Deanthony Burley Email & Phone Number

Cameron, Louisiana, United States

Lusby, Maryland

Kermit, Texas

Dekalb, Ms

Kemper County Generating Facility is a state-of-the-art Integrated Gasification Combined Cycle (IGCC) power production plant.• Participate on several process improvement teams and positively affected plant processes. Example: Salt in the Sour Water was plugging the flare line. The process team investigated the root cause, brainstormed solutions, and resolved the issue by adding acid to dissolve the salt. • Maintain operations of plant equipment via the Distributed Control System (DCS) control board, specifically the highly pressured, syngas clean-up, AGR (Acid Gas Removal) area and the KBR-designed Sour Water system which produces Anhydrous Ammonia and Wet Sulfuric Acid. Carbon Dioxide (CO2) is captured, compressed and transferred via a pipeline for Enhanced Oil Recovery.• Fill Team Leader role as needed. Assist in reviewing and rewriting Operating Procedures.• Collaborate with management, peers, engineers, and contractors to coordinate the start-up and commissioning activities. • Monitor, control, troubleshoot, and improve plant processes (pump flow, pressure, temperature, cause & effect.) Complete real-time equipment assessments and respond to emergency situations.• Monitor the Ammonia Refrigeration system and compressors to assure that the Selexol stays at operating temperature, as well as two Siemens eight-stage CO2 compressors, and various recycle compressors.• Perform preventative & corrective maintenance, rounds, and readings to ensure that processes run per procedures.

Peachtree City, Ga

Avista Oil: Re-refine used oil through a state of the art distillation and PNA extraction process to make motor oil.• Coordinated commissioning/start-up activities of major equipment associated with the refinement process.• Contributed to the Process Improvement, Risk Management, and the Emergency Response Teams.• Safely operated and monitored the continuous closed loop refinement process using the DCS, adjusted product flows, temperatures, vacuums, and pressures, as necessary, to ensure the correct process and equipment balance, quality, and yields were met. Performed in-process quality checks.• Monitored plant utilities: plant boiler, reverse osmosis system, hot oil unit, chiller, wastewater, and environmental requirements.• Loaded/unloaded bulk tanker trucks and railcars. Performed bulk tanker unloading for hazardous chemicals per DOT and HazMat procedures.• Performed preventive and corrective maintenance, troubleshooting, problem-solving, and documenting real-time process issues. Assisted in writing and updating Standard Operating Procedures (SOPs.)• Trained shift operators. Evaluated operator’s competencies and skills to determine the best possible job fit.• Completed daily production paperwork and maintained daily communications with the Plant Manager.

Peachtree City, Ga

Viega manufactures cross-linked Polyethylene (PEX) used to produce high temperature, flexible plastic (polymer) pipe.• Improved the final product quality/color through controlled experiment; increased the process temperature by 1 degree and monitored the results after 6-12 hours. As a result, production procedures were updated to include the temperature change process enhancement.• Helped coordinate the commissioning and start-up of one (B) of two (A/B) extrusion lines.• Monitored and performed (from the control board's PLC system) the safe operation of auxiliary equipment and instrumentation, including monitoring and regulating speeds, pressures, temperatures, amounts and flow of materials and ingredients.• Performed in-process sampling and quality checks utilizing a variety of lab equipment.• Repositioned, loaded, and unloaded rail cars, as needed,• Documented and updated applicable records and equipment logs. Input/updated required SAP information.• Provided on-the-job training for Chemical Operators and backup support for the Production Supervisor and Quality Technician.

Union City, Ga

• Manufacture Provenge which is FDA approved and is designed to induce an immune response against prostate cancer.• Most duties are performed in a gowned clean room environment and include receiving and inspecting apheresis (human blood) shipments with the utmost care to ensure it is properly packaged and documented per established procedures.• Execute, with the utmost consistency, all labeling and packaging of the final product.• Enter data with a high degree of accuracy for both electronic and paper systems.• Maintain a cGMP material warehouse, receiving, labeling, material movement, shipping, cleaning materials, and kitting for manufacturing process.• Maintain a cycle-counting & physical inventory process to ensure inventory accuracy and availability of product to support production. • Perform tasks within the GMP facility per established SOPs.

Forrest Park, Ga

• Championed process improvement. Served on several Lean/5S Kaizen process improvement teams.• Operated, changed over, and performed minor maintenance on machinery used for production: decaser, Posiflex, bottle orientor, trigger orientor, box erector, filler, sleever, case packer, and case sealers.• Monitored the safe operation of the control board's PLC system which controlled adding raw materials to process tanks, operating process equipment and monitoring controls and instrumentation to locate ingredient flows, process temperatures, pressures and variations making necessary adjustments as needed.• Performed rail car switches with rail road personnel and completed unloading activities of caustic and chlorine railcars per DOT and HazMat procedures.• Coupling, uncoupling, positioning and connecting railcars for transfer of caustic and chlorine.• Performed bulk tanker truck unloading activities for highly flammable and hazardous chemicals per DOT and HazMat procedures.• Performed equipment inspection, troubleshooting and generated work orders to correct deficiencies. Performed quality checks on raw materials and all finished products.

Peachtree City, Ga

Lubrizol manufactures Chlorinated Polyvinyl Chloride (CPVC) powder that is used to produce thermoplastic piping.• Ensured shift operators complied with plant health, safety, environmental, and quality requirements.• Assisted in writing Job Safety Analysis (JSAs) and Standard Operating Procedures (SOPs).• Helped coordinate the commissioning and start-up of new CPVC tower.• Operated an extruder to manufacture cross-linked Polyethylene (PEX) which produced high temperature, flexible plastic (polymer) pipe.• Loaded "bins" with various raw materials to maintain a continuous flow of production, pressures, and temperatures. Conducted raw material, in-process, and finished product QC sampling and testing.• Monitored and adjusted the continuous flow of raw materials, chemical, and finished products using the Programmable Logic Controller (PLC) system to ensure that the process stays within established guidelines.• Operated and performed troubleshooting and preventive/corrective maintenance on mechanical equipment.• Moved, loaded and unloaded railcars; loaded and unloaded trucks and box trailers. Input production and other information into the company's computer system using SAP.

Smyrna, Ga

Sterigenics is an Ethylene Oxide (EO) medical sterilization company.• Obtained an Ethylene Oxide Operator’s Certificate Certification.• Monitored, operated, and maintained each process from beginning to end from the DCS.• Safely loaded and unloaded sterilization chambers with medical product (using a forklift, and wearing a full faced respirator in “high exposure” areas.) • Applied and removed Biological Indicators accordingly. • Performed minor maintenance repairs, housekeeping, entering information, as well as tracked each load using the company’s computer system, and also replacing 600lbs. EO drums as needed.• Participated as a member of the Safety Committee, and helped in updated several SOP’s and JSA’s.

Morrow, Ga

Sherwin-Williams is a paint manufacturing company.• Made products by following "batch sheet" instructions.• Completed duties to include, cutting and dumping 55lb. bags, and 2000lb. “super sacks” of pigment, fillers, shade base, and other materials inside of mills filled with oils, resins, and solvents. (Batches are mixed together in the mills tested, and the dropped into a designated mixer for final preparation.)

Forest Park, Ga

Eastman manufactures resins & polyesters used for paints and other products.• Performed duties to include reading and following all procedures from batch sheets and understanding and operating the controls on the PLC (Program Logistic Control). • Completed other responsibilities such as charging, mixing, cooking, and monitoring the flow of raw materials and various chemicals inside reactors (known as kettles) using the PLC. • Sampled, tested, transferred and stored the finished product both manually and by electronically. • Changed bags or clothes on the filtering system, measured the volume of the storage tanks, charged raw materials to the batch, inspected and troubleshot the equipment.

Newport, De

Ciba manufactures pigments used in the automotive paints, dyes, and fabric industries. • Supervised a staff of three to four operators while completing primary duties such as monitoring quality control, maintaining a work safe environment, training, optimizing production, providing proper permits, troubleshooting, writing performance reviews, keeping pollution & environmental mishaps to a minimal, and completing minor maintenance repairs. Performed QC testing and sampling, as well as reading, understanding, and monoriting all procedures that apply to the process.• Batches require the use of some Hazardous, and Non-Hazardous chemicals which were monitored, charged, mixed, (in large reactors), then transferred through pipelines to different areas of the process by the using a PLC.