Dongbin Lee Email & Phone Number
@oit.edu
LinkedIn matched
Who is Dongbin Lee? Overview
A concise factual answer block for searchers comparing this professional profile.
Dongbin Lee is listed as Assistant Professor at University of the Pacific, based in Stockton, California, United States. AeroLeads shows a work email signal at oit.edu and a matched LinkedIn profile for Dongbin Lee.
Dongbin Lee previously worked as Associate Professor at Oregon Institute Of Technology and Research Associate (Post-doctor) at Villanova University. Dongbin Lee holds Doctor Of Philosophy (Ph.D.), Intelligent Systems, Robotics, Mechatronics, Uas, Usv, Uuv, Haptics, And Autonomous Systems from Clemson University.
Email format at University of the Pacific
This section adds company-level context without repeating Dongbin Lee's masked contact details.
AeroLeads found 2 current-domain work email signals for Dongbin Lee. Compare company email patterns before reaching out.
About Dongbin Lee
▪After I served as a faculty member in MMET at OIT (Oregon Tech) where I have grown up as an educator and dedicated my enthusiasm to promote robotics-related course development including most summers volunteered or advised projects/student competitions, I started a new exploration at UOP from fall 22 with wonderful people who really care for each other and their development. I'll contribute to create cross-disciplined, multidisciplinary environments (experiential learning & research), prepare for future change to come up w/advanced, integrated curricula & activities for students & my careers. It's exciting while challenging but I dare say it is worth exploring and I would like to commit to make it! Here are so far my research expertise or interest (teaching experiences at the Experience link):- Amphibious Robotics/automation/haptics/sensing/autonomy- Digital/AI/machine-/deep learning/Vision/Connected-Autonomous-Sharing-Electrifying system- Data-mining/-logging/Hi-speed cloud parallel computing/CPS/Encryption/Network/Communications- Research on autonomous Food/Agricultural System (farming, orchard, vineyard) w aerial, ground, submersible vehicles to implement total sustainable solution w/hi-water quality- Plastic, Laser, Resin, Composites, Metal, 3D Printing/instrum. & measure. systems w/DAQ- State machine/adaptive/robust/output(state) feedback/optimal/modern controls/dynamical, stochastic methods- Sustainable, Efficient, and Renewable Energy generation/Power control w/management skillsto make systems & production lines super smart, connected. ▪ I can be an experienced professor with a demonstrated history of working in academia and manufacturing industries- Industrial experiences in automotive manufacturing; robotics and mechatronics, automated processing, high quality/productivity controls, precision manufacturing, and smart digital transformation. Additionally, experienced in total quality innovation team shortly for product testing & certification with technical references,- An education professional with postdoctoral experience in engineering, focused on autonomy, application of unmanned vehicles and robotics from underwater, vessel, and ground, to air, - Research focus on robotics, mechatronics, intelligent systems, vision and image processing, nonlinear controls, electromechanical systems, statistical/differential methods, learning and inference, or hybrid (additive and subtractive) smart manufacturing.• Personally, love to persistently challenging, improving, innovating, and keep learning related to tech fusion towards excellence.
Listed skills include Engineering, Higher Education, Robotics, Matlab, and 46 others.
Dongbin Lee's current company
Company context helps verify the profile and gives searchers a useful next step.
Dongbin Lee work experience
A career timeline built from the work history available for this profile.
Assistant Professor
• Affiliation: Computer Engineering, ECPE, School of Engineering and Computer Science, UOP• Teaching: Robotics, applied AI, Seminar,• Promote and facilitate student groups for great projects,1. SCC Club: Advisor of Solar-powered Racing Car Club Teams for 2022~24 Formula Sun Grand Prix competitions, 2. The advisor of Solar Regatta~~*ASME Club & Formula One - Only fall semester in '22 served as Co-advisor along with an advisor, Jeremy,** Mentoring or Advising on several Sr. projects in Eng Depts (8), • Involved in the school-wide goals and services:- Develop curricular for innovation and recognition in pedagogy, - Prep for state-of-the-art student-centered space/equipment/facilities, and- Recruiting committee.• Research: trying to currently solve a couple things 1. Morally responsible robotics using robotic tech and AI,2. Cooperative multi-agent autonomous systems with machine intelligence,3. Efficient Precision Agriculture by utilizing engineering & scientific skills: mitigate environmental effects, AI-based machine intelligent operations for drones and ground machines, pinpoint design for cultivating, harvesting, nature-friendly pesticide or vector control, economically affordable total sustainable approaches to Increase productivity for intelligent, precision Ag using robotic/automation & applied AI technologies in orchard, farming, or vineyard,• Scholarly Activities - Editor, Editorial board of Journals, Reviewer, - Writing papers and project proposals.
Associate Professor
(Sept'13-June'22-FT) June'13-Aug'13 (PT: summer but canceled)(1) My primary responsibility: teaching students to support MMET programs sa robotics, robot kinematics, statics, dynamics, automation, control systems, & instrumentation systems,(2) Offered electrically-based courses; Eng programming, Fun. of electric circuits, Power Systems, & automated Industrial controls(3) Director of Robotics and Automation Lab (2013-'22) to provide student-centered research & learning place, equipped w a variety of manufacturing industrial robots (FANUC,KUKA,GMFanuc,Mitsubishi), drones (uav), uncrewed submarines, mobile manipulator, ground robots w/LEGO robots, Arduino-/Raspberry-based line tracking, w/engineering tools, programming, & overhauling robotic systems (KUKA, Pneumatic Robotic Arm, 3D UAV Motion Testbed, Automation Devices)(4) Advised Sr. Capstone projects as the faculty member (13-22), mentor students' creative projects for Competitions, Catalyze (KF county) or InventOR State-level.(5) Served Dept committees, university-wide services, committees; GEAC, GE Teamwork, Facilities building, Innovation & Entrepreneurship, Drone advisory group, IAB, Open House for students(6) Graduate Program Director (20-21)(7) Served robotics club advisor (13-22; OTRC/AUVSIR) & projects, events, festivals for students' projects demo at Eng Weeks, Symposiums, IdeaFest and putting extra time in most Summers (8) PI/advisor of Oregon NASA granted projects: AFRIP (20-21), UTEAP (17-22)-rockets/amphibious robotics(9) Advised/mentored Robotics competitions (regional, national, global): VEX (judges), FTC, MATE(15), RoboSub competitions (16-22):"Most Innovative Design" award by IEEE OES/MBARI at 2018 RoboSub-Controls/Sensors (Navigation, Vision)/machine-/deep learning/AI/Autonomy/DAQ-Connected,Autonomous,Sharing,Electrifying(OregonBEST: semi-autonomous ATV vehicle for Agrobot)to make systems digitally transformed including production lines (See pics for the development of OIT robotics lab)
Research Associate (Post-Doctor)
My duties included at VU:• Projects: Autonomous systems/ autonomous systems research & education, sponsored by Office of Naval Research (ONR), 2009-2012 (FY-07/08, FY-09~11) as a post-doctor research fellow,• As the PI of "Unmanned Vehicle Demonstrators", built and tested autonomous robotic boat prototypes using onboard real-time embedded computer systems, developed algorithms; MATLAB/Simulink embedded SW on Speedgoat platform w/navigation sensors, prop & steering control, Hokuyo Lidar, image and vision sensing on TI board and two cameras (or a Logitech webcam), and developed GPS waypoint trajectory, finite state machine system. ME Dept & CENDAC (center 4 nonlinear dynamics and control), 2009-2012,• I took in charge of a couple of research and projects and another research is for electro-mechanical systems sponsored by NSWC under the guidance of Dr. Nataraj and Dr. Ashrafiuon while helping a few research of Ph.D. students. ONR w/NSWC Smart System Project: adaptive dynamic control algorithms for electromechanical valve-actuator systems, 2010-2012 (FY10-FY12),• Research on developing radar image processing and target identification algorithms on through-wall radar imaging (TWRI) enhancement, under the supervision of Prof. Amin/Dr. Ahmad in the Center for Advanced Communications (CAC) in 2012,• In addition, my heavy duty was mentoring annual student autonomous robotics competition projects (RoboBoat sponsored by ONR, AUVSI) as yearlong project since 2009 till 2012; VU student teams (ASV) has developed the prototype getting better and better for RoboBoat competitions. Eventually, led 2012 team to the second place (1st place at qualifying test en route to the finals) in RoboBoat Intl autonomous unmanned boat students robotics competition, Virginia Beach, VA, USA.
Senior Research Engineer
Duties Involved:• Research on Seebeck-based energy generation system• Development of Position Control Systems for Communications Tower System,• Performance Test of Antennae & Communications Tower,• Research on microstrip, satellite (Ku-, K-, C-bands), flat, maritime antennae production
Robotics And Control Engineer
Duties Involved: from design to production of robotic automated systems - design, manufacturing, operational programming of robots and materials handling systems, test inside, sometimes installation at the manufacturing lines and operation of production lines at Samsung, LG, Hyundai, SsangYong (SY) companies and their vendor companies.• Robotics and automation team in Technology Research Center at SYPIC (SsangYoung Precision Industry Company)- Developed material feeding, leveling, handling, transferring systems in collaboration with robots,- Developed robotic coil line systems, automated assembling/processing systems,- Developed robots and transfer units for tandem production lines in Automakers, Semiconductor, Display companies (Samsung, LG, GM-Daewoo, SsangYong, etc.) and their vendors- PLC (programmable logic controller) programming for installation of automated manufacturing lines using LG (GS) G7, Mitsubishi A7, or Allen-Bradley PLCs- Task force team of joint project between SYPIC and Japan's Ishikawajima-Harima heavy industries (IHI)(1994-1996) for SYMC tandem automation production lines- Control and Inspection engineer while "Quality Innovation Team" (1996-1997)- Developed technology and inspection standard and their documents for TUV-Ireland ISO9001/KSMA• Control & inspection engineer and Quality Innovation Team at SYPIC and SYMC (Motor Company)• "Best Engineer of the Year" award, 1996, SYPIC
Dongbin Lee education
Doctor Of Philosophy (Ph.D.), Intelligent Systems, Robotics, Mechatronics, Uas, Usv, Uuv, Haptics, And Autonomous Systems
Phd Coursework & Ms, Robotics (Formerly Control & Instrumentation Eng.), & Bs, Electronics/Com. Eng
Frequently asked questions about Dongbin Lee
Quick answers generated from the profile data available on this page.
What company does Dongbin Lee work for?
Dongbin Lee works for University of the Pacific.
What is Dongbin Lee's role at University of the Pacific?
Dongbin Lee is listed as Assistant Professor at University of the Pacific.
What is Dongbin Lee's email address?
AeroLeads has found 2 work email signals at @oit.edu for Dongbin Lee at University of the Pacific.
Where is Dongbin Lee based?
Dongbin Lee is based in Stockton, California, United States while working with University of the Pacific.
What companies has Dongbin Lee worked for?
Dongbin Lee has worked for University Of The Pacific, Oregon Institute Of Technology, Villanova University, Microface, Inc., and Ssangyoung Pic & Motor Company.
How can I contact Dongbin Lee?
You can use AeroLeads to view verified contact signals for Dongbin Lee at University of the Pacific, including work email, phone, and LinkedIn data when available.
What schools did Dongbin Lee attend?
Dongbin Lee holds Doctor Of Philosophy (Ph.D.), Intelligent Systems, Robotics, Mechatronics, Uas, Usv, Uuv, Haptics, And Autonomous Systems from Clemson University.
What skills is Dongbin Lee known for?
Dongbin Lee is listed with skills including Engineering, Higher Education, Robotics, Matlab, Research, Microsoft Office, Teaching, and University Teaching.
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trial