Derek Hall Email & Phone Number
@nationalgrid.com
LinkedIn matched
Who is Derek Hall? Overview
A concise factual answer block for searchers comparing this professional profile.
Derek Hall is listed as Shift Terminal Engineer at National Grid, a with 11558 employees, based in Rochester, England, United Kingdom. AeroLeads shows a work email signal at nationalgrid.com and a matched LinkedIn profile for Derek Hall.
Derek Hall previously worked as Operating Technician at National Grid and Operational Specialist at Air Products. Derek Hall holds Mechanical Engineering from Canterbury Technical College.
Email format at National Grid
This section adds company-level context without repeating Derek Hall's masked contact details.
AeroLeads found 1 current-domain work email signal for Derek Hall. Compare company email patterns before reaching out.
About Derek Hall
• Conducted maintenance, installation, commissioning and qualification of Mechanical and Instrument plant items.• Experienced in problem solving/trouble shooting and the use of change control to improve processing/safety/cGMP compliance.• Accomplished in the safe and efficient operation of a bulk pharmaceutical business unit.• Ensured effective communication within my team, peers and Senior Management.• Skilled in developing Operating Staff and carrying out training programs.• Led by example and motivated my team to ensure development and contributions were maximised.• Acquired and shared expertise to enable self and others to identify and address problems.• Contributed to the development and implementation of EHS systems by conducting safety meetings, audits and ensuring that staff were adequately trained.• Introduced/optimised new/existing processes, implemented continuous improvement and sponsored change.• Planned, organised and reviewed schedules to ensure they were in line with production/customer demand and departmental business plans (SAP/AS400).• Monitored trends, data and took corrective/preventative action to ensure processes were adequately controlled and that remedial action was effective and fully implemented.• Coordinated the development, approval and implementation of new and revised system specifications to enhance the efficiency and effectiveness of the operation.• Managed standards and procedures relating to Operations in order to meet quality, company and regulatory requirements.• Assessed and evaluated working practices and documentation, implementing changes and improvements as necessary to ensure that all regulatory and/or other relevant requirements are adhered to (Health and Safety, GMP).• Reviewed documents to assist in the improvement to the plant and process, User Requirement Specifications, Functional Specification, Installation Qualification/Operational Qualification, and SOP’s.
Listed skills include Supervision, Maintenance Engineering, Manufacturing Operations, Commissioning, and 34 others.
Derek Hall's current company
Company context helps verify the profile and gives searchers a useful next step.
Derek Hall work experience
A career timeline built from the work history available for this profile.
Operating Technician
Operational Specialist
Plant Supervisor
Supervising the operation of an Air Separation Unit (ASU) to provide the National Grid with Gaseous and Liquid Nitrogen for ballasting at their LNG importation facility. Provide Mechanical / Instrumentation and Operational support (permit to work, control room operations), conduct Planned Maintenance to both Mechanical and Instrument plant. Provide Operational support to ensure compliance with L8 guidance for Evaporative and Domestic Water Plant. Responsible for the maintenance, development and implementation of technical information, procedures and records. Proficient with the use of SAP for maintenance, stock control and planning activities.Conduct task based/manual handling risk assessments and highlight improvements.
Mechanical Maintenance Technician
Carry out pro-active/reactive maintenance activities to maximise production plant activities (freeze dried and spray dried coffee).Apply best practice manufacturing and engineering standards/principles to all tasks.Conduct task based/manual handling risk assessments and highlight improvements.Proficient with the use of SAP for maintenance, stock control and planning activities.
Controller Technician
Provide a multi-functional support role to the worlds first Personal Rapid Transport System (PRT) at Heathrow Terminal 5, covering a range of maintenance and operational functions (permit to work, control room operations).Responsible for the safe, efficient commissioning then operation of the PRT.Maintenance of system assets including control systems, radio, power and mechanical/electrical equipment.Responsible for the maintenance, development and implementation of technical information, procedures and records.Liaise with staff, BAA, contractors and other interested parties.Conduct task based/manual handling risk assessments and highlight improvements.
Plant Project Operator
Planned, organised and implemented the efficient and effective production and movement of materials/products to ensure customers, both internal and external, requirements were fulfilled. Departmental expert having in depth knowledge of the automated control systems, building management systems (HVAC) and process equipment for the purpose of ensuring production continuity, improvement, technical support, trouble shooting and conducting investigations (quality and incident).Local contact organising (planning, permit to work), supervising and conducting repair and maintenance activities (mechanical, instrumentation) when required.Commissioned interface between department waste gas stream and Thermal Oxidiser.
Production Team Leader
Trusted member of a small team, responsible for manufacture of high potency, high value drug substances. Team leader responsibilities included the safe operation of two fully automated, high containment, production facilities and the supervision of four production operators and maintenance staff.Due to the limited resources available the team leader is the shift expert with respect to both the plant and the process.Requirements also included a good working knowledge of process equipment including centrifuges/filters, dust/gas containment systems, HVAC/gas scrubbers, Refrigeration and Steam/Cooling water heat transfer systems.Due to the nature of the production facility it was required to organise (planning, permit to work), supervise and conduct repair and maintenance activities (mechanical, instrumentation) when required.
Instrument Technician
Part of a small team providing calibration, commissioning, repair and maintenance functions to both the research and manufacturing plants. Key requirements of the role included trouble shooting and rectification of faults on both plant items and process control systems/PLC’s.
Apprentice Mechanical Engineering Fitter / Turner
Responsible for the repair and maintenance of wide range of process equipment. The equipment range included Compressors, Centrifuges, Industrial Boilers, Air Handling units, Process Pumps, Sterilisers, Product Filter / Dryers, Fermenters and Refrigeration units.Chemical Industry Association young person of the year, southern region (award for promoting the Chemical Industry in the local community).
Colleagues at National Grid
Other employees you can reach at nationalgrid.com. View company contacts for 11558 employees →
Eugene Webster
Colleague at National GridPelham, New Hampshire, United States
View →
JJ
Jim Jones
Colleague at National GridGreater Coventry Area, United Kingdom
View →
JP
Jayne Piepenburg
Colleague at National GridCambridge, Massachusetts, United States
View →
DR
Darren Rivera
Colleague at National GridBrooklyn, New York, United States
View →
MK
Mohammad Khan
Colleague at National GridStaten Island, New York, United States
View →
RR
Ron Ron Chito
Colleague at National GridMedford, Massachusetts, United States
View →
CR
Chris Roden
Colleague at National GridNew York City Metropolitan Area, United States
View →
JC
Janet Clarke
Colleague at National GridGreater Manchester, England, United Kingdom
View →
JH
Josh Howsego
Colleague at National GridWaterlooville, England, United Kingdom
View →
JP
Josh Pasquariello
Colleague at National GridSyracuse, New York, United States
View →
Derek Hall education
Mechanical Engineering
Education record
Frequently asked questions about Derek Hall
Quick answers generated from the profile data available on this page.
What company does Derek Hall work for?
Derek Hall works for National Grid.
What is Derek Hall's role at National Grid?
Derek Hall is listed as Shift Terminal Engineer at National Grid.
What is Derek Hall's email address?
AeroLeads has found 1 work email signal at @nationalgrid.com for Derek Hall at National Grid.
Where is Derek Hall based?
Derek Hall is based in Rochester, England, United Kingdom while working with National Grid.
What companies has Derek Hall worked for?
Derek Hall has worked for National Grid, Air Products, Air Products And Chemicals, Nestle, and Advanced Transport Systems - Ultra Prt.
Who are Derek Hall's colleagues at National Grid?
Derek Hall's colleagues at National Grid include Eugene Webster, Jim Jones, Jayne Piepenburg, Darren Rivera, and Mohammad Khan.
How can I contact Derek Hall?
You can use AeroLeads to view verified contact signals for Derek Hall at National Grid, including work email, phone, and LinkedIn data when available.
What schools did Derek Hall attend?
Derek Hall holds Mechanical Engineering from Canterbury Technical College.
What skills is Derek Hall known for?
Derek Hall is listed with skills including Supervision, Maintenance Engineering, Manufacturing Operations, Commissioning, Continuous Improvement, Process Improvement, Safety Compliance, and Customer Focused.
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trialCheck these profiles if this is not the Derek Hall you were looking for.
View similar profiles