Davis Taylor Email & Phone Number

Foothill Ranch, Ca, Us

-Improved the design of electrostatic accelerator electrodes and insulators using Finite Element Analysis (FEA) modelling using Opera, CST, and Python.-Used FEA modelling to design dipole and quadrupole magnets for bending and focusing proton beams (both permanent magnets and electromagnets).-Designed magnetic shielding for fusion devices using Opera and CST in both static and dynamic models.-Designed cables and created a cable routing plan for a radiation therapy facility (300+ cables including AC power, high current DC, high voltage DC, and low voltage instrumentation).-Developed a permanent magnet quadrupole design and a product validation plan.

Salt Lake City, Ut, Us

-Designed a new high voltage ceramic vacuum feedthrough using FEA software (Opera/CST) to simulate charged particle trajectories, electrostatics, magnetics, and heat dissipation.-Designed x-ray tube sub-assemblies and manufacturing fixturing using SolidWorks.-Developed manufacturing monitoring equipment using PLC's and LabView.-Developed x-ray tube sub-assembly test equipment to validate new designs.-Maintained an open dialogue with customers to ensure that x-ray tube prototypes meet their specifications.-Contacted and met with vendors to build x-ray tube sub-assemblies and worked closely with them to reduce sub-assembly cost.-Developed detailed test plans for equipment and process validation.-Worked inside clean rooms and and in inert gas glove boxes to reduce x-ray tube sub-assembly oxidation and improve high vacuum cleanliness.

Livermore, Ca, Us

- Operate and maintain high voltage pulsed power systems at the National Ignition Facility (NIF), the world’s largest and most energetic laser system.-Develop new high voltage diagnostics for laser pulsed power systems using LabView compactRIO.-Test and repair high voltage switches such as ignitrons and thyratrons.- Partner with vendors to test and to develop new hardware such as turbo pumps and high power solid state switches for our pulsed power subsystems.- Develop procedures and documentation of new processes and equipment.-Create and improve LabVIEW programs for data analysis, component calibration, and turbo pump control.- Mentor and supervise new employees in all aspects of pulsed power maintenance and operations work.

Herndon, Virginia, Us

-Fixed and maintained complex pulsed power systems at the National Ignition Facility -Utilized many electronics tools such as digital multi-meters, LCR meters, time domain reflectometers, hi-pot testers, oscilloscopes, pulse generators, delay generators, arbitrary waveform generators, voltage sources, and current sources-Maintained high vacuum (10^-7 Torr) systems that incorporated turbo pumps, capacitance manometers, ion gauges, and mass flow controllers.-Assessed turbo pump health using vibration sensors and frequency analysis equipmentPerformed calibration of high voltage components and test equipment including several different high voltage power supplies, analog isolation amplifier modules, and high voltage probes.-Used proper soldering techniques to repair and upgrade printed circuit boards and high voltage electrical connections in plasma pulse generators and switch pulse generators.-Troubleshot, repaired and upgraded high voltage electrical systems using schematics, procedures, and equipment manuals-Worked with embedded controllers and front end processors running VxWorks-Ensured the safety and reliability of the NIF subsystems by closely following established procedures, maintaining good situational awareness, and communicating with team members.-Obtained rigger, crane operator, and powered industrial truck certifications.

Tracy, California, Us

-Worked independently and in team environments to fix and maintain wind turbines using a variety of pnuematic, hydraulic, and electric tools. -Used vibration analysis equipment to assess gearbox health. Used digital multimeters, hipot testers, oscilloscopes, voltage sources, and current sources to troubleshoot all aspects of wind turbine electrical systems. -Repaired hub pitch assemblies and nacelle yaw assemblies that included 3 phases induction motors, bearings, multiple stage planetary gear boxes, and electro-mechanical brakes. -Rebuilt, tested, and provided troubleshooting on pneumatic brake panels that included water separators, pressure regulators, check valves, directional control valves, and shuttle valves. -Fabricated and improved lab test stands and lab testing techniques for the wind turbine electrical components including printed circuit boards, solid state relays, overload relays, contactors, circuit breakers, programmable logic controllers, digital/analog interface circuits, three phase servo controllers, and three phase servo motors. -Repaired circuit boards using diagrams to diagnose and troubleshoot component failures, and replaced parts using appropriate soldering techniques. -Used my familiarity with OSHA standards and NFPA standards to wear proper ppe and perform lockout tagout procedures to work safely around mechanical drive trains and high voltage alternating current and direct current sources. -Used my knowledge of safe rigging practices and attention to detail to work safely around forklifts and cranes and during rigging jobs at 80-100 feet above the ground.

Mammoth Lakes, Ca, Us

Performed professional rope rescue and gondola evacuation scenarios at heights over 100 feet using belaying, repelling, and ascending techniques to reach guests and transport them to safety. Provided advanced on hill first aid and transportation for sick and injured guests using toboggans, snowmobiles, and emergency medical equipment. Performed avalanche hazard mitigation by ski cutting and snow blasting. Maintained my personal safety and the safety of my coworkers through careful following of established procedures and observation of the environment including snow pack and weather conditions. Maintained ski patrol inventory including: signs, rope closures, and first aid equipment such as backboard kits, AEDs, and oxygen tanks daily. Provided customer service and directions. Confronted and educated guests engaged in unsafe behavior. Led an on hill first aid station, assigning work duties for 4-5 other patrollers also working at my first aid station. Instructed new patrollers in first aid and avalanche control.

Durango, Co, Us

Created trail structures including: a 36 foot backcountry bridge, crib steps, rock walls, and rock steps. Used many tools including a grip hoist (with high line, using tripods, anchor trees, and spar trees) with rigging to move and place large rocks and logs. Used a hydraulic jack, and torque wrenches to assist in the construction of a bridge. Took a physical inventory of tools on a daily basis and cleaned and oiled tools after each two or three week hitch. Worked at back country sites for up to 15 days at a time and in all weather conditions. Helped lead the crew when one of the crew leaders was absent. Led education for other crew members on trail construction, first aid, knots, and the operation and maintenance of group camp gear. Contributed to daily safety meetings and their documentation. Planned food and travel logistics with my fellow crew members while staying within a budget.

In 2009 I traveled to New Zealand on a working holiday visa for 7 months. I participated in a program called Willing Workers On Organic Farms and learned about farming, brewing beer, building fences, and much more! I also spent time working at the Snowfarm cross country ski area as a ski instructor. I used group management and leadership skills to teach large school groups. I also spent some time working at the New World Supermarket in Wanaka as a checkout operator for extra travel money.

Helped a local non-profit part time to map local trails, recreation sites, and amenities using GPS equipment and GIS Software including arcview.

Utilized an extensive knowledge of the goods being sold and the activities that they would be used to sell mountaineering, climbing, and backpacking equipment and provide excellent customer service. Completed a physical inventory after each new shipment of products.

Bozeman, Mt, Us

Used dilatometers to study the thermal expansion of Solid Oxide Fuel Cell components. Sintered and prepared ceramic samples for thermal expansion and strength testing. Designed experiments, completed data acquisition, and performed statistical analysis on the results. Used X-ray diffraction equipment to analyze chemical composition of sintered samples. Worked independently and created new projects and explored new avenues of research, as well as creating many of the preparatory and testing processes that were used. Prepared and gave a report on my summer research.

Washington, Dc, Us

Customer service, and cash handling were the primary skills required.Explained rules and regulations of the recreation area, policed the entry station, and sold tickets for the shuttle bus into the recreation area.

Bachelor'S Degree, Physics

Trade, Wind Turbine Technician