David Mcbeath Email & Phone Number

Aberdeen, Scotland, United Kingdom

• Investigate and diagnose any deficiency which may impede efficient installation and take the appropriate corrective action to resolve the situation. • Provide the customer’s representative with sufficient information and guidance to ensure safe and correct task completion. • Review procedures and drawings of equipment on a regular basis, carry out pre- use inspection of equipment (visual and written) by procedure. Undertake pre-task safety survey and necessary toolbox/site talks with client prior to equipment being used.• Decommission and/or rig down and organize shipping of equipment to and from Rig site.• Carry out all work in strict adherence to company procedures.• Document non-conformances in the field via the Service Quality Reporting (SQ) system. Forward (SQ) within prescribed timelines and liaise with onshore for efficient and timely remedy.• Attend and participate in Extended Factory Acceptance Testing (EFAT), System Integration Testing (SIT) / Site Receipt Testing (SRT).• Liaise with customer and provide on-site feedback pertinent to the task. • Complete Field Service Orders (FSO), Job Debrief and Competence Checklists before demobilization and ensure that the customer has reviewed and signed the FSO/Competence Checklists applicable to the task. • Provide accurate maintenance and spares usage feedback throughout task.• Mentor technicians with training and competence development.• Install / recover all types of Cameron Surface Xmas tree / Surface wellhead equipment.• Experience in HPHT 15,000psi surface systems / 10,000psi and 5000psi.• Involvement with Side-tracks / Slot recovery’s / exploration wells / Commissioning.• Compile accurate data for End of Well Reports (EOWR) Daily service reporting (DSR).• Deep Experience in Mudline casing support systems.• Part take in Client meetings, Service well on paper (SWOP), Complete well on paper (CWOP), Drill well on paper (DWOP), After action reviews (AAR), Pre-phase meetings.

Aberdeen, Scotland, United Kingdom

• Investigate and diagnose any deficiency which may impede efficient installation and take the appropriate corrective action to resolve the situation. • Provide the customer’s representative with sufficient information and guidance to ensure safe and correct task completion. • Review procedures and drawings of equipment on a regular basis, carry out pre- use inspection of equipment (visual and written) by procedure. Undertake pre-task safety survey and necessary toolbox/site talks with client prior to equipment being used.• Decommission and/or rig down and organize shipping of equipment to and from Rig site.• Carry out all work in strict adherence to company procedures.• Document non-conformances in the field via the Service Quality Reporting (SQ) system. Forward (SQ) within prescribed timelines and liaise with onshore for efficient and timely remedy.• Attend and participate in Extended Factory Acceptance Testing (EFAT), System Integration Testing (SIT) / Site Receipt Testing (SRT).• Liaise with customer and provide on-site feedback pertinent to the task. • Complete Field Service Orders (FSO), Job Debrief and Competence Checklists before demobilization and ensure that the customer has reviewed and signed the FSO/Competence Checklists applicable to the task. • Provide accurate maintenance and spares usage feedback throughout task.• Mentor technicians with training and competence development.• Install / recover all types of Cameron Surface Xmas tree / Surface wellhead equipment.• Experience in HPHT 15,000psi surface systems / 10,000psi and 5000psi.• Involvement with Side-tracks / Slot recovery’s / exploration wells / Commissioning.• Compile accurate data for End of Well Reports (EOWR) Daily service reporting (DSR).• Deep Experience in Mudline casing support systems.• Part take in Client meetings, Service well on paper (SWOP), Complete well on paper (CWOP), Drill well on paper (DWOP), After action reviews (AAR), Pre-phase meetings.

Aberdeen, Scotland, United Kingdom

• Investigate and diagnose any deficiency which may impede efficient installation and take the appropriate corrective action to resolve the situation. • Provide the customer’s representative with sufficient information and guidance to ensure safe and correct task completion. • Review procedures and drawings of equipment on a regular basis, carry out pre- use inspection of equipment (visual and written) by procedure. Undertake pre-task safety survey and necessary toolbox/site talks with client prior to equipment being used.• Decommission and/or rig down and organize shipping of equipment to and from Rig site.• Carry out all work in strict adherence to company procedures.• Document non-conformances in the field via the Service Quality Reporting (SQ) system. Forward (SQ) within prescribed timelines and liaise with onshore for efficient and timely remedy.• Attend and participate in Extended Factory Acceptance Testing (EFAT), System Integration Testing (SIT) / Site Receipt Testing (SRT).• Liaise with customer and provide on-site feedback pertinent to the task. • Complete Field Service Orders (FSO), Job Debrief and Competence Checklists before demobilization and ensure that the customer has reviewed and signed the FSO/Competence Checklists applicable to the task. • Provide accurate maintenance and spares usage feedback throughout task.• Mentor technicians with training and competence development.• Install / recover all types of Cameron Surface Xmas tree / Surface wellhead equipment.• Experience in HPHT 15,000psi surface systems / 10,000psi and 5000psi.• Involvement with Side-tracks / Slot recovery’s / exploration wells / Commissioning.• Compile accurate data for End of Well Reports (EOWR) Daily service reporting (DSR).• Deep Experience in Mudline casing support systems.• Part take in Client meetings, Service well on paper (SWOP), Complete well on paper (CWOP), Drill well on paper (DWOP), After action reviews (AAR), Pre-phase meetings.

Aberdeen, Scotland, United Kingdom

• Investigate and diagnose any deficiency which may impede efficient installation and take the appropriate corrective action to resolve the situation. • Provide the customer’s representative with sufficient information and guidance to ensure safe and correct task completion. • Review procedures and drawings of equipment on a regular basis, carry out pre- use inspection of equipment (visual and written) by procedure. Undertake pre-task safety survey and necessary toolbox/site talks with client prior to equipment being used.• Decommission and/or rig down and organize shipping of equipment to and from Rig site.• Carry out all work in strict adherence to company procedures.• Document non-conformances in the field via the Service Quality Reporting (SQ) system. Forward (SQ) within prescribed timelines and liaise with onshore for efficient and timely remedy.• Attend and participate in Extended Factory Acceptance Testing (EFAT), System Integration Testing (SIT) / Site Receipt Testing (SRT).• Liaise with customer and provide on-site feedback pertinent to the task. • Complete Field Service Orders (FSO), Job Debrief and Competence Checklists before demobilization and ensure that the customer has reviewed and signed the FSO/Competence Checklists applicable to the task. • Provide accurate maintenance and spares usage feedback throughout task.• Mentor technicians with training and competence development.• Install / recover all types of Cameron Surface Xmas tree / Surface wellhead equipment.• Experience in HPHT 15,000psi surface systems / 10,000psi and 5000psi.• Involvement with Side-tracks / Slot recovery’s / exploration wells / Commissioning.• Compile accurate data for End of Well Reports (EOWR) Daily service reporting (DSR).• Deep Experience in Mudline casing support systems.• Part take in Client meetings, Service well on paper (SWOP), Complete well on paper (CWOP), Drill well on paper (DWOP), After action reviews (AAR), Pre-phase meetings.

Aberdeen, Scotland, United Kingdom, Onshore And Offshore

 Conform to Company process and procedures as a condition of employment and the way I conduct myself daily. Used to assessing and mitigating risk through control measures such as: risk assessment; permit to work, management of change, HARC (Hazard Analysis Risk Control) cards and Q-STOP, which is Schlumberger’s workplace process for stopping unsafe tasks.  Deep technical experience working with the following types of equipment: Safety critical equipment such as pressure safety valves, safety isolation valves, bursting discs, rotating equipment and surface equipment, instrument equipment, Emergency shut down panels. Wide variety of diesel engines in a variety of applications including fire pumps, downhole pumps, and high and low pressure utility surface pumping equipment, hydraulic motors. Heat exchangers, transfer / lift pumps and air compressors. Compressors including, screw and vane type compressors, Generators. Used to working safely with all ancillary equipment that a Mechanical Technician would be expected to use including lathes and milling machines, etc. Lead the planning and execution of preventative, predictive and corrective maintenance on all Schlumberger Mechanical equipment in compliance with Schlumberger’s procedures and Manufacturers guidelines / specifications to prevent downtime and also carry out breakdown repairs when required. Maintaining of equipment to the strictest procedures, making sure the online maintenance management system is up-to-date and ensuring high reliability of tools when deployed to remote locations. Conduct pressure testing of equipment to strict procedures up to 22500 psig to ensure equipment integrity. Also working closely when required with Det Norske Veritas being the 3rd party witnessing body. Working closely with Lead Mechanical Technician and Maintenance supervisor to plan maintenance to minimise downtime. Working in a multicultural team environment working to the highest standards.

Aberdeen, Scotland, United Kingdom

 Experience with manufacturer’s diesel, petrol, hydraulic, pneumatic, transmission and braking systems used in construction plant and equipment for engines, winches, compressors, pumps, generators, dumpers, excavators, lifting, valves and gearboxes. Ensure at all times that safe working practices, procedures and standards are adopted when carrying out work and maintaining a tidy and well organised workshop. Dismantling of equipment, diagnosing faults and reporting any specific fault(s) on job cards. Determine the feasibility of equipment repair, followed by the ordering of suitable spare parts, ensuring they are available when required. Hands-on repair (in compliance with manufacturer’s specifications) and assembly of all types of construction plant and ancillary equipment using manufacturer’s drawings, operations and maintenance manuals. Attend breakdowns at client’s site: responsible for diagnosing fault, report any specific fault(s) on job cards and perform repairs as necessary, while adhering to the client’s site rules and safety regulations. Organise and complete planned maintenance service to plant using service checklists and ensure that equipment service records are updated following completion of work. Ensure that all lifting to plant and equipment is in line with GAP guidelines and procedures. Carry out pressure testing (in compliance with manufacturer’s specifications) in line with procedures to ensure integrity of hydraulic and pneumatic systems. Carry out welding repairs to equipment using manual metal arc (MMA), metal inert gas (MIG) and acetylene including gas cutting. Participate in out-of-hours breakdown cover on an on-call rota basis.

Aberdeen, Scotland, United Kingdom, Onshore

•To weld light steel and Aluminium fabrications using a MMA / MIG / TIG welding process, using a range of material thicknesses from 3mm to 12mm for the Oil and Gas Offshore sector.•Comply with safety and company standards.•Work to the required standards with minimal supervision.•Ability to carry out self-inspection of own welding activities within defined parameters/requirements before submitting work to final Inspection.•Undertake good housekeeping to reinstate the work area following engineering activities.•Work safely ensuring work areas are free from hazards and equipment is visually inspected before use.

Svq Level 3 Construction Plant Maintenance - Modern Apprenticeship, Agricultural Mechanics And Equipment/Machine Technology, Passed All Units

Svq Level 2 Construction Plant Maintenance - Modern Apprenticeship, Agricultural Mechanics And Equipment/Machine Technology, Passed All Units

Svq Level 2 Performing Engineering Operations, Mechanical Engineering, Passed All Units

Engineering Technology, General