-Resolving mechanical-piping problems at field and prepare “As Built” drawing and submit for approval.-Test Package preparation including test limit with mark up on P& ID and report.-Review, preparation/assembling project Test Packages, test limits and line check.-Surveillance for fit-up & welding, Keep record of daily inspections.-Dimensıonal inspections, PQR-WPQ, destructıve testıng wıttness.-Line checking and Punch listing/clearing, sign off / closeout documents as require for mechanical completion.-Stage wise inspection surface roughness and up to final coat DFT cross check as per approved ITP.-Witness testing of visual, service, hydro and pneumatic fluid testing schedules.Review the documents as per QAP.-Take measurements on site & fabricate random length pipes to spools, preparation of prefab weldolets & remove the existing cold/hot insulation for Hot Tapping (HT).-Inspection and Survey of casting items on behalf of TUV AUSTRIA.-Third party NDT technician’s approval.-Checked adherence to ensure that the procedures for construction, inspection, and testing are implemented in line with Project Specifications.-Quality Management; Inspection & Expediting.-Supplier Evaluation.-Vendor Evaluation, Expediting and Welding Inspection.

- Destructive Testing (Tensile Testing, Metal Shear Testing, Charpy Impact Testing, Bend Testing, etc.)- NDT for various industries including Oil & Gas, Manufacturing, Utilities, infrastructure, etc. - Mechanical testing and failure analysis,- Ferrite analysis testing, - Hardness testing, - Macro and macro examinations, - Z-Quality testing,- Replica testing,- XRF alloy analysis,- Welding Engineering- Welder & Weld Procedures Testing,- Welder testing in accordance with EN, ASME, CSA, and API Codes,- Welding procedure (WPS) design, testing, and documentation for new applications and repairs,- Welding procedure specifications to various codes & standards ASME, CWB, API, CSA, AWS.

- Checking the quality of the part, for both dimensional and welding aspects,- Ensuring the application of the logistic specification,- Rough estimation on spending time,- Feedback on the manufacturing status,- Reviewing the quality control sheet and propose improvements,- Reviewing the quality method and propose improvements,- Checking the compliance to quality system norm EN 15085-2,- Process: sequences and geometric strategy (references and clamping),- Spend time: rough analysis (shift/workers by op) about the spend time,- Reviewing industrial documentation for critical sub-assemblies:- Sharing the manufacturing status of the sub-assemblies (checked and ready to ship, blocked, still in manufacturing) using the shipping list as a base,- Checking the coherency of the shipping list and the application of the logistic specification.

SMS CONCAST AG-Inspection and Expediting works of machine manufacturing,-Conduct weekly progress meetings,-Witnessing NDT inspections and reviewing reports,-To witness the hydrostatic test,-Precision measurement control,-Final checks according to the technical drawing,-To prepare and present current manufacturer progress report,-Examination of all quality files.

RÖNESANS HOLDING - IZMIR KARŞIYAKA HILLTOWN SHOPPING CENTER PROJECT -Third party inspection of steel structure,-Witness and review of NDT activity ,-Witness and review of Torque inspection, -Welder qualification test and welding procedure qualification test applications (according to EN 9606-1),-Visual inspection, dimensional checks, project review in steel structure ( according to EN 1090-2),-Review and witnessing all welding activities as per the approved WPS (according to EN 15614-1),-Steel structure controls according to EN 1090-2 ,-Witnessing of dimensional control as per approved drawings and EN 1090-2,-Painting process inspection,-ITP and quality plan follow up.

TUPRAŞ IZMIR REFINERY - U7000 CDU REVAMP PROJECT-Verification that dimensions, fit-up and weld preparations are in accordance with specifications.-Evaluation of and preparation of inspection reports for the client.-Witness the Positive Material Identification.-Visual inspection and dimensional check of completed weldment against specification requirements and drawings.-Management and coordination of the Non-Destructive Testing team in project.-Performing the Visual inspection of the completed welds.-Resolving mechanical-piping problems at field and prepare “As Built” drawing and submit for approval.-Ensure the proper control and proper usage of welding consumables at the field.-Radiography film interpretation.

-Non-Destructive Testing (UT-RT-MT-PT-VT) making the tests,evaluations and reporting.-Witnessing and preparing of WPQR, WPS and WPQ certificates.-Preparing welding map and sequence.-EN 1090-1 / ISO 3834-2 / EN 15085-2 realizing of requirements of the standard.-The quality of following and reporting of manufacturing according to ITP. -Implementation of recruitment exams of welders.-Defining of the materials necessity suitability and determining the effect on the weld quality. -The detection of welding materials and equipment used to throughout all of the manufacturing according to be applied welding processes.-Practical and theoretical training of welders during practice.-Determination of corrective and preventive actions to reduce the rate of the welding defects and the implementation, follow-up and documentation.

STAR AEGEAN REFINERY PROJECT-Visual inspection according to ASME B31.3; supervising all subcontractors’ QA/QC activities.-Supervising of workshop inspections with maintaining QCP(Quality Control Plan), following NFI’s(Notification for inspection), inspection of offshore piles(Marine Works).-Supervising of welder qualification tests according to ISO 9606-1 and ASME SECTION IX.-Supervising of piping pressure tests( hydro tests, pneumatic tests). -Checking of welding consumables, related material certificates and electrode ovens, quivers on site. -Supervising of spool releasing activities according to related isometric drawings before painting and erection.-Reviewing test packs(NDE coverage according to piping class with SAIPEM WITS STARGATE, welder certificates, welder performance, nde rates before hydro test) -Verification of correctness of welding consumables (electrodes, filler wires, consumable inserts, gases, fluxes etc.) against the applicable welding procedure specifications-Verifying correctness and currency of related drawings and isometrics.(Redmark, As Built)-Surveillance during welding to verify compliance with specified procedures including any pre­heat, interpass temperature control and post-heating requirements, using inspection tools, gas flow-meters, amperemeters etc.-Verifying materials against documentation and markings.(Heat Numbers and material certificates)

- Interpretation of the intent and ensuring the requirements of codes, standards and specifications are met.- Ensuring that a procedure is available, has been approved and is being employed in production.-Witnessing the preparation of test plates/pipes and destructive tests and verifying compliance with appropriate standards and specifications.- Verifying that adequate and valid welder approvals are available, and that only approved welders are used in production.- Verifying parent material against documentation and markings.- Verification of correctness of welding consumables (electrodes, filler wires, consumable inserts, gases, fluxes etc.)- Verification that dimensions, fit-up and weld preparations are in accordance with specifications.- Verification that any required preheat is in accordance with the specified procedure.-Surveillance during welding to verify compliance with specified procedures including any preheat, inter-pass temperature control and post heat requirements.- Assistance and agreement with the preparation of Inspection and Test Plans (ITP’s).- Verification, when required that post weld heat treatment has been conducted in accordance with specification requirements.- Visual inspection and dimensional check of completed weldment against specification requirements and drawings.- The study and cognisance of NDT results on any welding work for which the welding inspector is responsible. Where the duties of the welding inspector include using NDT methods such as liquid penetrat, magnetic particle, radiography or ultrasonic inspection then it is suggested that he/she obtains certification in accordance with the related approval schemes.- Evaluation of and preparation of inspection reports for the employer or the client.- Maintenance of records for inspections carried out.

-Non-Destructive Testing (UT-RT-MT-PT-VT) and Destructive Testing (tensile ,bending,hardness, impact test etc.) making the tests,evaluations and reporting.-Management and coordination of the Non-Destructive Testing team in projects. -Quality responsible of the assigned area and discipline (Structural Steel, Storage Tanks, Piping ect.).-Witnessing and preparing of WPQR, WPS and WPQ certificates.-The realization of the 3rd Party Inspection and Auditing services.-Writing Non-Destructive Testing (UT-RT-MT-PT-VT) procedures and instructions.-Fit-up and resources related to industrial manufacturing-assembly activities,carrying out controls according to local norms, the project spects, PQR,WPS,ITP. -Plans the work scope of Non-Destructive Testing, arranges the tests and monitors their results as defined in the procedure or the contract specifications.-Witness of hydrostatic tests of LPG tanks, Boilers and pressure vessels (~35)-Advanced NDT UT(PA-TOFD) activities.-Writing Post Weld Heat Treatment (PWHT / Stress Relieving) procedures and instructions.-Inspection of Steel structure items on behalf of BUREAU VERITAS.-Inspection of Steel structure items on behalf of TUV NORD.

-Controlling the qualities and Preparation the documentations of offshore wind farm steel sections, ACC cooling towers, pressure vessels, columns, storage tanks, heat exchangers, mill bodies, conveyor lines, bunkers, annealing furnaces, casting ladles, naphtha furnaces, pipeline, rotary dryers, pulse jet filters and many more types of high tech steel projects. -Preparing track of all abnormalities and defects, solve problems and reporting of results.-Control of welding process to achieve the quality/delivery /cost targets of the plant.-Define the necessary equipment and inventory, based on the production concept.-Welding Consumables Certificates, Welders Certificate, Welding Procedures and Follow-up of NDT Jobs.-Visual inspection of welds during production.-Prepares welding documentation for related projects.-Reporting and checking of paint.

GULERMAK & DOĞUŞ Ordinary Partnership-Metro Project-Construction coordination meetings with consultant and resolving field conflicts and problems for MEP, reviewing progress against programmers, reviewing drawings & materials against specification. Anchoring and planning installation & commissioning activities of various equipment’s conducting tests & inspections to ensure operational effectiveness of utilities.

-Chemical composition review, micro analysis, mechanical properties evaluation for all casting parts.-Maintaining the sand properties and controlling its variations.-Failure analysis and handling the customer complaints.-To analyze the raw material selection, chemical composition, microstructure, mechanical properties, sand properties for developing the new products.-Maintaining all records in laboratory.