ‘B’ and Khuff 'C' Reservoirs utilising bio-steering with H2S levels of up to 10%. Duties also include controlling the project documentation including all operating procedures, management of change process and assisting the Saudi Aramco drilling engineers with candidate selection and well planning.

Drilling Supervisor on the Noble Mick O’Brien (JU3000N) for an exploration well.Night Drilling Supervisor on the Noble David Tinsley (MODEC 330C-38E) mainly performing re-entries consisting of de-completions, 9 5/8” cased hole sidetracks, 7” cemented liners, 6” laterals and re-completions as well as new drill’s from existing platforms.Workover Supervisor for a Hydraulic Workover Unit for operations on the South West Fateh Platform Complex and Normally Unmanned Installations. Office based for the initial planning and program phase then offshore for the supervision of operations, which consisted of the de-completion of the existing Gas Lift Completions then running new ESP/Gas Lift Completions.

Senior Workover Supervisor on the Nabors Ocean Master VIII (BMC 160C) for a four well campaign on two offshore platforms consisting of 1 x CT stimulation, 2 x CT PLT’s and 1 x workover consisting of a de-completion and re-completion.

Senior Well Services Supervisor on the Miskar and Hasdrubal Platforms, performing well integrity checks, slickline/braided line memory camera and perforating operations and Coiled Tubing operations, including a 2” Catenary CT Underreaming Operation from a DP-2 AHT with a HPHT Well Cleanup Package.

Wellsite Team Leader for the mobilisation and commissioning of two CT UBD Re-entry Rigs and Underbalanced Packages for an Integrated Operations Project for Saudi Aramco. Operations then consisted of performing casing exits and drilling multiple 3 5/8” open hole laterals in the Khuff ‘B’ and Khuff 'C' Reservoirs with these laterals all being steered underbalanced utilising bio-steering with H2S levels of up to 10%.

Well Site Drilling Engineer on a CTD Rig for a CT UBD Re-entry Project for Saudi Aramco performing casing exits and drilling multiple 3 5/8” open hole laterals in the Khuff ‘B’, Khuff 'C' and Pre Khuff reservoirs with these laterals all being steered underbalanced utilising bio-steering with H2S levels of up to 6% in the Khuff 'B' and Khuff 'C'.

Drilling and Workover Supervisor on a Self Elevating Workover Platform (SEWOP) performing well interventions with Slickline, E-line and Coiled Tubing and the preparation and planning for performing workover operations utilising a Hydraulic Workover Unit.Drilling and Workover Supervisor for an offshore re-entry drilling program comprising of Completion recovery, 9 5/8” Sidetracks, 8 ½” Hole Sections, 7” Cemented Liners, 6 1/8” Reservoir Sections and Re-completions on the South West Fateh Platform Complex utilising a Hydraulic Workover Unit.Both of these operations required good communication between drilling and production for daily ongoing operations, PTW integration and control and emergency action planning, while the HWU Drilling operation was especially challenging due to the small footprint available on the platforms.

Rig Superintendent for a one rig land based drilling operation in the Crimean Peninsula in the Ukraine.

Nightshift Drilling Supervisor for a CT UBD operation, which required the reservoir section to be drilled underbalanced out of the 7” Shoe with 2 3/8” Coiled Tubing.

CT UBD Representative for the supervision of a 3 well CTD UBD well preparation campaign on a Workover Hoist for Santos in the Cooper Basin, South Australia. Operations consisted of recovering existing completions, cleanout of liner, SBT-GR-CCL logs, logging and setting Bridge Plugs on Depth and 5 ½” 17 lb/ft Casing Exits.

06/02 – 08/06 Thru Tubing Operations Manager - Oman Responsible for client liaison, job design, tool selection, supervision of the Thru Tubing Service Supervisors and P & L for Thru Tubing Operations/Interventions and Sidetracking performed on Coiled Tubing, Workover Hoists, Snubbing/Hydraulic Workover Units and Land Rigs. 08/01 – 06/02 Middle East Region Engineer - DubaiResponsible for all Middle East Operations, Region Support and P&L for the Middle East Thru Tubing Services Group.07/00 – 08/01 Operations Engineer - OmanResponsible for client liaison, job design, tool selection and field supervision for Thru Tubing Operations/Interventions performed on Coiled Tubing and Workover Hoists and the 4 ½” Trackmaster Whipstocks and Thru Tubing/Open Hole fishing operations on the G3 Hybrid Coiled Tubing Drilling Rig (PDO Rig 27). Also covered as last man out for the Remedial Department covering 7” and 9 5/8” Trackmaster Whipstocks, Fishing and Workover Operations on the Land Rigs and Workover Hoists. 05/99 – 07/00 Thru Tubing Service Manager – UK Responsible for the UK Operations and P&L for the Thru Tubing Services Group based in Aberdeen

Sales/Services Engineer in the Thru-Tubing Department of Weatherford UK.

09/97 - 02/99 Baker Hughes Inteq - Wellsite Supervisor/Project EngineerTransferred to the Wellbore Construction Department of Baker Hughes Inteq as a Wellsite Supervisor/Project Engineer for the Galileo 1 Hybrid Coiled Tubing Drilling/Workover Rig, in Holland working for NAM. The position was split two weeks on the rig location as a Night Wellsite Supervisor and two weeks as a Project Engineer at the Assen Project Office.01/96 - 09/97 Baker Oil Tools - Thru Tubing Operations EngineerResponsible for client liaison, job design, tool selection and rental for Coiled Tubing and Hydraulic Workover operations. Also supervision of fishing, milling, underreaming, tubing/pipe severance, whipstock and thru tubing liner operations offshore in the North Sea.

09/95 - 12/95 Coiled Tubing Operations EngineerTransferred to the Mechanical Engineering Department (Tomball, Texas) of BJ Services based in Venezuela. Part of a 2-man team responsible for the budget, equipment selection, equipment procurement and construction for the 2nd Multi-Purpose Coiled Tubing Barge for Lake Maracaibo.11/94 - 09/95 Country EngineerTransferred to Venezuela as Country Engineer for Coiled Tubing. Assisted the Mechanical Engineering Department of BJ Services with the construction and commissioning of a Multi- Purpose Coiled Tubing Barge for Lake Maracaibo. After the commissioning of the barge, I was then responsible for the construction and commissioning of a trailer mounted Coiled Tubing Unit in the East of the Country.With both units operational my responsibilities changed to the operational support, procurement of spares, client liaison, job design/modeling, program/procedure writing, seminars and training for both Districts01/94 - 11/94 Coiled Tubing Operations Engineer Transferred onshore as an Operations Engineer, responsible for the job design/modeling, program/procedure writing for a wide range of coiled tubing operations. Main projects included the Production Logging of horizontal wells for Shell Expro UK and as the Project Engineer for the design, testing and offshore supervision of the first 2 7/8” Coiled Tubing ESP Completion for Shell Expro UK on the Auk Alpha Platform in the North Sea.BJ Services (Salvesen Well Services)06/91 - 01/94 Coiled Tubing Operator to Senior Field SupervisorEmployed by BJ Services (formally Salvesen Well Services) as a Coiled Tubing Operator and promoted to the position of Senior Field Supervisors.

Trainee Coiled Tubing Operator to Coiled Tubing OperatorEmployed as Trainee Coiled Tubing Operator. Carried out a varied selection of Coiled Tubing Operations in the North Sea, Ireland and Syria.

Roustabout to Roughneck/Assistant DerrickmanEmployed as a roustabout on the Sedco 704 and Sedco 707 semi submersibles in the North Sea, working up to roughneck/assistant derrickman.