Deepak Kumar Rout Email & Phone Number

Cuttack, Od, In

Bhubaneswar, Odisha, India

Odisha, India

• Conducting and participating Quality Management System (QMS) audit and reporting the same to management and client.• Conducting and participating Management Review Meeting (MRM), customer related compliances and lessons learned towards improving project acceptance rate.• Co-coordinating with other discipline to improve the quality system.• Participation of project quality plan and inspection co-ordination plan documentation preparation.• Review and approval of subcontractor and supplier project quality plan and other quality documents.• Identifying the gap, from the audit finding data and doing gap analysis to improve the quality system.• Reviewing and Approving QAP, ITP, Method Statement and Procedures etc,• Monitoring and controlling painting and insulation activities.• Steel structural items fabrication/Erection Inspection and audit.• Prepare inspection and audit reports as per projects requirements.• Prepare Inspection release note reports as per projects requirements.• Review vendor technical documents.• Vendor audit and process audit of steel making process.• Raised NCR as deviation found during inspection/Audit.• Witnessed for Export/Import of manufacturing items.• Ensuring non-conforming products are identified and placed on restrictions.• Monitoring and controlling painting and insulation activities.• Understanding of Surface preparation of Blasting and painting of piping and structural steel and surveillance carried out regularly.• Responsible for implementing corrective actions where deficiencies are detected.

Paradip,Odisha

Project Inspection Lead• Incoming material Inspections.• Visual Inspection of equipment’s and piping system of pellet plant.• Dimension inspection of equipment’s and piping system of pellet plant.• Raised NCR against the deviations jobs.• Qc clearance of incoming materials and executed job as per requirements.• Reviewed final dossiers for dispatch materials.• Making line history of piping system.• Making final acceptance protocol for equipment’s and piping systems.• Advise to execution engineer to prepare the right job in any rectifications found during inspection.• Vendor audit at various place for client.• Radiography film interpretation/review.• Conducting daily Quality meeting with Quality persons to mitigate Quality issues at site.• Responsible to ensure quality monitoring on all construction activities including special assessment of specific work elements is required to verify conformance with all applicable requirements.• Reviewing and Approving QAP, ITP, Method Statement and Procedures etc,• Monitoring and controlling painting and insulation activities.• Steel structural items fabrication/Erection Inspection and audit.• Prepare inspection and audit reports as per projects requirements.• 8 nos stacker/re-claimer,4nos shiploader,2nos wagon tippler for iron and coal material handling system at paradip port,jagatsinghpur,odisha.1- Reviewed incoming materials MTC and Manufacturing data.2- Handle Qa/Qc Engineers as per projects inspection requirement’s 3-Issue NCR to vendor during Quality deviations.4-Mention Daily Inspection schedule as per projects requirement’s. 5-Conducted Daily Meeting with vendor’s QC engineers.6-Vendors Invoice reviewed as per bill break of and QC clearance. 7-Vendors inspection protocol reviewed after inspection completion. 8-Issued punch points to vendors etc.

Abu Dhabi, United Arab Emirates

Quality Control Engineer• Review Contractor QAP and method of statement as per specification and client requirements.• Incoming material and consumables inspection as per requirement.• Witness during welding as per approved WPS.• Calibration certificates review of measuring tool and equipment’s.• Ultrasonic testing scanning witnesses as per specification.• Radiography film interpretation as per specification.• Coordination with client for daily inspection.• Hydro test witness as per approved hydro test package.• MPT witness for as per specification.• Weld visual inspection as per specification.• Specification used Api 1104,Asme b31.3,Asme sec-ix for welding

Ntpc,Lara,Raigarh,India

Sr.Inspection Engineer(Qa/Qc)• Welding/Ndt Inspection of Boiler water wall tube,Economizer coil,Super heater coil,final super heater coil,Riser pipe,header,piping-BFD,MSL,CRH,HRH.• ,Fit up check before welding as per specifications.• Base material preheat check as per specification and requirments.• During welding check as per approved WPS.• Pwht/Welding and Ndt Inspection of material Sa 335 P91, Sa 335 P22, Sa 335 P11, Sa 335 P12,Sa 106 gr.b,c as per specifications requirement.• Pwht/Welding and Ndt Inspection of material Sa 213 T91, Sa 213 T22, Sa 213 T11, Sa 213 T12 as per specification.• Ultrasonic testing wittness as per specification and requirments.• Radiographic films interprations as per specifications.• Weld visual inspection as per requirments and specifications.• Coordination with client for mechanical clearance before hydro test.• Hydro test witness as per Specifications.• Specification used Asme b31.3,Asme sec-ix for welding

Bppl,Cuttack,Odisha,India

Sr.Inspection Engineer(Qa/Qc)• Welding/Ndt Inspection of Boiler water wall tube,Economizer coil,Super heater coil,final super heater coil,Riser pipe,header,piping-BFD,MSL,CRH,HRH.• ,Fit up check before welding as per specifications.• Base material preheat check as per specification and requirments.• During welding check as per approved WPS.• Pwht/Welding and Ndt Inspection of material Sa 335 P91, Sa 335 P22, Sa 335 P11, Sa 335 P12,Sa 106 gr.b,c as per specifications requirement.• Pwht/Welding and Ndt Inspection of material Sa 213 T91, Sa 213 T22, Sa 213 T11, Sa 213 T12 as per specification.• Ultrasonic testing wittness as per specification and requirments.• Radiographic films interprations as per specifications.• Weld visual inspection as per requirments and specifications.• Coordination with client for mechanical clearance before hydro test.• Hydro test witness as per Specifications.• Specification used Asme b31.3,Asme sec-ix for weldingSS plate (304L) as per PO/TDC:NRBBU/03/MTL/TPT/1065/EPO/963. Review of melting process i.e. heat analysis, solution heat treatment, pickling and passivation.Witness Visual & Dimension as per ASTM A480.Witness surface finish, sample identification and stamping as per BARC TDC. Witness mechanical test like hardness test, tensile, yield strength, elongation as per ASTM A370.Witness IGC practice A & C as per ASTM A262.Witness Ultrasonic test (AUT & MUT) as per ASTM 577 & 578. Witness marking & packing as per BARC TDC.

Ntpl,Tamilnadu,India

QA/QC Engineer• Welding/Ndt Inspection of Boiler water wall tube,Economizer coil,Super heater coil,final super heater coil,Riser pipe,header,piping-BFD,MSL,CRH,HRH.• ,Fit up check before welding as per specifications.• Base material preheat check as per specification and requirments.• During welding check as per approved WPS.• Pwht/Welding and Ndt Inspection of material Sa 335 P91, Sa 335 P22, Sa 335 P11, Sa 335 P12,Sa 106 gr.b,c as per specifications requirement.• Pwht/Welding and Ndt Inspection of material Sa 213 T91, Sa 213 T22, Sa 213 T11, Sa 213 T12 as per specification.• Ultrasonic testing wittness as per specification and requirments.• Radiographic films interprations as per specifications.• Weld visual inspection as per requirments and specifications.• Coordination with client for mechanical clearance before hydro test.• Hydro test witness as per Specifications.• Specification used Asme b31.3,Asme sec-ix for welding

Bhusan Steel,Orissa,India

QA/QC Engineer(Heavy steel structure fabrication and erection.)• Inspection of raw material as per requirements.• Weld visual inspection.• Final dimension checked as per drawings.• Verification of Storage & backing of consumables.• Witnessed Welder Qualification and Welding procedures as per AWS D1.1.• Inspection of Fit-up & alignment as per approved drawings.• Check Calibration certificates of measuring tools and equipment’s as per requirement.• Painting and blasting check as per project specification.

Btech, Mechanical Engineering, First Class

Activities and Societies: cda sector 11 , Cuttack, Odisha,india

Certified Welding Inspector, Cswip3.1,Welding Inspector, First

Activities and Societies: welding and Ndt inspection