-Working on ‘Critical Equipment Parts Readiness’ (CEPR project) for Bruce Power. The project is to make critical spares Cat IDs ready for purchase. This will increase the Bruce Power ability to conduct planned work with high compliance and improved equipment reliability.-Responsible to make Cat IDs ready for purchase against 25 pre-defined acceptable attributes criteria and by performing PE Evaluation/IEE/Pre-screening etc. -EBOM (Equipment Bill of Materials) Prepare and Reviewer-AML (Approved Models List) updates

-Wolf Creek Nuclear Operating Corporation, Wolf Creek Generating Station-Reduced procurement requisition backlog from 1400 to 100, the lowest in the history of the WCNOC. -Supported major capital project as a procurement engineering at WCNOC, ESW piping replacement, ESW water hammer tower one of a kind in nuclear industry, SBO project, turbine digital project and currently working on dry cast project. -Identified Procurement Engineering Requirements for Purchase Requisitions and perform Commercial Grade Dedication (CGD) for replacement spares. -Verified all required documentation, technical, quality and Code requirements for the purchase specifications. -Provided Procurement Engineering support on engineering backlog. -Ensured that all work being performed in accordance with plant procedures, regulatory requirements and the applicable industry codes and standards such as 10 CFR 50 Appendix B, NQA-1, 10 CFR 50.49, EPRI NP-5652, EPRI NP- 6406, ASME QME-1, etc. -Updated Wolf Creek internal data bases (MPA.C/Curator) to capture component/application ties and documentation related to procurement. -Generated Service Labor requisitions for the purpose providing offsite/onsite related services. -Provided outage support on rotating shifts.

Wolf Creek Nuclear Operating Corporation, Wolf Creek Generating Station-Reduced procurement requisition backlog from 1400 to 100, the lowest in the history of the WCNOC. -Supported major capital project as a procurement engineering at WCNOC, ESW piping replacement, ESW water hammer tower one of a kind in nuclear industry, SBO project, turbine digital project and currently working on dry cast project. -Identified Procurement Engineering Requirements for Purchase Requisitions and perform Commercial Grade Dedication (CGD) for replacement spares. -Verified all required documentation, technical, quality and Code requirements for the purchase specifications. -Provided Procurement Engineering support on engineering backlog. -Ensured that all work being performed in accordance with plant procedures, regulatory requirements and the applicable industry codes and standards such as 10 CFR 50 Appendix B, NQA-1, 10 CFR 50.49, EPRI NP-5652, EPRI NP- 6406, ASME QME-1, etc. -Updated Wolf Creek internal data bases (MPA.C/Curator) to capture component/application ties and documentation related to procurement. -Generated Service Labor requisitions for the purpose providing offsite/onsite related services. -Provided outage support on rotating shifts.

-Responsible for Procurement Engineering Purchase Requisitions and Commercial Grade Dedication (CGD) for Replacement Spares. -Verified all required documentation, technical, quality and Code requirements for the purchase specifications. -Provided procurement engineering support on capital project providing technical and quality requirements on contract including spare parts for station black out, turbine control upgrade, fourth aux feed pump, ESW piping replacement and RCP seals. -Ensured that all work was performed in accordance with plant procedures, regulatory requirements and the applicable industry codes and standards such as 10 CFR 50 Appendix B, NQA-1, 10 CFR 50.49, EPRl NP-5652, EPRl NP- 6406 etc.-Updated Wolf Creek internal data bases (MPAC/Curator) to capture component/application ties and documentation related to procurement. -Generated Service Labor requisitions for the purpose providing off-site and on-site related services. -Provided outage support on rotating shifts.

-Xcel Energy, Prairie Island Nuclear Generating Plant-Responsible for Procurement Engineering Purchase Requisitions and Commercial Grade Dedication (CGD) for Replacement Spares. -Verified all required documentation, technical, quality and Code requirements for the purchase specifications. -Provided procurement engineering support to buyers resolve the QC discrepancy (OSD&D in Indus Passport) review equivalency evaluations for replacements items requirements. -Reviewed CGD to insure that it meets the current industry and procedure requirements.-Supported reduce outage and on line back log in procurement engineering. -Reviewed shelf-life expired item in warehouse.-Established shelf-life for new cat id (material stock number).

-Equipment Qualification and Commercial Grade and Procurement project manager for eight nuclear units in China. -Responsible for ensuring the parts are procured correctly and shipping, handling, storage requirements are established in accordance with NRC regulations and industry standards. -Prepared and issued conditional releases when necessary. -Developed and reviewed vendor's commercial dedication and EQ plans to comply with regulations and industry standards.-Conducted receipt inspections and close out non-conformances. -Performed technical evaluation, material classification and develop result-oriented solution. -Used SAP as a procurement tool to order components, parts and tracking the inventory. Create purchase orders and requisitions.-Ensured EQ and Commercial grade dedication work is performed in accordance with 10 CFR 50 Appendix B, NQA-1, 10 CFR 50.49, and industry standards such as EPRI NP-5652, EPRI NP- 6406, EPRl TR-107330, EPRl TR- 102260, GL 91-05 and IN 2011-01. -Responsible for completion of the above procurement and qualification tasks within budget and on schedule.

-Procurement Engineering Supervisor at the URENCO USA facility in Eunice, NM. This facility was for the enrichment of uranium. -Procurement engineering support for both operating units and units under construction. -Reviewed all purchase requisitions to ensure proper technical and quality requirements including ASME NQA-1 and 1OCFR 50 App. B requirements using SAP 6.0 software. -Interfaced with vendors to resolve anomalies such as discrepancies with part numbers, descriptions, etc. -Interfaced with all departments to ensure that configuration control is being maintained. -Work with Approved Suppliers (QL-1, QL-2) to ensure they are on the Approved Supplier List (ASL) and were qualified to supply products I perform required work for the UUSA facility.

-Reviewed of Engineering Documents and Provide Technical and Quality Requirements for Procurement Documents.-Approved Equivalency Evaluation, Commercial Grade Dedication Plan, Safety Classification Determination, Technical Specifications; Provide input to Design Engineering as needed.-Supervised Procurement Engineers and Bill of Materials personnel (Total of 11 personnel) to perform and review of procurement engineering documents and involved providing mentoring for new Procurement Engineers due to aging workforce.-Managed Materials Management Department in acting capacity if required by the Department Manager.-Performed reviews on job performance.-Wrote performance observations on training classes.-Wrote performance observations on work being performed and engineering documents.-Conducted Safety and Human Performance Meetings periodically.-Coordinated with other departments to resolve technical problems on material issues. -Experienced in usage of programs such as Indus Passport. -Participated in Obsolescence committee. -Performed Obsolescence evaluation and determined priority based on safety and criticality determination and mitigation measures for Obsolescence components, evaluation of Bill of Material, and interfaced with appropriate engineering disciplines.

-Wrote and reviewed equivalency evaluations for replacements items.-Wrote and reviewed dedication plans, procedures, and safety classification determinations.-Performed engineering evaluations on maintenance work activities.-Reviewed technical requirements and standards in purchase and repeat purchase requisitions.-Provided Technical and Quality Requirements on procurement documents.-Advised and maintained stocking levels.-Evaluated item necessity, resolved issues with purchase orders and items received.-Accessed the Internet to interface with other utilities and to search for parts.-Coordinated and resolved the issues with Material Testing Lab for Commercial Grade Items.-Resolved issues with Shelf-life and Preventive Maintenance of Stored Items.

-Evaluation of part replacements and commercial grade dedication of mechanical and HVAC parts.-Resolved decision issues that were equipment and parts related.

-Reviewed and evaluated design, qualifications and procurement documentation.-Prepared supporting calculations.-Reviewed test reports for adequacy, evaluated equipment and parts for commercial grade dedications.-Provided interface with the clients and with the suppliers to resolve problems as needed.

-Responsibilities included component information listing, classification and procurement of spare parts.-Performed engineering evaluations, commercial grade dedications.-Interfaced with EQ, maintenance and engineering disciplines, and reviewed equipment qualifications ensuring that configuration controls was maintained.

-Stress analysis of components and foundation load calculations to industry codes and standards. -Performed static and dynamic analysis of equipment implementation of design changes, reviewed as built drawings, mechanical class I penetrations stress report. -Reviewed seismic and environmental qualification reports. -Performed spare parts and procurement evaluations, developed master parts list, performed engineering evaluations of replacement parts, both technical and quality, establishing procurement requirements, and preparing commercial grade item dedication packages.

-Responsibilities included feasibility study for military truck program, adapted operating computer program for analyzing vehicle mechanics, and completed stress analysis of critical components.

-Worked on a finite element model utilizing the element analysis program.