Endra Hanugroho Email & Phone Number

Australia

Coordinate the Company’s Internal Audit program.• Prepare annual audit schedules and report the audit status. • Perform system and process audits consistent with and confirming compliance with the Company’s Quality certification obligations (IATF16949/ISO 9001: 2015 and ISO14001: 2015 Environmental Management System)• Assist in auditing the Company’s processes, highlighting and addressing high-risk areas to achieve continuous improvement.• Monitor the progress of audits and… Show more Coordinate the Company’s Internal Audit program.• Prepare annual audit schedules and report the audit status. • Perform system and process audits consistent with and confirming compliance with the Company’s Quality certification obligations (IATF16949/ISO 9001: 2015 and ISO14001: 2015 Environmental Management System)• Assist in auditing the Company’s processes, highlighting and addressing high-risk areas to achieve continuous improvement.• Monitor the progress of audits and offer assistance and guidance to auditors where necessary.• Review audits performed by Internal Auditors for consistency and effectiveness.• Assist in nonconformance closure.Maintaining the Company’s Quality and Environmental Systems• Recommend changes to existing procedures and systems to ensure compliance with IATF16949 QMS and ISO14001: 2015 Environmental standards.• Update the Quality & Environmental Manuals and Procedures to reflect approved changes to existing practices and procedures.• Complete legal obligations compliance assessment for Carbon Revolution Environmental Aspects and Impact• Conduct environmental impact assessment. • Coordinate the annual surveillance and recertification audit for IATF 16949 and ISO 14001 with the certification body. Coordinate team to close surveillance and recertification audit nonconformances.• Administer the Carbon Revolution document control system, which supports our Quality Management (IATF 16949 / ISO 9001) and Environment Management (ISO 14001) systems. Show less

Melbourne, Australia

Coordinate the ISO 9001:2015 Internal Audit program. Coordinate and maintain the Aspect and Impact assessment and register. Coordinate the Corrective and Preventive Action related to Quality & Environment System.Coordinate the Calibration System and metrology.Assist in the Supplier development program.Drive continuous improvement through the company’s Internal Auditing and Corrective Action Systems.Plan, monitor and follow up all aspects of new product introduction as well… Show more Coordinate the ISO 9001:2015 Internal Audit program. Coordinate and maintain the Aspect and Impact assessment and register. Coordinate the Corrective and Preventive Action related to Quality & Environment System.Coordinate the Calibration System and metrology.Assist in the Supplier development program.Drive continuous improvement through the company’s Internal Auditing and Corrective Action Systems.Plan, monitor and follow up all aspects of new product introduction as well as changes to existing products through MCI PPS (Product Planning System). This includes contract review, internal documentation, sample submission and change note system.Responsible in conducting ISO 14001:2015 Environmental Aspect Review audit Show less

• Act as an OEM Customer direct contact related to quality (Kenworth-PACCAR Australia Pty Ltd, IVECO Trucks Australia Ltd, Hitachi, MTU Detroit Diesel Australia and etc.) • Involve in system development and completion of APQP/PPAP for OEM customer. Liaise with Sales Project Manager in developing IPP/ ITP (Initial Production Plan/Initial Test Plan) for Industrial’s customer. • Maintain Quality Management System (QMS) through Internal Audit and gap analysis. As a certified Lead Auditor… Show more • Act as an OEM Customer direct contact related to quality (Kenworth-PACCAR Australia Pty Ltd, IVECO Trucks Australia Ltd, Hitachi, MTU Detroit Diesel Australia and etc.) • Involve in system development and completion of APQP/PPAP for OEM customer. Liaise with Sales Project Manager in developing IPP/ ITP (Initial Production Plan/Initial Test Plan) for Industrial’s customer. • Maintain Quality Management System (QMS) through Internal Audit and gap analysis. As a certified Lead Auditor from Lloyd, assisted preparation of yearly Lloyd ISO 9001:2008 Surveillance and recertification Audit. • Receive customer report regarding faulty product or warranty claim, raise NCR and gather team and led 8D meeting accordingly. Implement of NCR counter measure and follow up NCR’s closure Conduct monthly review of Key Air Radiators Quality Indicators and follow up. • Responsible for regular part dimensional measurement for PPAP submission, prototype parts approval and/ or ongoing manufactured and assembled parts using various metrology equipments including 3D measurement using Faro Arm (6 axis measurement probe) and Polyworks software. • Liaise with external laboratory to conduct outsourced test such as material composition test, NDT test for failure investigation purpose. • Prepare & submit inspection report to customers including Initial Sample Inspection Report (ISIR) and regular Part Inspections Report approval.• Conducted warranty claim analysis in order to put appropriate action on any spikes of service issue related to parts and produced monthly warranty status. • Assist Purchasing to maintain supplier related quality performance.• Led process improvement projects with Operation and Manufacturing Engineer and maintaining process controls throughout production lines and cells by implementing PFMEA and Control plan. These projects also include commissioning equipments and tooling to support production. Show less

•Administer and present supplier performance trends analysis and reports to management on a regular basis. Developed and maintain Supplier Performance database.• Report and support rectification of nonconforming supplier parts. Assist supplier to ensure implementation of preventive action of problem. • Create new parts FAI (First Article Inspection) documentations. Manage completion of inspection and reports.• Create RIP/PIP (receiving inspection plan and process inspection plan) as… Show more •Administer and present supplier performance trends analysis and reports to management on a regular basis. Developed and maintain Supplier Performance database.• Report and support rectification of nonconforming supplier parts. Assist supplier to ensure implementation of preventive action of problem. • Create new parts FAI (First Article Inspection) documentations. Manage completion of inspection and reports.• Create RIP/PIP (receiving inspection plan and process inspection plan) as per drawing and specification requirements.• Visibility and management of part design change request.• Conduct new supplier capability audit, and regular supplier performance audit. • Source and select supplier for material, tooling, design service and parts pricing for Thales’ projects from development through production stages. (SOTAS Communication System, Rapid acquisition projects, Land 121 phase 3 and 4 for Single Cabin Bushmaster and Hawkei vehicles). • Develop cost modelling proposal for outsourced parts, risk assessment, make or buy assessment and selection of new suppliers to procure parts as per project Build of Material requirements. • Provide design engineering with costing for outsourced tooling, design service and parts.• Provide transactional buyer and planner the selected supplier, pricing structures and lead time of parts to commence with order. Making sure part delivered according to agreed schedule.• Liaise with Design Engineering team and suppliers during new part development to ensure customer requirements and design specif ication are met as per contract.•Ensure compliance to AS9100 for BAE (Nulka) & GE project. Ensure compliance to MIL standard, SAE and ISO9001 for all other projects. Show less

Indonesia

•Managed new model car deployment project from project kick-off preparation to mass production.•Managed timely completion of new parts development on selected local vendors. Managed a team of Design Engineer (Japan support team) to facilitate local suppliers during new parts development.•Managed team to verify trial part and specification test of new parts submitted by vendors.•Lead 5 stages of QAV-2 (Quality Assurance Visit) on suppliers during Supplier Selection Process through… Show more •Managed new model car deployment project from project kick-off preparation to mass production.•Managed timely completion of new parts development on selected local vendors. Managed a team of Design Engineer (Japan support team) to facilitate local suppliers during new parts development.•Managed team to verify trial part and specification test of new parts submitted by vendors.•Lead 5 stages of QAV-2 (Quality Assurance Visit) on suppliers during Supplier Selection Process through New Model & Part Localization Development and mass production. Arranged submission of trial parts for specifications test and completion of parts approval. Managed production trial of approved parts. Approved suppliers’ process quality control making sure MQS items has been implemented.•Managed team to compile parts problem history into Global Honda MQS database (manufacturing quality standard) •Feed MQS parts data into supplier’s Process Quality Control. •Prepared and presented regular Program Action Plan PDCA (Plan Do Check Action) reports on project to Honda top management.•Coordinated 6 project team and 21 quality officer on daily basis. Lead 17 vendors’ Project Manager during vendor’s production quality planning through five stages/levels of new model car development (QAV-2) and completion of parts supplier PPAP and PSW package submission and approval. Show less

Master Of Engineering, Engineering Management

Master of Engineering (Management)

Bachelor Of Engineering, Mechanical Engineering

Bachelor of Mechanical Engineering

Education record

Education record

Education record